From: Chanh Nguyen Date: Tue, 6 Aug 2024 07:18:02 +0000 Subject: [PATCH v2 1/5] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors In-Reply-To: <20240806071806.1666550-1-chanh@os.amperecomputing.com> References: <20240806071806.1666550-1-chanh@os.amperecomputing.com> Message-ID: <20240806071806.1666550-2-chanh@os.amperecomputing.com> List-Id: To: linux-aspeed@lists.ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Define I2C alias ports from I2C Switch 0x70 at BMC I2C5. Add the tmp421 sensors via the I2C alias ports as OCP device temperature sensors. Signed-off-by: Chanh Nguyen --- Changes in v2: - None --- .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts | 16 +++++++++++ .../aspeed/aspeed-bmc-ampere-mtmitchell.dts | 28 +++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts index 8ab5f301f926..8102f41d1d15 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts @@ -49,6 +49,11 @@ aliases { */ i2c80 = &nvme_m2_0; i2c81 = &nvme_m2_1; + + /* + * i2c bus 82 assigned to OCP slot + */ + i2c82 = &ocpslot; }; chosen { @@ -420,6 +425,17 @@ i2c-mux at 70 { reg = <0x70>; i2c-mux-idle-disconnect; + ocpslot: i2c at 0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_temp: temperature-sensor at 1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + nvmeslot_0_7: i2c at 3 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts index 3c8925034a8c..3a97e88278d5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts @@ -15,6 +15,12 @@ aliases { serial7 = &uart8; serial8 = &uart9; + /* + * i2c bus 30-31 assigned to OCP slot 0-1 + */ + i2c30 = &ocpslot_0; + i2c31 = &ocpslot_1; + /* * I2C NVMe alias port */ @@ -515,6 +521,28 @@ i2c-mux at 70 { #size-cells = <0>; reg = <0x70>; i2c-mux-idle-disconnect; + + ocpslot_0: i2c at 0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ocpslot_0_temp: temperature-sensor at 1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; + + ocpslot_1: i2c at 1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + ocpslot_1_temp: temperature-sensor at 1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + }; }; }; -- 2.43.0