Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 07842D3C93E for ; Mon, 21 Oct 2024 04:41:25 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 011D18925E; Mon, 21 Oct 2024 06:41:16 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="aVOnjxf9"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 29369891E9; Mon, 21 Oct 2024 06:41:15 +0200 (CEST) Received: from lelv0142.ext.ti.com (lelv0142.ext.ti.com [198.47.23.249]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 378168924B for ; Mon, 21 Oct 2024 06:41:11 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=s-k6@ti.com Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 49L4f9LZ053168; Sun, 20 Oct 2024 23:41:09 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1729485669; bh=oIYLfMVVs/sT16seYoaUfyZTdsKVet+km5lx4elHF2I=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=aVOnjxf90cZqaygKunT5WftA/tfNf6KDcShuV5iT1Q/ao6IqVyekYEKfQJUt/9KeW dAb54O56F3Ueu/SQUeIWqZFbpQqskHTYzS9RWbtT9Fk08zxII4T91MGS0OKqiE88OQ phS7WJtfgNliIhAVLkn4xq+48VPc+8X/Eh2d6160= Received: from DLEE112.ent.ti.com (dlee112.ent.ti.com [157.170.170.23]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 49L4f9n7121017 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Sun, 20 Oct 2024 23:41:09 -0500 Received: from DLEE114.ent.ti.com (157.170.170.25) by DLEE112.ent.ti.com (157.170.170.23) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Sun, 20 Oct 2024 23:41:08 -0500 Received: from lelvsmtp6.itg.ti.com (10.180.75.249) by DLEE114.ent.ti.com (157.170.170.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Sun, 20 Oct 2024 23:41:08 -0500 Received: from santhoshkumark.dhcp.ti.com (santhoshkumark.dhcp.ti.com [172.24.227.241]) by lelvsmtp6.itg.ti.com (8.15.2/8.15.2) with ESMTP id 49L4f2ts059251; Sun, 20 Oct 2024 23:41:06 -0500 From: Santhosh Kumar K To: , , , , , CC: , , , Subject: [PATCH v4 1/8] ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming Date: Mon, 21 Oct 2024 10:10:17 +0530 Message-ID: <20241021044024.835846-2-s-k6@ti.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241021044024.835846-1-s-k6@ti.com> References: <20241021044024.835846-1-s-k6@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Georgi Vlaev The 1-bit inline ECC support in TI's DDRSS bridge requires the configured memory regions to be preloaded with a pattern before use. This is done by the k3-ddrss driver from the R5 SPL in a 'for' loop. It takes around 10 seconds to fill 2GB of memory, for example. Memset can cut the time in half and using DMA currently yields a similar result. The BIST engine of DDR controller provides support for initializing any memory region with a pattern. This bypasses the DDRSS bridge, so the required inline ECC data is not computed and populated in the memory. For some values like zero, the computed ECC syndrome is also zero and we can use these values to preload the memory from the DDR controller, without the assistance of the bridge. The registers involved in the process are described in the 'DDR controller registers' topic in [1] AM62 and [2] J721E reference manuals. The patch replaces the 'for' loop memory fill function with the BIST memory initialization procedure. This cuts the time to preload the 2GB memory from 10 seconds down to 1 second. The bist preload function uses the lpddr4 APIs in the k3-ddrss, so this is compatible with devices with both 16-bit LPDDR4 and 32-bit LPDDR4 interfaces (e.g J721E). [1] AM62x: https://www.ti.com/lit/pdf/spruiv7 [2] DRA829/TDA4VM: https://www.ti.com/lit/zip/spruil1 Signed-off-by: Georgi Vlaev Signed-off-by: Santhosh Kumar K --- drivers/ram/k3-ddrss/k3-ddrss.c | 122 +++++++++++++++++++++++++++++--- 1 file changed, 114 insertions(+), 8 deletions(-) diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c index 525b6d5b79fc..f2ab8cf2b49b 100644 --- a/drivers/ram/k3-ddrss/k3-ddrss.c +++ b/drivers/ram/k3-ddrss/k3-ddrss.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -553,14 +554,118 @@ static void k3_ddrss_set_ecc_range_r0(u32 base, u32 start_address, u32 size) writel((start_address + size - 1) >> 16, base + DDRSS_ECC_R0_END_ADDR_REG); } -static void k3_ddrss_preload_ecc_mem_region(u32 *addr, u32 size, u32 word) +#define BIST_MODE_MEM_INIT 4 +#define BIST_MEM_INIT_TIMEOUT 10000 /* 1msec loops per block = 10s */ +static void k3_lpddr4_bist_init_mem_region(struct k3_ddrss_desc *ddrss, + u64 addr, u64 size, + u32 pattern) { - int i; + lpddr4_obj *driverdt = ddrss->driverdt; + lpddr4_privatedata *pd = &ddrss->pd; + u32 status, offset, regval; + bool int_status; + int i = 0; + + /* Set BIST_START_ADDR_0 [31:0] */ + regval = (u32)(addr & TH_FLD_MASK(LPDDR4__BIST_START_ADDRESS_0__FLD)); + TH_OFFSET_FROM_REG(LPDDR4__BIST_START_ADDRESS_0__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Set BIST_START_ADDR_1 [32 or 34:32] */ + regval = (u32)(addr >> TH_FLD_WIDTH(LPDDR4__BIST_START_ADDRESS_0__FLD)); + regval &= TH_FLD_MASK(LPDDR4__BIST_START_ADDRESS_1__FLD); + TH_OFFSET_FROM_REG(LPDDR4__BIST_START_ADDRESS_1__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Set ADDR_SPACE = log2(size) */ + regval = (u32)(ilog2(size) << TH_FLD_SHIFT(LPDDR4__ADDR_SPACE__FLD)); + TH_OFFSET_FROM_REG(LPDDR4__ADDR_SPACE__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Enable the BIST data check. On 32bit lpddr4 (e.g J7) this shares a + * register with ADDR_SPACE and BIST_GO. + */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_DATA_CHECK__REG, CTL_SHIFT, offset); + driverdt->readreg(pd, LPDDR4_CTL_REGS, offset, ®val); + regval |= TH_FLD_MASK(LPDDR4__BIST_DATA_CHECK__FLD); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + /* Clear the address check bit */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_ADDR_CHECK__REG, CTL_SHIFT, offset); + driverdt->readreg(pd, LPDDR4_CTL_REGS, offset, ®val); + regval &= ~TH_FLD_MASK(LPDDR4__BIST_ADDR_CHECK__FLD); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Set BIST_TEST_MODE[2:0] to memory initialize (4) */ + regval = BIST_MODE_MEM_INIT; + TH_OFFSET_FROM_REG(LPDDR4__BIST_TEST_MODE__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Set BIST_DATA_PATTERN[31:0] */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_DATA_PATTERN_0__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, pattern); + + /* Set BIST_DATA_PATTERN[63:32] */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_DATA_PATTERN_1__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, pattern); + + udelay(1000); + + /* Enable the programmed BIST operation - BIST_GO = 1 */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_GO__REG, CTL_SHIFT, offset); + driverdt->readreg(pd, LPDDR4_CTL_REGS, offset, ®val); + regval |= TH_FLD_MASK(LPDDR4__BIST_GO__FLD); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, regval); + + /* Wait for the BIST_DONE interrupt */ + while (i < BIST_MEM_INIT_TIMEOUT) { + status = driverdt->checkctlinterrupt(pd, LPDDR4_INTR_BIST_DONE, + &int_status); + if (!status & int_status) { + /* Clear LPDDR4_INTR_BIST_DONE */ + driverdt->ackctlinterrupt(pd, LPDDR4_INTR_BIST_DONE); + break; + } + udelay(1000); + i++; + } - printf("ECC is enabled, priming DDR which will take several seconds.\n"); + /* Before continuing we have to stop BIST - BIST_GO = 0 */ + TH_OFFSET_FROM_REG(LPDDR4__BIST_GO__REG, CTL_SHIFT, offset); + driverdt->writereg(pd, LPDDR4_CTL_REGS, offset, 0); + + /* Timeout hit while priming the memory. We can't continue, + * since the memory is not fully initialized and we most + * likely get an uncorrectable error exception while booting. + */ + if (i == BIST_MEM_INIT_TIMEOUT) { + printf("ERROR: Timeout while priming the memory.\n"); + hang(); + } +} - for (i = 0; i < (size / 4); i++) - addr[i] = word; +static void k3_ddrss_lpddr4_preload_full_mem(struct k3_ddrss_desc *ddrss, + u64 total_size, u32 pattern) +{ + u32 done, max_size2; + + /* Get the max size (log2) supported in this config (16/32 lpddr4) + * from the start_addess width - 16bit: 8G, 32bit: 32G + */ + max_size2 = TH_FLD_WIDTH(LPDDR4__BIST_START_ADDRESS_0__FLD) + + TH_FLD_WIDTH(LPDDR4__BIST_START_ADDRESS_1__FLD) + 1; + + /* ECC is enabled in dt but we can't preload the memory if + * the memory configuration is recognized and supported. + */ + if (!total_size || total_size > (1ull << max_size2) || + total_size & (total_size - 1)) { + printf("ECC: the memory configuration is not supported\n"); + hang(); + } + printf("ECC is enabled, priming DDR which will take several seconds.\n"); + done = get_timer(0); + k3_lpddr4_bist_init_mem_region(ddrss, 0, total_size, pattern); + printf("ECC: priming DDR completed in %lu msec\n", get_timer(done)); } static void k3_ddrss_lpddr4_ecc_calc_reserved_mem(struct k3_ddrss_desc *ddrss) @@ -588,9 +693,10 @@ static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc *ddrss) writel(DDRSS_ECC_CTRL_REG_ECC_EN | DDRSS_ECC_CTRL_REG_RMW_EN | DDRSS_ECC_CTRL_REG_WR_ALLOC, base + DDRSS_ECC_CTRL_REG); - /* Preload ECC Mem region with 0's */ - k3_ddrss_preload_ecc_mem_region((u32 *)ecc_region_start, ecc_range, - 0x00000000); + /* Preload the full memory with 0's using the BIST engine of + * the LPDDR4 controller. + */ + k3_ddrss_lpddr4_preload_full_mem(ddrss, gd->ram_size, 0); /* Clear Error Count Register */ writel(0x1, base + DDRSS_ECC_1B_ERR_CNT_REG); -- 2.34.1