Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 351BDE77188 for ; Mon, 6 Jan 2025 09:08:53 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 5C409805D7; Mon, 6 Jan 2025 10:08:06 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="pIrW05RL"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 244F5805FD; Mon, 6 Jan 2025 10:08:05 +0100 (CET) Received: from lelv0142.ext.ti.com (lelv0142.ext.ti.com [198.47.23.249]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E1E29805D7 for ; Mon, 6 Jan 2025 10:07:57 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=s-k6@ti.com Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 50697uQk094895; Mon, 6 Jan 2025 03:07:56 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1736154476; bh=FoL3hV56E3BUCVK3fsT3R+urxQzXQdbchzR7o6xxD5k=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=pIrW05RLvZ1cVJ6mh5UyFGPfhSwvwPkEJDSYix6RSOs0e9OTNIgjK7pM+eTd6JI+d zShKSDbILXkQB+4NDDg4CCj2FpSNMIe62egH4n1O6C67Oad99X6bIXueb/EALxAsp0 jGi+WrrWEpslPgin7efJobAUptoLFq+adO9rV5Qg= Received: from DFLE112.ent.ti.com (dfle112.ent.ti.com [10.64.6.33]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 50697uvw029756 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 6 Jan 2025 03:07:56 -0600 Received: from DFLE107.ent.ti.com (10.64.6.28) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23; Mon, 6 Jan 2025 03:07:55 -0600 Received: from lelvsmtp6.itg.ti.com (10.180.75.249) by DFLE107.ent.ti.com (10.64.6.28) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2507.23 via Frontend Transport; Mon, 6 Jan 2025 03:07:55 -0600 Received: from santhoshkumark.dhcp.ti.com (santhoshkumark.dhcp.ti.com [172.24.227.241]) by lelvsmtp6.itg.ti.com (8.15.2/8.15.2) with ESMTP id 50697Jue103050; Mon, 6 Jan 2025 03:07:52 -0600 From: Santhosh Kumar K To: , , , , , , , CC: , , , Subject: [PATCH v6 9/9] board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled Date: Mon, 6 Jan 2025 14:37:08 +0530 Message-ID: <20250106090708.1541212-10-s-k6@ti.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20250106090708.1541212-1-s-k6@ti.com> References: <20250106090708.1541212-1-s-k6@ti.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean As there are few redundant functions in board/ti/*/evm.c files, pull them to a common location of access to reuse and include the common file to access the functions. Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the device tree and resize the available amount of DDR, if ECC is enabled. Otherwise, fixup the device tree using the regular fdt_fixup_memory_banks(). Also call dram_init_banksize() after every call to fixup_ddr_driver_for_ecc() is made so that gd->bd is populated correctly. Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR controllers present. Signed-off-by: Santhosh Kumar K Signed-off-by: Neha Malcom Francis Reviewed-by: Wadim Egorov --- arch/arm/mach-k3/Makefile | 2 +- arch/arm/mach-k3/include/mach/k3-ddr.h | 15 ++++++ arch/arm/mach-k3/k3-ddr.c | 72 +++++++++++++++++++++++++ board/ti/am62ax/evm.c | 17 +++--- board/ti/am62px/evm.c | 17 +++--- board/ti/am62x/evm.c | 63 +++------------------- board/ti/am64x/evm.c | 73 +++----------------------- board/ti/am65x/evm.c | 29 +--------- board/ti/common/Makefile | 1 + board/ti/common/k3-ddr.c | 33 ++++++++++++ board/ti/common/k3-ddr.h | 12 +++++ board/ti/j721e/evm.c | 29 +--------- board/ti/j721s2/evm.c | 35 ++++-------- board/ti/j722s/evm.c | 17 +++--- board/ti/j784s4/evm.c | 17 +++--- 15 files changed, 200 insertions(+), 232 deletions(-) create mode 100644 arch/arm/mach-k3/include/mach/k3-ddr.h create mode 100644 arch/arm/mach-k3/k3-ddr.c create mode 100644 board/ti/common/k3-ddr.c create mode 100644 board/ti/common/k3-ddr.h diff --git a/arch/arm/mach-k3/Makefile b/arch/arm/mach-k3/Makefile index 8c4f6786a5b5..5ce7fc62d80c 100644 --- a/arch/arm/mach-k3/Makefile +++ b/arch/arm/mach-k3/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_ARM64) += arm64/ obj-$(CONFIG_CPU_V7R) += r5/ obj-$(CONFIG_OF_LIBFDT) += common_fdt.o -obj-y += common.o security.o +obj-y += common.o security.o k3-ddr.o obj-$(CONFIG_SOC_K3_AM62A7) += am62ax/ obj-$(CONFIG_SOC_K3_AM62P5) += am62px/ obj-$(CONFIG_SOC_K3_AM625) += am62x/ diff --git a/arch/arm/mach-k3/include/mach/k3-ddr.h b/arch/arm/mach-k3/include/mach/k3-ddr.h new file mode 100644 index 000000000000..95496e1c59dc --- /dev/null +++ b/arch/arm/mach-k3/include/mach/k3-ddr.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2024, Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef _K3_DDR_H_ +#define _K3_DDR_H_ + +int dram_init(void); +int dram_init_banksize(void); + +void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image); +void fixup_memory_node(struct spl_image_info *spl_image); + +#endif /* _K3_DDR_H_ */ diff --git a/arch/arm/mach-k3/k3-ddr.c b/arch/arm/mach-k3/k3-ddr.c new file mode 100644 index 000000000000..6e3e60cdc865 --- /dev/null +++ b/arch/arm/mach-k3/k3-ddr.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024, Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include +#include +#include + +#include + +__weak int dram_init(void) +{ + return 0; +} + +__weak int dram_init_banksize(void) +{ + return 0; +} + +#if defined(CONFIG_SPL_BUILD) +void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image) +{ + struct udevice *dev; + int ret, ctr = 1; + + dram_init_banksize(); + + ret = uclass_get_device(UCLASS_RAM, 0, &dev); + if (ret) + panic("Cannnot get RAM device for ddr size fixup: %d\n", ret); + + ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd); + if (ret) + printf("Error fixing up ddr node for ECC use! %d\n", ret); + + ret = uclass_next_device_err(&dev); + + while (ret && ret != -ENODEV) { + ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd); + if (ret) + printf("Error fixing up ddr node %d for ECC use! %d\n", ctr, ret); + + ret = uclass_next_device_err(&dev); + ctr++; + } +} + +void fixup_memory_node(struct spl_image_info *spl_image) +{ + u64 start[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + int bank; + int ret; + + dram_init(); + dram_init_banksize(); + + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + start[bank] = gd->bd->bi_dram[bank].start; + size[bank] = gd->bd->bi_dram[bank].size; + } + + ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, + CONFIG_NR_DRAM_BANKS); + + if (ret) + printf("Error fixing up memory node! %d\n", ret); +} +#endif diff --git a/board/ti/am62ax/evm.c b/board/ti/am62ax/evm.c index 62d3664936e7..3351544c5b37 100644 --- a/board/ti/am62ax/evm.c +++ b/board/ti/am62ax/evm.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../common/fdt_ops.h" @@ -20,15 +21,17 @@ int board_init(void) return 0; } -int dram_init(void) +#if defined(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) { - return fdtdec_setup_mem_size_base(); -} - -int dram_init_banksize(void) -{ - return fdtdec_setup_memory_banksize(); + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } +#endif #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) diff --git a/board/ti/am62px/evm.c b/board/ti/am62px/evm.c index 7362fa4520a3..75359fa1614c 100644 --- a/board/ti/am62px/evm.c +++ b/board/ti/am62px/evm.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "../common/fdt_ops.h" struct efi_fw_image fw_images[] = { @@ -53,15 +54,17 @@ int board_init(void) return 0; } -int dram_init(void) +#if defined(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) { - return fdtdec_setup_mem_size_base(); -} - -int dram_init_banksize(void) -{ - return fdtdec_setup_memory_banksize(); + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } +#endif #if IS_ENABLED(CONFIG_BOARD_LATE_INIT) int board_late_init(void) diff --git a/board/ti/am62x/evm.c b/board/ti/am62x/evm.c index 9075df01cac6..279ceba95547 100644 --- a/board/ti/am62x/evm.c +++ b/board/ti/am62x/evm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "../common/fdt_ops.h" @@ -86,11 +87,6 @@ int board_init(void) return 0; } -int dram_init(void) -{ - return fdtdec_setup_mem_size_base(); -} - #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { @@ -99,13 +95,7 @@ int board_late_init(void) } #endif -int dram_init_banksize(void) -{ - return fdtdec_setup_memory_banksize(); -} - #if defined(CONFIG_XPL_BUILD) - void spl_board_init(void) { enable_caches(); @@ -114,53 +104,14 @@ void spl_board_init(void) } -#if defined(CONFIG_K3_AM64_DDRSS) -static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image) -{ - struct udevice *dev; - int ret; - - dram_init_banksize(); - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) - panic("Cannot get RAM device for ddr size fixup: %d\n", ret); - - ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd); - if (ret) - printf("Error fixing up ddr node for ECC use! %d\n", ret); -} -#else -static void fixup_memory_node(struct spl_image_info *spl_image) -{ - u64 start[CONFIG_NR_DRAM_BANKS]; - u64 size[CONFIG_NR_DRAM_BANKS]; - int bank; - int ret; - - dram_init(); - dram_init_banksize(); - - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { - start[bank] = gd->bd->bi_dram[bank].start; - size[bank] = gd->bd->bi_dram[bank].size; - } - - /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */ - ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, - CONFIG_NR_DRAM_BANKS); - if (ret) - printf("Error fixing up memory node! %d\n", ret); -} -#endif - void spl_perform_fixups(struct spl_image_info *spl_image) { -#if defined(CONFIG_K3_AM64_DDRSS) - fixup_ddr_driver_for_ecc(spl_image); -#else - fixup_memory_node(spl_image); -#endif + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } #endif diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c index 00b8317d6bf9..6f7e1f828668 100644 --- a/board/ti/am64x/evm.c +++ b/board/ti/am64x/evm.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "../common/board_detect.h" #include "../common/fdt_ops.h" @@ -66,28 +67,6 @@ int board_init(void) return 0; } -int dram_init(void) -{ - s32 ret; - - ret = fdtdec_setup_mem_size_base(); - if (ret) - printf("Error setting up mem size and base. %d\n", ret); - - return ret; -} - -int dram_init_banksize(void) -{ - s32 ret; - - ret = fdtdec_setup_memory_banksize(); - if (ret) - printf("Error setting up memory banksize. %d\n", ret); - - return ret; -} - #if defined(CONFIG_SPL_LOAD_FIT) int board_fit_config_name_match(const char *name) { @@ -132,52 +111,14 @@ static int fixup_usb_boot(const void *fdt_blob) } #endif -#if defined(CONFIG_K3_AM64_DDRSS) -static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image) -{ - struct udevice *dev; - int ret; - - dram_init_banksize(); - - ret = uclass_get_device(UCLASS_RAM, 0, &dev); - if (ret) - panic("Cannot get RAM device for ddr size fixup: %d\n", ret); - - ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd); - if (ret) - printf("Error fixing up ddr node for ECC use! %d\n", ret); -} -#else -static void fixup_memory_node(struct spl_image_info *spl_image) -{ - u64 start[CONFIG_NR_DRAM_BANKS]; - u64 size[CONFIG_NR_DRAM_BANKS]; - int bank; - int ret; - - dram_init(); - dram_init_banksize(); - - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { - start[bank] = gd->bd->bi_dram[bank].start; - size[bank] = gd->bd->bi_dram[bank].size; - } - - /* dram_init functions use SPL fdt, and we must fixup u-boot fdt */ - ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, CONFIG_NR_DRAM_BANKS); - if (ret) - printf("Error fixing up memory node! %d\n", ret); -} -#endif - void spl_perform_fixups(struct spl_image_info *spl_image) { -#if defined(CONFIG_K3_AM64_DDRSS) - fixup_ddr_driver_for_ecc(spl_image); -#else - fixup_memory_node(spl_image); -#endif + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } #if CONFIG_IS_ENABLED(USB_STORAGE) fixup_usb_boot(spl_image->fdt_addr); diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c index 07073a5940b1..6658794a1375 100644 --- a/board/ti/am65x/evm.c +++ b/board/ti/am65x/evm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "../common/board_detect.h" #include "../common/fdt_ops.h" @@ -49,17 +50,6 @@ int board_init(void) return 0; } -int dram_init(void) -{ -#ifdef CONFIG_PHYS_64BIT - gd->ram_size = 0x100000000; -#else - gd->ram_size = 0x80000000; -#endif - - return 0; -} - phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { #ifdef CONFIG_PHYS_64BIT @@ -71,23 +61,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) return gd->ram_top; } -int dram_init_banksize(void) -{ - /* Bank 0 declares the memory available in the DDR low region */ - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = 0x80000000; - gd->ram_size = 0x80000000; - -#ifdef CONFIG_PHYS_64BIT - /* Bank 1 declares the memory available in the DDR high region */ - gd->bd->bi_dram[1].start = 0x880000000; - gd->bd->bi_dram[1].size = 0x80000000; - gd->ram_size = 0x100000000; -#endif - - return 0; -} - #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { diff --git a/board/ti/common/Makefile b/board/ti/common/Makefile index 5ac361ba7fcf..caf6b9fa8c14 100644 --- a/board/ti/common/Makefile +++ b/board/ti/common/Makefile @@ -4,3 +4,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o obj-${CONFIG_OF_LIBFDT} += fdt_ops.o +obj-${CONFIG_ARCH_K3} += k3-ddr.o diff --git a/board/ti/common/k3-ddr.c b/board/ti/common/k3-ddr.c new file mode 100644 index 000000000000..a8425da8de5c --- /dev/null +++ b/board/ti/common/k3-ddr.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2024, Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include +#include +#include +#include + +#include "k3-ddr.h" + +int dram_init(void) +{ + s32 ret; + + ret = fdtdec_setup_mem_size_base_lowest(); + if (ret) + printf("Error setting up mem size and base. %d\n", ret); + + return ret; +} + +int dram_init_banksize(void) +{ + s32 ret; + + ret = fdtdec_setup_memory_banksize(); + if (ret) + printf("Error setting up memory banksize. %d\n", ret); + + return ret; +} diff --git a/board/ti/common/k3-ddr.h b/board/ti/common/k3-ddr.h new file mode 100644 index 000000000000..737d45e2e509 --- /dev/null +++ b/board/ti/common/k3-ddr.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2024, Texas Instruments Incorporated - https://www.ti.com/ + */ + +#ifndef __K3_DDR_INIT_H +#define __K3_DDR_INIT_H + +int dram_init(void); +int dram_init_banksize(void); + +#endif /* __K3_DDR_INIT_H */ diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c index 6221be9dcff8..4b5b9dded7b0 100644 --- a/board/ti/j721e/evm.c +++ b/board/ti/j721e/evm.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "../common/board_detect.h" #include "../common/fdt_ops.h" @@ -77,17 +78,6 @@ int board_init(void) return 0; } -int dram_init(void) -{ -#ifdef CONFIG_PHYS_64BIT - gd->ram_size = 0x100000000; -#else - gd->ram_size = 0x80000000; -#endif - - return 0; -} - phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { #ifdef CONFIG_PHYS_64BIT @@ -99,23 +89,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) return gd->ram_top; } -int dram_init_banksize(void) -{ - /* Bank 0 declares the memory available in the DDR low region */ - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = 0x80000000; - gd->ram_size = 0x80000000; - -#ifdef CONFIG_PHYS_64BIT - /* Bank 1 declares the memory available in the DDR high region */ - gd->bd->bi_dram[1].start = 0x880000000; - gd->bd->bi_dram[1].size = 0x80000000; - gd->ram_size = 0x100000000; -#endif - - return 0; -} - #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c index 9bcf67b7bfb8..b3eea3b73e60 100644 --- a/board/ti/j721s2/evm.c +++ b/board/ti/j721s2/evm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "../common/board_detect.h" #include "../common/fdt_ops.h" @@ -32,17 +33,6 @@ int board_init(void) return 0; } -int dram_init(void) -{ -#ifdef CONFIG_PHYS_64BIT - gd->ram_size = 0x100000000; -#else - gd->ram_size = 0x80000000; -#endif - - return 0; -} - phys_addr_t board_get_usable_ram_top(phys_size_t total_size) { #ifdef CONFIG_PHYS_64BIT @@ -54,22 +44,17 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) return gd->ram_top; } -int dram_init_banksize(void) +#if defined(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) { - /* Bank 0 declares the memory available in the DDR low region */ - gd->bd->bi_dram[0].start = 0x80000000; - gd->bd->bi_dram[0].size = 0x7fffffff; - gd->ram_size = 0x80000000; - -#ifdef CONFIG_PHYS_64BIT - /* Bank 1 declares the memory available in the DDR high region */ - gd->bd->bi_dram[1].start = 0x880000000; - gd->bd->bi_dram[1].size = 0x37fffffff; - gd->ram_size = 0x400000000; -#endif - - return 0; + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } +#endif #ifdef CONFIG_TI_I2C_BOARD_DETECT /* diff --git a/board/ti/j722s/evm.c b/board/ti/j722s/evm.c index 29e06a5442fe..f085ecfd37e9 100644 --- a/board/ti/j722s/evm.c +++ b/board/ti/j722s/evm.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../common/fdt_ops.h" int board_init(void) @@ -19,15 +20,17 @@ int board_init(void) return 0; } -int dram_init(void) +#if defined(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) { - return fdtdec_setup_mem_size_base(); -} - -int dram_init_banksize(void) -{ - return fdtdec_setup_memory_banksize(); + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } +#endif #if IS_ENABLED(CONFIG_BOARD_LATE_INIT) int board_late_init(void) diff --git a/board/ti/j784s4/evm.c b/board/ti/j784s4/evm.c index 548dbd5925df..d317f3eccbba 100644 --- a/board/ti/j784s4/evm.c +++ b/board/ti/j784s4/evm.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "../common/fdt_ops.h" DECLARE_GLOBAL_DATA_PTR; @@ -52,15 +53,17 @@ int board_init(void) return 0; } -int dram_init(void) +#if defined(CONFIG_XPL_BUILD) +void spl_perform_fixups(struct spl_image_info *spl_image) { - return fdtdec_setup_mem_size_base(); -} - -int dram_init_banksize(void) -{ - return fdtdec_setup_memory_banksize(); + if (IS_ENABLED(CONFIG_K3_DDRSS)) { + if (IS_ENABLED(CONFIG_K3_INLINE_ECC)) + fixup_ddr_driver_for_ecc(spl_image); + } else { + fixup_memory_node(spl_image); + } } +#endif #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) -- 2.34.1