From: George Chan Subject: [PATCH 0/3] u-boot chain-loading LineageOS bootimg Date: Sun, 27 Apr 2025 19:25:19 +0800 Message-Id: <20250427-android-boot-v1-0-bb6b37c9c9f1@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit X-B4-Tracking: v=1; b=H4sIAB8UDmgC/6tWKk4tykwtVrJSqFYqSi3LLM7MzwNyDHUUlJIzE vPSU3UzU4B8JSMDI1MDEyNz3cS8lKL8zBTdpPz8Et3U5KQkczOL5JREcyMloJaCotS0zAqwcdG xtbUACT5Sf14AAAA= To: Tom Rini , Mattijs Korpershoek , Simon Glass , Casey Connolly , Neil Armstrong , Sumit Garg Cc: u-boot@lists.denx.de, u-boot-qcom@groups.io, George Chan X-Mailer: b4 0.13.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1745753127; l=2260; i=gchan9527@gmail.com; s=20241015; h=from:subject:message-id; bh=TpB6jitJMIGVpdwdy7qxgOqOgCBFafe139KZgj6iPf4=; b=PKQFLxaHwapPNwtomlArsob6qBCMQHL6B86lp2XxK/EhHNCStBp4W4NCLvPWrZAV1CNYBV/F+ KfDauO/9OPvDzFBfoihz347uBkPcXmxXIjM6PQCOQ/xDE2XXcGoygmu X-Developer-Key: i=gchan9527@gmail.com; a=ed25519; pk=dscYWhT+BiQOBMpPE19NFQAjBBmcpipc6zdf2MTze/U= X-Endpoint-Received: by B4 Relay for gchan9527@gmail.com/20241015 with auth_id=248 List-Id: B4 Relay Submissions This is a series of patches to enable chainloading LineageOS on qcom SOC. First patch is to workaround kernel/ramdisk invalid addr by identify its physical memory address out-of-range. Since qcom SOC usually have 0x80000000 as start/base/real memory address but androidboot img specified to around 0x0. If other vendor bootloader behave similar then this patch can also workaround it as well. Second patch is enable bootmeth-android to have chance for extra mem block. Usually the fastboot mem block, to hold androidboot img, and loadaddr for unzipped kernel. If other SOC have extra mem block available but fastboot block, we can add extra logic to take care of it. Third patch is optional to enable snapdragon board to have extra cmdline found from original bootloader that is required for LineageOS boot init. An alternate method is to put the append string into a dummy device-tree file, as /chosen/bootarg ofnode porperty, that also contain msm-id. Then encapsulate as androidboot img and let u-boot as kernel binary. Below is an example for Xiaomi Miatoll device. /dts-v1/; / { qcom,msm-id = <443 0x0>; qcom,board-id = <0 0>, <0x10022 1>, <0x20022 1>, <0x30022 1>, <0x40022 1>, <0x50022 1>; #address-cells = <2>; #size-cells = <2>; memory { ddr_device_type = <0x07>; /* We expect the bootloader to fill in the size */ reg = <0 0 0 0>; }; chosen { bootargs = ""; }; }; Signed-off-by: George Chan --- George Chan (3): boot/image-android.c: Workaround androidboot kernel/ramdisk addr boot/bootmeth-android.c: Reuse fastboot memory block for unzip kernel mach-snapdragon: Add support to append string to kernel cmdline arch/arm/mach-snapdragon/Kconfig | 11 +++++ arch/arm/mach-snapdragon/board.c | 97 ++++++++++++++++++++++++++++++++++++++++ boot/bootmeth_android.c | 12 +++++ boot/image-android.c | 10 +++++ 4 files changed, 130 insertions(+) --- base-commit: 5a0a93a768487e55ebe50a34cc90d751bf99cc56 change-id: 20250427-android-boot-ecbb768cda72 Best regards, -- George Chan