From: Frank Li Date: Thu, 10 Jul 2025 15:13:48 -0400 Subject: [PATCH v21 2/9] PCI: imx6: Add LUT configuration for MSI/IOMMU in Endpoint mode MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Message-Id: <20250710-ep-msi-v21-2-57683fc7fb25@nxp.com> References: <20250710-ep-msi-v21-0-57683fc7fb25@nxp.com> In-Reply-To: <20250710-ep-msi-v21-0-57683fc7fb25@nxp.com> To: Kishon Vijay Abraham I , "Rafael J. Wysocki" , Thomas Gleixner , Anup Patel , Kishon Vijay Abraham I , Marc Zyngier , Greg Kroah-Hartman , "Rafael J. Wysocki" , Danilo Krummrich , Kishon Vijay Abraham I , Bjorn Helgaas , Arnd Bergmann , Shuah Khan , Richard Zhu , Lucas Stach , Lorenzo Pieralisi , Rob Herring , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Krzysztof Kozlowski , Conor Dooley , Manivannan Sadhasivam , =?utf-8?q?Krzysztof_Wilczy=C5=84ski?= Cc: Niklas Cassel , dlemoal@kernel.org, jdmason@kudzu.us, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org, linux-kselftest@vger.kernel.org, imx@lists.linux.dev, devicetree@vger.kernel.org, Niklas Cassel , Frank Li X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1752174836; l=1837; i=Frank.Li@nxp.com; s=20240130; h=from:subject:message-id; bh=undgD4r0xoItEmBKrD+Vrj1bBDbTL2OdUvPEHbj/82U=; b=l+XFGUURzdxzcmkKjct4/0IkcPsOSWsD8L8ONKwjhtN98Cagqt/z/sosYt8lYSneyYhenkY94 WoOhFqexlkKCMETvGGhnYSvxKxjeW2v/K+qewEnrGs6JSOBN/ZdF3FV X-Developer-Key: i=Frank.Li@nxp.com; a=ed25519; pk=I0L1sDUfPxpAkRvPKy7MdauTuSENRq+DnA+G4qcS94Q= X-Endpoint-Received: by B4 Relay for Frank.Li@nxp.com/20240130 with auth_id=121 List-Id: B4 Relay Submissions Add LUT entry for Endpoint mode by calling imx_pcie_add_lut_by_rid(0), since only one physical function is supported. This sets up a single LUT entry required for MSI or IOMMU. The Endpoint function can operate without LUT if neither IOMMU nor MSI is used. This LUT setup enables the EP doorbell feature by allowing the Root Complex to trigger the EP’s MSI controller. Signed-off-by: Frank Li --- change in v20 - update commit message change from v14 to v16 - none change from v13 to v14 - new patch --- drivers/pci/controller/dwc/pci-imx6.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 032b906c44dfaa374a32f511098402a494ef5677..3123bf49e209cc0fc448d6e02a472e280d538033 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1063,7 +1063,10 @@ static int imx_pcie_add_lut(struct imx_pcie *imx_pcie, u16 rid, u8 sid) data1 |= IMX95_PE0_LUT_VLD; regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1); - data2 = IMX95_PE0_LUT_MASK; /* Match all bits of RID */ + if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) + data2 = 0x7; /* EP side's RID from RC, only 'D' is meansful */ + else + data2 = IMX95_PE0_LUT_MASK; /* Match all bits of RID */ data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, rid); regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2); @@ -1767,6 +1770,9 @@ static int imx_pcie_probe(struct platform_device *pdev) ret = imx_add_pcie_ep(imx_pcie, pdev); if (ret < 0) return ret; + + /* Only support one physical function */ + imx_pcie_add_lut_by_rid(imx_pcie, 0); } else { pci->pp.use_atu_msg = true; ret = dw_pcie_host_init(&pci->pp); -- 2.34.1