Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id ADA4ECCD1AB for ; Sun, 19 Oct 2025 05:26:36 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id AE74D83768; Sun, 19 Oct 2025 07:26:30 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=reject dis=none) header.from=disroot.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; secure) header.d=disroot.org header.i=@disroot.org header.b="MLYLR8sH"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id EB84583631; Sun, 19 Oct 2025 07:26:28 +0200 (CEST) Received: from layka.disroot.org (layka.disroot.org [178.21.23.139]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 486F583837 for ; Sun, 19 Oct 2025 07:26:26 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=reject dis=none) header.from=disroot.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=ziyao@disroot.org Received: from mail01.disroot.lan (localhost [127.0.0.1]) by disroot.org (Postfix) with ESMTP id 1083F25D5F; Sun, 19 Oct 2025 07:26:26 +0200 (CEST) Received: from layka.disroot.org ([127.0.0.1]) by localhost (disroot.org [127.0.0.1]) (amavis, port 10024) with ESMTP id BzXV1UG9htQi; Sun, 19 Oct 2025 07:26:25 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=disroot.org; s=mail; t=1760851585; bh=6EQ3qTj08eEQ2vsee+iW+BHi/5jvB0Ub1kBEjVIZP1w=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=MLYLR8sH/U4vYRyA/+ZT3Dz0N2Uyr5iNaNGT1ZC1dXVvR6+5kam7ZnbasdxS9pR8V C7VMxrStZORCrDN8zeW+T98m3HSSFGVVsJJs2JY/gwmw7lmB2QBiKvAaPCvTepP7FO WFS96kdGXnBOS6M8JgzLtEHDUzg3aI5cXcFjI6fu01s0vWPQ1j5JW3IhThymMktlFd HwGablHIwGcPvpvSHR60IZiSFDHSE0/VsBInpwrmTq/ZH1kfX0DnuUw522p0V2VpKx eTSgz2wSi9YwHkWWgBcPMMO0MYJlB2jrIwKrv6MOHYT/P9FIRVPFFolXErbPDfOhyR lEkZodJkfHppw== From: Yao Zi To: Yao Zi , Simon Glass , Philipp Tomsich , Kever Yang , Tom Rini , Sumit Garg , Jonas Karlman , Heiko Stuebner Cc: u-boot@lists.denx.de Subject: [PATCH 1/2] arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2 Date: Sun, 19 Oct 2025 05:26:06 +0000 Message-ID: <20251019052607.61702-2-ziyao@disroot.org> In-Reply-To: <20251019052607.61702-1-ziyao@disroot.org> References: <20251019052607.61702-1-ziyao@disroot.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Jonas Karlman The NanoPi Zero2 is a small single board computer developed by FriendlyElec, based on the Rockchip RK3528A SoC. Add initial device tree for the FriendlyElec NanoPi Zero2 board. Signed-off-by: Jonas Karlman Tested-by: Yao Zi Link: https://lore.kernel.org/r/20250717103720.2853031-7-jonas@kwiboo.se Signed-off-by: Heiko Stuebner [ upstream commit: b944112abef4e52e81b19be44a7bac5b45779ba1 ] (cherry picked from commit 6b4efb438e72486e9410c75058ebd71855565e22) --- .../arm64/rockchip/rk3528-nanopi-zero2.dts | 340 ++++++++++++++++++ 1 file changed, 340 insertions(+) create mode 100644 dts/upstream/src/arm64/rockchip/rk3528-nanopi-zero2.dts diff --git a/dts/upstream/src/arm64/rockchip/rk3528-nanopi-zero2.dts b/dts/upstream/src/arm64/rockchip/rk3528-nanopi-zero2.dts new file mode 100644 index 00000000000..9f683033c5f --- /dev/null +++ b/dts/upstream/src/arm64/rockchip/rk3528-nanopi-zero2.dts @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include +#include "rk3528.dtsi" + +/ { + model = "FriendlyElec NanoPi Zero2"; + compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528"; + + aliases { + ethernet0 = &gmac1; + i2c1 = &i2c1; + mmc0 = &sdhci; + mmc1 = &sdmmc; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + adc-keys-0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-maskrom { + label = "MASK"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + + adc-keys-1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "RECOVERY"; + linux,code = ; + press-threshold-microvolt = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led1>, <&led_sys>; + + led-0 { + color = ; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + color = ; + default-state = "on"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + vcc0v6_ddr: regulator-0v6-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc0v6_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_0v9: regulator-0v9-vdd { + compatible = "regulator-fixed"; + regulator-name = "vdd_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_ddr: regulator-1v1-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v8: regulator-1v8-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-3v3-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sd: regulator-3v3-vcc-sd { + compatible = "regulator-fixed"; + gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren_l>; + regulator-name = "vcc3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; + + vcc5v0_sys: regulator-5v0-vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + usb2_host_5v: regulator-5v0-usb2-host { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host1_pwren>; + regulator-name = "usb2_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vccio_sd: regulator-vccio-sd { + compatible = "regulator-gpio"; + gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_vol_ctrl_h>; + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <1800000 0x0>, <3300000 0x1>; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_arm: regulator-vdd-arm { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <746000>; + regulator-max-microvolt = <1201000>; + regulator-settling-time-up-us = <250>; + }; + + vdd_logic: regulator-vdd-logic { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>; + pwm-supply = <&vcc5v0_sys>; + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <705000>; + regulator-max-microvolt = <1006000>; + regulator-settling-time-up-us = <250>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&gmac1 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>, + <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1m0_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + interrupt-parent = <&gpio4>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; + wakeup-source; + }; +}; + +&mdio1 { + rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1_rstn_l>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + ethernet { + gmac1_rstn_l: gmac1-rstn-l { + rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led1: led1 { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_sys: led-sys { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rtc { + rtc_int_l: rtc-int-l { + rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h { + rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sdmmc_pwren_l: sdmmc-pwren-l { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb20_host1_pwren: usb20-host1-pwren { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1m0_pins>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2m0_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; -- 2.50.1