Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E062BD2502A for ; Sun, 11 Jan 2026 00:03:02 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 9FC9083AA4; Sun, 11 Jan 2026 01:03:00 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=amarulasolutions.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=amarulasolutions.com header.i=@amarulasolutions.com header.b="bHY827VJ"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 8AF0383AAB; Sun, 11 Jan 2026 01:02:59 +0100 (CET) Received: from mail-ej1-x62c.google.com (mail-ej1-x62c.google.com [IPv6:2a00:1450:4864:20::62c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4C25783A9F for ; Sun, 11 Jan 2026 01:02:57 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=amarulasolutions.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=michael@amarulasolutions.com Received: by mail-ej1-x62c.google.com with SMTP id a640c23a62f3a-b8052725de4so748804866b.0 for ; Sat, 10 Jan 2026 16:02:57 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=amarulasolutions.com; s=google; t=1768089777; x=1768694577; darn=lists.denx.de; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=ALPdHb6l+fCEXl0BiIzFM6fj0JQhr2src3cYmSvmzL0=; b=bHY827VJhz7ol39iOhxoHQHUPVP19ZbzXVG4oG/ISAlxxZJAyxkqY9ZFI7fdYm1TyV qmxF0SlsuNV0/sJELgyVKxw4ahYAa0MegezmITZvEBm/PMJV/tLhV3ggaTcm8K7Gq/9Z U3b2Tv3rKjA9w4uTUvCAJqUQuNnpcb+NemuhA= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1768089777; x=1768694577; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=ALPdHb6l+fCEXl0BiIzFM6fj0JQhr2src3cYmSvmzL0=; b=HPM2UwlFW594s4ZJJNnHrpZia9keI8MmmOgBr29PnL2sBCc6O/iXIMcRCJ+6SpkDDB b50UIe7tQdEHHyVcs0fv/fH3kLyNllUcVF3/3VaLm3MN7/nuJREqOOlhUshQazcrKD6a CHBRfDIVDRijPpfhibfN0AZb25DLR3r4EQGzo0pG0hmojyaUbD+UgOBeaoE1CuaoSoo+ AFVnF5vnkQa8e4YN/sCvi2svnMTLScCbSHhEa67SFBVW3JHsT9EEKsjnCLLVxLw16wx4 m6RKCZYdimDGuDOpDLyuDUNwwdIBfmemKw+mSbFWkE/dBNCelT3qoVKepcPJQcD4Y8zX Qcrw== X-Forwarded-Encrypted: i=1; AJvYcCXdmVykfFYewoPvNaHESoF6Gis6HDnk/q51Q/yGCohc+oW2rdHzCEInqEEl1WBPOkJ1+5kyagI=@lists.denx.de X-Gm-Message-State: AOJu0Yy6oVEMd7VS2aZhbAlvIMSom4OXU/fA+mv0lHPtUJfOEPSZ1+pA HiqfWx75Llr2hnMQd/6axLjfxsrSjqSQknbIHlBHyaFCDxx1M71cxOlpcWD58avMyPM= X-Gm-Gg: AY/fxX5qmA3stsMZZjrAbCISK8YMEzbSk57b514fa7E1vEC9ME23NeP/jAn6VL/8bkH tqYWIVGWzgj6LMvJPUld6lb0O64s3SEy9ITjy4b2gO1K3e3z2gngNAwefC/LJxj7aZHhnCLOsW6 RSB50REAqA4c1SmUnoazZvhMaYp4hafIiWiafddFNcYBF7uU0YfVqgemQJNozjClZFxeYEhMU1F 9zjxl0ekIKnykYOtK87kH5h+OJCTYTi8f+33pYkuY23PAS/RRKv7RDAKsyupejJw6tk1hu2/Q5S j0fNQ0hXqOMxGsOvk/40kUdgTBJdgyRSWLuVPISXslgULE5Uuphmvhce/VIYIUncnOpQi2/NUg6 6zpWn9mssxAOLcDndqR/NfYBsh9GoGFYkjYgrdXrD0yUJpVhEX75IfF50pNSVtGwzmrIWH2kAgr sV5eVKXJJcLvIvAf49zKcPw1LmhW3SkM7nGNzlswzq8Wc4fMm8hLSCVSSgpGzY8UTO66TxuMSMu qHmt+pienLCifytCivrEbmxyFJubJlryaUbrMuNG+vYe/mWAt38jXk5QA== X-Google-Smtp-Source: AGHT+IF1emTSgdjSugDDHGD9LXOHcKxNJ7/zZ0vA6VVAlLGXy7+WvBVj3nYUAAQaQ6k3P/SSeic+Pg== X-Received: by 2002:a17:907:1c1a:b0:b87:fad:4423 with SMTP id a640c23a62f3a-b870fad498fmr17870866b.10.1768089776451; Sat, 10 Jan 2026 16:02:56 -0800 (PST) Received: from panicking.homenet.telecomitalia.it (host-87-5-117-220.retail.telecomitalia.it. [87.5.117.220]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-b842a23433asm1519246566b.3.2026.01.10.16.02.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 10 Jan 2026 16:02:55 -0800 (PST) From: Michael Trimarchi To: Peng Fan , Jaehoon Chung Cc: Tom Rini , Dario Binacchi , u-boot@lists.denx.de, linux-amarula@amarulasolutions.com, Michael Trimarchi Subject: [RFC PATCH] power: regulator: pfuze100: support high voltage range bit Date: Sun, 11 Jan 2026 01:02:51 +0100 Message-ID: <20260111000251.1278257-1-michael@amarulasolutions.com> X-Mailer: git-send-email 2.51.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean The PFUZE100/200/3000 family of PMICs allow switching regulators (specifically SW2, SW3A/B, SW4 on PFUZE100/200 and SW2 on PFUZE3000) to operate in a "high" voltage range mode. This mode is indicated by a specific bit in the voltage selection register (bit 3 for PFUZE3000, bit 6 for others). When this bit is set: - PFUZE100/200 switches from a 25mV step to a 50mV step, with a different minimum voltage (800mV). - PFUZE3000 SW2 switches to a completely different non-linear voltage table. Currently, the driver uses static descriptors that assume the low/default range. This results in incorrect voltage readings and settings if the PMIC is configured for the high range. This patch updates the driver to: 1. Identify regulators with high-bit support via a new `hi_bit` flag. 2. Read the register during probe to detect the current range configuration. 3. Dynamically update the regulator descriptor (step, mask, min_uV, or table) to match the active range. This aligns the U-Boot driver behavior with the Linux kernel implementation. Signed-off-by: Michael Trimarchi --- Note I need to retest it on the board but it's just a propose change --- drivers/power/regulator/pfuze100.c | 66 ++++++++++++++++++++++-------- 1 file changed, 48 insertions(+), 18 deletions(-) diff --git a/drivers/power/regulator/pfuze100.c b/drivers/power/regulator/pfuze100.c index f864b1d8834..63d39c21bb8 100644 --- a/drivers/power/regulator/pfuze100.c +++ b/drivers/power/regulator/pfuze100.c @@ -18,6 +18,7 @@ * * @name: Identify name for the regulator. * @type: Indicates the regulator type. + * @hi_bit: Indicate if support hi voltage range. * @uV_step: Voltage increase for each selector. * @vsel_reg: Register for adjust regulator voltage for normal. * @vsel_mask: Mask bit for setting regulator voltage for normal. @@ -29,6 +30,7 @@ struct pfuze100_regulator_desc { char *name; enum regulator_type type; + bool hi_bit; unsigned int uV_step; unsigned int vsel_reg; unsigned int vsel_mask; @@ -54,10 +56,11 @@ struct pfuze100_regulator_plat { .voltage = (vol), \ } -#define PFUZE100_SW_REG(_name, base, step) \ +#define PFUZE100_SW_REG(_name, base, step, hbit) \ { \ .name = #_name, \ .type = REGULATOR_TYPE_BUCK, \ + .hi_bit = (hbit), \ .uV_step = (step), \ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ .vsel_mask = 0x3F, \ @@ -65,10 +68,11 @@ struct pfuze100_regulator_plat { .stby_mask = 0x3F, \ } -#define PFUZE100_SWB_REG(_name, base, mask, step, voltages) \ +#define PFUZE100_SWB_REG(_name, base, mask, step, voltages, hbit) \ { \ .name = #_name, \ .type = REGULATOR_TYPE_BUCK, \ + .hi_bit = (hbit), \ .uV_step = (step), \ .vsel_reg = (base), \ .vsel_mask = (mask), \ @@ -155,15 +159,19 @@ static unsigned int pfuze3000_sw2lo[] = { 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000 }; +static unsigned int pfuze3000_sw2hi[] = { + 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, +}; + /* PFUZE100 */ static struct pfuze100_regulator_desc pfuze100_regulators[] = { - PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), - PFUZE100_SW_REG(sw1c, PFUZE100_SW1CVOL, 25000), - PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), - PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), - PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), - PFUZE100_SW_REG(sw4, PFUZE100_SW4VOL, 25000), - PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), + PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000, false), + PFUZE100_SW_REG(sw1c, PFUZE100_SW1CVOL, 25000, false), + PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000, true), + PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000, true), + PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000, true), + PFUZE100_SW_REG(sw4, PFUZE100_SW4VOL, 25000, true), + PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst, false), PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), @@ -176,11 +184,11 @@ static struct pfuze100_regulator_desc pfuze100_regulators[] = { /* PFUZE200 */ static struct pfuze100_regulator_desc pfuze200_regulators[] = { - PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000), - PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000), - PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000), - PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000), - PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), + PFUZE100_SW_REG(sw1ab, PFUZE100_SW1ABVOL, 25000, false), + PFUZE100_SW_REG(sw2, PFUZE100_SW2VOL, 25000, true), + PFUZE100_SW_REG(sw3a, PFUZE100_SW3AVOL, 25000, true), + PFUZE100_SW_REG(sw3b, PFUZE100_SW3BVOL, 25000, true), + PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst, false), PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), PFUZE100_VGEN_REG(vgen1, PFUZE100_VGEN1VOL, 50000), @@ -195,9 +203,9 @@ static struct pfuze100_regulator_desc pfuze200_regulators[] = { static struct pfuze100_regulator_desc pfuze3000_regulators[] = { PFUZE3000_SW1_REG(sw1a, PFUZE100_SW1ABVOL, 25000), PFUZE3000_SW1_REG(sw1b, PFUZE100_SW1CVOL, 25000), - PFUZE100_SWB_REG(sw2, PFUZE100_SW2VOL, 0x7, 50000, pfuze3000_sw2lo), + PFUZE100_SWB_REG(sw2, PFUZE100_SW2VOL, 0x7, 50000, pfuze3000_sw2lo, true), PFUZE3000_SW3_REG(sw3, PFUZE100_SW3AVOL, 50000), - PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst), + PFUZE100_SWB_REG(swbst, PFUZE100_SWBSTCON1, 0x3, 50000, pfuze100_swbst, false), PFUZE100_SNVS_REG(vsnvs, PFUZE100_VSNVSVOL, 0x7, pfuze3000_vsnvs), PFUZE100_FIXED_REG(vrefddr, PFUZE100_VREFDDRCON, 750000), PFUZE100_VGEN_REG(vldo1, PFUZE100_VGEN1VOL, 100000), @@ -246,9 +254,10 @@ static int pfuze100_regulator_probe(struct udevice *dev) struct dm_regulator_uclass_plat *uc_pdata; struct pfuze100_regulator_plat *plat = dev_get_plat(dev); struct pfuze100_regulator_desc *desc; - int i, size; + int i, size, val, sw_hi = 0x40; + int version = dev_get_driver_data(dev_get_parent(dev)); - switch (dev_get_driver_data(dev_get_parent(dev))) { + switch (version) { case PFUZE100: desc = pfuze100_regulators; size = ARRAY_SIZE(pfuze100_regulators); @@ -260,6 +269,7 @@ static int pfuze100_regulator_probe(struct udevice *dev) case PFUZE3000: desc = pfuze3000_regulators; size = ARRAY_SIZE(pfuze3000_regulators); + sw_hi = 1 << 3; break; default: debug("Unsupported PFUZE\n"); @@ -281,6 +291,26 @@ static int pfuze100_regulator_probe(struct udevice *dev) uc_pdata = dev_get_uclass_plat(dev); uc_pdata->type = desc[i].type; + + /* SW2~SW4 high bit check and modify the voltage value table */ + if (desc[i].hi_bit) { + val = pmic_reg_read(dev->parent, desc[i].vsel_reg); + if (val < 0) { + printf("Fails to read from the register.\n"); + return -EIO; + } + + if (val & sw_hi) { + if (version == PFUZE3000) { + desc[i].volt_table = pfuze3000_sw2hi; + } else { + desc[i].uV_step = 50000; + desc[i].vsel_mask = 0x7; + uc_pdata->min_uV = 800000; + } + } + } + if (uc_pdata->type == REGULATOR_TYPE_BUCK) { if (!strcmp(dev->name, "swbst")) { uc_pdata->mode = pfuze_swbst_modes; -- 2.51.0