Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 56004E85389 for ; Fri, 3 Apr 2026 20:12:00 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id AF7A184020; Fri, 3 Apr 2026 22:11:58 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="YycbnwfI"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 29B28840AB; Fri, 3 Apr 2026 18:01:37 +0200 (CEST) Received: from mail-wm1-x329.google.com (mail-wm1-x329.google.com [IPv6:2a00:1450:4864:20::329]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 39A1B83CF5 for ; Fri, 3 Apr 2026 18:01:33 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=lobanokivan11@gmail.com Received: by mail-wm1-x329.google.com with SMTP id 5b1f17b1804b1-488a041eae5so2967055e9.1 for ; Fri, 03 Apr 2026 09:01:33 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1775232092; x=1775836892; darn=lists.denx.de; h=content-transfer-encoding:signed-off-by:mime-version:message-id :date:subject:cc:to:from:from:to:cc:subject:date:message-id:reply-to; bh=NOXgV/k4knn0d3n5hWmjPXJ6lr6HZn/LfNf76oR3C6I=; b=YycbnwfIVic70wx9mKYLVl08ODZWxgmd0gSuvlMXhjaBh+ROSWNC5YX8tb5h9TjkLv 1P9QbycFZO54R+RHa0lDO2BQd+nejv5pRICXOnqmkG1mSSM+WEXGlchvYE2mCwNsP/q9 PIej7pboBmH9BPvI0DgZREEIG2bEp4+EQvHkjHiw5yU5NWZE12MaRykzs+Vma4hACSl8 ue72VT8TQeHv7LsUnvgMX5R6Hft1X+Ehyt+25kOL+GQ50lXMZ07q3KVU2eH1GRke/DO6 ZoMaZ5ydTDJRmb9tyy1pnDvW0OT+5Nh6NgNHBNkGpmbNOoGV7SCKKGMTtAEOTBHduAdY Y14A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1775232092; x=1775836892; h=content-transfer-encoding:signed-off-by:mime-version:message-id :date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=NOXgV/k4knn0d3n5hWmjPXJ6lr6HZn/LfNf76oR3C6I=; b=CdJMMq1ddKWv8vfNiSQedN0Bdo3y3Yg/Z+W1izf+xRaKZ5lGHQzGYjWzCcEybK7vfU QBkiGBeTLJ+gJhHkDsX/GhK69rCfiIxZVUTaKIxa+DZEoScTDgeNNtiZn33ddXELOrgY mAPODg7d8bsNwLgMtPDHUnbd95X1K7UFKsJe1/6RnTtifSQF5h/hUxJKIFwS/UWnY6dN ngxX2IFinpmJRuOkGBUMcS5pox6qfgG1XFl4Na8m23npOQCYRZDn7SFE8zryStwi29Ca VK1PsGyL2ZuqpCeSPY2oOkoVU0Nj/48qfcr3JQZQUjtHxp0Hnx8K0oI0ifGm6AEXGBcf zyhA== X-Gm-Message-State: AOJu0YwTCxQoTiRSNFPZS6/9fzbXjN6hCTXTkqDxlSXhDZCApiaAINA/ 7iaN3maaUeD0eLrsd/Yjmy0IIvQ8C9oUEqlAOgueXq0BUoVXUGt/M11zqrR9mvQQ5VSIizwU X-Gm-Gg: ATEYQzzQxqvp+Oi5xopOmF/RawpoCG5gH7kcTYJqJb8B/wD7vpRKDBqXK0aL9yq4/gp rW1KAASzzTqSe7nwLZTgwpXm03U+44kY96i9+HmUEbm4ncBeC9upDZvRUy0BB/vGGE68ENFAIr3 StsNIasZdiAGw1wLN62skNraGMI/Heu6v2krfwViBMKsS8oSIzb+iJ8bYAa8fIcwU44a1A4FHO9 nxcp9+lVvr4jZQYIDLUwUZin+o+a9aU6eSIw0eY96quWYYY0/q/EF17ecj/fPDVif0DEmGkX3iX T3q0BxgqO/7gB/pZov2+0nzXRuYgqiOUbSx+4+UHg7VD64KdOtZYV3+hotW2jrbIG1Z+LWQcyW+ FkZcIh3vmOmiAkPjoP0mSX8t3isHutc1MyNCwVgKjRs+0CRkIsTb0kBRt1f4jVwMs082dX6qzcW F8yfZpiiv+aCIht9fNuKrrvxhvvz7s4cOtfCCa2mFYGhSoQsYMHwtFPniPSE5/7iJLZmHZ1on/t 75mHRSfrUKg X-Received: by 2002:a05:600c:3e87:b0:486:f8d6:5dea with SMTP id 5b1f17b1804b1-488997c273dmr61530595e9.19.1775232091177; Fri, 03 Apr 2026 09:01:31 -0700 (PDT) Received: from nixos (mm-138-12-215-37.mfilial.dynamic.pppoe.byfly.by. [37.215.12.138]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4887e967badsm365081515e9.14.2026.04.03.09.01.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 03 Apr 2026 09:01:30 -0700 (PDT) From: Lobanokivan11 To: u-boot@lists.denx.de Cc: u-boot-qcom@groups.io, casey.connolly@linaro.org, neil.armstrong@linaro.org, sumit.garg@kernel.org, trini@konsulko.com, Lobanokivan11 Subject: [PATCH] xiaomi pad 5 support Date: Fri, 3 Apr 2026 19:01:26 +0300 Message-ID: <20260403160127.10605-1-lobanokivan11@gmail.com> X-Mailer: git-send-email 2.53.0 MIME-Version: 1.0 Signed-off-by: Lobanokivan11 Content-Transfer-Encoding: 8bit X-Mailman-Approved-At: Fri, 03 Apr 2026 22:11:58 +0200 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean --- board/qualcomm/xiaomi-nabu.env | 11 + configs/xiaomi-nabu_defconfig | 6 + dts/upstream/src/arm64/qcom/pm8150.dtsi | 10 +- dts/upstream/src/arm64/qcom/pm8150b.dtsi | 8 + .../src/arm64/qcom/sm8150-oneplus-common.dtsi | 545 ++++++++ .../arm64/qcom/sm8150-oneplus-guacamole.dts | 70 + .../src/arm64/qcom/sm8150-oneplus-hotdogb.dts | 65 + .../src/arm64/qcom/sm8150-wcd9340.dtsi | 86 ++ .../src/arm64/qcom/sm8150-xiaomi-cepheus.dts | 575 ++++++++ .../src/arm64/qcom/sm8150-xiaomi-nabu.dts | 1175 +++++++++++++++++ dts/upstream/src/arm64/qcom/sm8150.dtsi | 102 ++ 11 files changed, 2652 insertions(+), 1 deletion(-) create mode 100644 board/qualcomm/xiaomi-nabu.env create mode 100644 configs/xiaomi-nabu_defconfig create mode 100644 dts/upstream/src/arm64/qcom/sm8150-oneplus-common.dtsi create mode 100644 dts/upstream/src/arm64/qcom/sm8150-oneplus-guacamole.dts create mode 100644 dts/upstream/src/arm64/qcom/sm8150-oneplus-hotdogb.dts create mode 100644 dts/upstream/src/arm64/qcom/sm8150-wcd9340.dtsi create mode 100644 dts/upstream/src/arm64/qcom/sm8150-xiaomi-cepheus.dts create mode 100644 dts/upstream/src/arm64/qcom/sm8150-xiaomi-nabu.dts diff --git a/board/qualcomm/xiaomi-nabu.env b/board/qualcomm/xiaomi-nabu.env new file mode 100644 index 00000000000..ffa49ea9885 --- /dev/null +++ b/board/qualcomm/xiaomi-nabu.env @@ -0,0 +1,11 @@ +stdin=serial,button-kbd +stdout=serial,vidconsole +stderr=serial,vidconsole +preboot=scsi scan; bootefi bootmgr +fastboot=fastboot -l $fastboot_addr_r usb 0 +do_boot=bootefi bootmgr +bootmenu_0=Boot first available device=run do_boot +bootmenu_1=Enable fastboot mode=run fastboot +bootmenu_2=Reset device=reset +menucmd=bootmenu +bootcmd=run do_boot diff --git a/configs/xiaomi-nabu_defconfig b/configs/xiaomi-nabu_defconfig new file mode 100644 index 00000000000..9554b6b88e8 --- /dev/null +++ b/configs/xiaomi-nabu_defconfig @@ -0,0 +1,6 @@ +# Configuration for building U-Boot for Xiaomi Pad 5 + +#include "qcom_defconfig" + +CONFIG_DEFAULT_DEVICE_TREE="qcom/sm8150-xiaomi-nabu" +CONFIG_DEFAULT_ENV_FILE="board/qualcomm/xiaomi-nabu.env" diff --git a/dts/upstream/src/arm64/qcom/pm8150.dtsi b/dts/upstream/src/arm64/qcom/pm8150.dtsi index d2568686a09..c3411b308e3 100644 --- a/dts/upstream/src/arm64/qcom/pm8150.dtsi +++ b/dts/upstream/src/arm64/qcom/pm8150.dtsi @@ -116,13 +116,21 @@ status = "disabled"; }; - rtc@6000 { + pm8150_rtc: rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; }; + pm8150_sdam_2: sdam@b100 { + compatible = "qcom,spmi-sdam"; + reg = <0xb100>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + pm8150_gpios: gpio@c000 { compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/dts/upstream/src/arm64/qcom/pm8150b.dtsi b/dts/upstream/src/arm64/qcom/pm8150b.dtsi index 3f7b0b6a1d1..97361a586be 100644 --- a/dts/upstream/src/arm64/qcom/pm8150b.dtsi +++ b/dts/upstream/src/arm64/qcom/pm8150b.dtsi @@ -150,6 +150,14 @@ status = "disabled"; }; + pm8150b_fg: fuel-gauge@4000 { + compatible = "qcom,pm8150b-fg"; + reg = <0x4000>; + interrupts = <0x2 0x40 0x3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "soc-delta"; + status = "disabled"; + }; + pm8150b_gpios: gpio@c000 { compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; diff --git a/dts/upstream/src/arm64/qcom/sm8150-oneplus-common.dtsi b/dts/upstream/src/arm64/qcom/sm8150-oneplus-common.dtsi new file mode 100644 index 00000000000..e9118defdd3 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-oneplus-common.dtsi @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Caleb Connolly + */ + +/dts-v1/; + +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + compatible = "qcom,sm8150-mtp", "qcom,sm8150"; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + /* The rmtfs_mem needs to be guarded due to "XPU limitations" + * it is otherwise possible for an allocation adjacent to the + * rmtfs_mem region to trigger an XPU violation, causing a crash. + */ + // rmtfs_lower_guard: memory@f2900000 { + // no-map; + // reg = <0 0xf2900000 0 0x1000>; + // }; + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: memory@f2901000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf2901000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + // rmtfs_upper: memory@f2902000 { + // no-map; + // reg = <0 0xf2902000 0 0x1000>; + // }; + }; +}; + +&adsp_mem { + reg = <0x0 0x8be00000 0x0 0x1e00000>; +}; + +&mpss_mem { + reg = <0x0 0x8dc00000 0x0 0x9600000>; +}; + +&venus_mem { + reg = <0x0 0x97200000 0x0 0x500000>; +}; + +&slpi_mem { + reg = <0x0 0x97700000 0x0 0x1400000>; +}; + +&ipa_fw_mem { + reg = <0x0 0x98b00000 0x0 0x10000>; +}; + +&ipa_gsi_mem { + reg = <0x0 0x98b10000 0x0 0x5000>; +}; + +&gpu_mem { + reg = <0x0 0x98b15000 0x0 0x2000>; +}; + +&spss_mem { + reg = <0x0 0x98c00000 0x0 0x100000>; +}; + +&cdsp_mem { + reg = <0x0 0x98d00000 0x0 0x1400000>; +}; + +// Just like the OnePlus 6, the OnePlus 7 puts this in a weird spot +// Again it's left up to the driver to allocate this, it always allocates +// it here. +&rmtfs_mem { + reg = <0x0 0xf2901000 0x0 0x200000>; +}; + +&gpu { + status = "disabled"; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = ; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&remoteproc_adsp { + status = "disabled"; +}; + +&remoteproc_cdsp { + status = "disabled"; +}; + +&remoteproc_slpi { + status = "disabled"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/oneplus7/modem.mdt"; +}; + +// Some of these might be guacamole specific +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; + + tp_irq_active: tp-irq-active { + mux { + pins = "gpio122"; + function = "gpio"; + }; + + config { + pins = "gpio122"; + drive-strength = <0x08>; + bias-disable; + input-enable; + }; + }; + + tp_rst_active: tp-rst-active { + mux { + pins = "gpio54"; + function = "gpio"; + }; + + config { + pins = "gpio54"; + drive-strength = <0x08>; + bias-disable; + }; + }; + + tp_1v8_active: tp-1v8-active { + mux { + pins = "gpio119"; + function = "gpio"; + }; + + config { + pins = "gpio119"; + drive-strength = <0x08>; + bias-pull-up; + }; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&wifi { + status = "okay"; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150-oneplus-guacamole.dts b/dts/upstream/src/arm64/qcom/sm8150-oneplus-guacamole.dts new file mode 100644 index 00000000000..bf4b540d36a --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-oneplus-guacamole.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Devicetree for the OnePlus 7 Pro. This device uses a samsung touch driver + * and has a 1440p panel but is otherwise similar to the rest of the series. + * + * Copyright (c) 2021, Caleb Connolly + */ + +/dts-v1/; + +#include +#include +#include "sm8150-oneplus-common.dtsi" + +/ { + model = "OnePlus 7 Pro"; + compatible = "oneplus,guacamole", "oneplus,oneplus7", "qcom,sm8150"; + + aliases { + display0 = &framebuffer0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + stdout-path = "display0"; + + /* + * hack: Use framebuffer setup by the bootloader for simplefb. + * the address is taken from the bootloader config (strings xbl.img | grep "Display Reserved") + */ + framebuffer0: framebuffer@9C000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9C000000 0 (1440 * 3120 * 4)>; + width = <1440>; + height = <3120>; + stride = <(1440 * 4)>; + format = "a8r8g8b8"; + status = "okay"; + + }; + }; + + reserved-memory { + // hack: Bootloader framebuffer memory region + fb_mem: memory@a1a10000 { + compatible = "removed-dma-pool"; + no-map; + reg = <0 0x9C000000 0 (1440 * 3120 * 4)>; + }; + }; +}; + +&i2c17 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@48 { + compatible = "samsung,s6sy761"; + status = "okay"; + reg = <0x48>; + interrupt-parent = <&tlmm>; + interrupts = <122 0x2008>; + vdd-supply = <&vreg_l17a_3p0>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_irq_active &tp_rst_active &tp_1v8_active>; + }; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150-oneplus-hotdogb.dts b/dts/upstream/src/arm64/qcom/sm8150-oneplus-hotdogb.dts new file mode 100644 index 00000000000..7ba966a838c --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-oneplus-hotdogb.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include "sm8150-oneplus-common.dtsi" + +/ { + model = "OnePlus 7T"; + compatible = "oneplus,hotdobg", "oneplus,oneplus7", "qcom,sm8150"; + + aliases { + display0 = &framebuffer0; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + stdout-path = "display0"; + + /* + * hack: Use framebuffer setup by the bootloader for simplefb. + * the address is taken from the bootloader config (strings xbl.img | grep "Display Reserved") + */ + framebuffer0: framebuffer@9C000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9C000000 0 (1080 * 2400 * 4)>; + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + status = "okay"; + + }; + }; + + reserved-memory { + // hack: Bootloader framebuffer memory region + fb_mem: memory@a1a10000 { + compatible = "removed-dma-pool"; + no-map; + reg = <0 0x9C000000 0 (1080 * 2400 * 4)>; + }; + + removed_region: removed-region@89d00000 { + reg = <0x0 0x89d00000 0x0 0x1a00000>; + no-map; + }; + ramoops: ramoops@0xA9800000 { + compatible = "ramoops"; + reg = <0 0xA9800000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + devinfo-size = <0x1000>; + ecc-size = <0x0>; + }; + }; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150-wcd9340.dtsi b/dts/upstream/src/arm64/qcom/sm8150-wcd9340.dtsi new file mode 100644 index 00000000000..cde7e55bf84 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-wcd9340.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SM8150 SoC device tree source + * + * Copyright (c) 2023, The Linux Foundation. All rights reserved. + */ + +&slim { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + wcd9340_ifd: ifd@0,0 { + compatible = "slim217,250"; + reg = <0 0>; + }; + + wcd9340: codec@1,0 { + compatible = "slim217,250"; + reg = <1 0>; + slim-ifc-dev = <&wcd9340_ifd>; + + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clock-names = "extclk"; + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + + #clock-cells = <0>; + clock-frequency = <9600000>; + clock-output-names = "mclk"; + + pinctrl-0 = <&wcd_intr_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + #address-cells = <1>; + #size-cells = <1>; + + wcdgpio: gpio-controller@42 { + compatible = "qcom,wcd9340-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x42 0x2>; + }; + + swm: swm@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x40>; + interrupts-extended = <&wcd9340 20>; + + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>; + + #sound-dai-cells = <1>; + clocks = <&wcd9340>; + clock-names = "iface"; + #address-cells = <2>; + #size-cells = <0>; + }; + }; + }; +}; + +&tlmm { + wcd_intr_default: wcd-intr-default-state { + pins = "gpio123"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150-xiaomi-cepheus.dts b/dts/upstream/src/arm64/qcom/sm8150-xiaomi-cepheus.dts new file mode 100644 index 00000000000..422119fbd05 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-xiaomi-cepheus.dts @@ -0,0 +1,575 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Alexey Minnekhanov + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/* + * Rewrite reserved memory maps inherited from sm8150.dtsi to match the ones + * used on xiaomi-cepheus. + * Note: this list is ordered by its memory address in sm8150.dtsi. + */ +/delete-node/ &tz_mem; /* same address but larger, no place for rmtfs_mem! */ +/delete-node/ &rmtfs_mem; /* moved to completely different address */ +/delete-node/ &adsp_mem; /* same start address, but larger size */ +/delete-node/ &mpss_mem; /* same size, shifted higher, due to larger adsp_mem */ +/delete-node/ &venus_mem; /* same size, shifted higher */ +/delete-node/ &slpi_mem; /* same size, shifted higher */ +/delete-node/ &ipa_fw_mem; /* same size, shifted higher */ +/delete-node/ &ipa_gsi_mem; /* same size, shifted higher */ +/delete-node/ &gpu_mem; /* same size, shifted higher */ +/delete-node/ &spss_mem; /* same size, shifted higher */ +/delete-node/ &cdsp_mem; /* same size, shifted higher */ + +/ { + model = "Xiaomi Mi 9"; + compatible = "xiaomi,cepheus", "qcom,sm8150"; + + aliases { + serial0 = &uart2; + display0 = &framebuffer; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + width = <1080>; + height = <2340>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet (& no dispcc either).. + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&ai_key_pin_a &vol_up_pin_a>; + + vol_up { + label = "volume_up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + ai_key { + label = "ai_key"; + gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; /* no AI key in Linux */ + wakeup-source; + debounce-interval = <39>; + }; + }; + + reserved-memory { + tz_mem: memory@86200000 { + no-map; + reg = <0x0 0x86200000 0x0 0x5500000>; + phandle = <0x594>; + }; + + adsp_mem: memory@8be00000 { + no-map; + reg = <0x0 0x8be00000 0x0 0x2200000>; + }; + + mpss_mem: memory@8e000000 { + no-map; + reg = <0x0 0x8e000000 0x0 0x9600000>; + }; + + venus_mem: memory@97600000 { + no-map; + reg = <0x0 0x97600000 0x0 0x500000>; + }; + + slpi_mem: memory@97b00000 { + no-map; + reg = <0x0 0x97b00000 0x0 0x1400000>; + }; + + ipa_fw_mem: memory@98f00000 { + no-map; + reg = <0x0 0x98f00000 0x0 0x10000>; + }; + + ipa_gsi_mem: memory@98f10000 { + no-map; + reg = <0x0 0x98f10000 0x0 0x5000>; + }; + + gpu_mem: memory@98f15000 { + no-map; + reg = <0x0 0x98f15000 0x0 0x2000>; + }; + + spss_mem: memory@99000000 { + no-map; + reg = <0x0 0x99000000 0x0 0x100000>; + }; + + cdsp_mem: memory@99100000 { + no-map; + reg = <0x0 0x99100000 0x0 0x1400000>; + }; + + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2400000>; + no-map; + }; + + cdsp_sec_mem: memory@a4c00000 { + reg = <0x0 0xa4c00000 0x0 0x3c00000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + console-size = <0x200000>; + ecc-size = <0>; + ftrace-size = <0>; + pmsg-size = <0x200000>; + record-size = <0>; + }; + + /* Downstream dynamically allocates rmtfs_mem region using + * dma_alloc_coherent and adds 4k guard pages before and after + * it to workaround some "XPU limitation". */ + /* rmtfs_lower_guard */ + memory@f4100000 { + no-map; + reg = <0x0 0xf4100000 0x0 0x1000>; + }; + + rmtfs_mem: memory@f4101000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf4101000 0x0 0x300000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* rmtfs_upper_guard */ + memory@f4401000 { + no-map; + reg = <0x0 0xf4401000 0x0 0x1000>; + }; + }; + + vdd_boost_vreg: vdd-boost-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_boost_vreg"; + startup-delay-us = <4000>; + enable-active-high; + regulator-always-on; + gpio = <&pm8150b_gpios 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_boost_en_pin>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S4 is modeled as a fixed regulator in vendor sources */ + vreg_s4a_1p8: pm8150-s4-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s2a_0p6: smps2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-initial-mode = ; + regulator-name = "pm8150_s2a_0p6"; + }; + + vreg_s5a_1p9: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + regulator-name = "pm8150_s5a_0p6"; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + regulator-name = "pm8150_s6a_0p9"; + }; + + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l1a_0p75"; + }; + + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l2a_3p1"; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l3a_0p8"; + }; + + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l5a_0p875"; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l6a_1p2"; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l7a_1p8"; + }; + + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l9a_1p2"; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l10a_2p5"; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l11a_0p8"; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l12a_1p8"; + }; + + /* L13 is unused, but min/max are 3000000 for it. */ + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l14a_1p8"; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l15a_1p7"; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l16a_2p7"; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l17a_3p0"; + }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-name = "pm8150_l18a_0p8"; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <4000000>; + /* tavil-slim-pgd will request 3300000 */ + regulator-initial-mode = ; + regulator-allow-bypass; + regulator-name = "pm8150l_bob"; + }; + + vreg_s1c_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_s1c_1p1"; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_s8c_1p3"; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l1c_1p8"; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l2c_1p3"; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l3c_1p2"; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l4c_1p8"; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l5c_1p8"; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-name = "pm8150l_l6c_2p9"; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l7c_3p0"; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l8c_1p8"; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-name = "pm8150l_l9c_2p9"; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l10c_3p3"; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + regulator-name = "pm8150l_l11c_3p3"; + }; + }; +}; + +&pm8150_gpios { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; + +&pm8150b_gpios { + vdd_boost_en_pin: vdd-boost-en-pin { + pins = "gpio12"; + function = "normal"; + output-low; + qcom,drive-strength = ; + }; +}; + +&pon { + mode-recovery = <0x1>; + mode-bootloader = <0x2>; + mode-rtc = <0x3>; + mode-normal = <0x20>; + mode-panic = <0x21>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&tlmm { + /* gpios 0..3 are NFC spi, gpios 126..129 are FP spi */ + gpio-reserved-ranges = <0 4>, <126 4>; + + ai_key_pin_a: ai-key-pin-active { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + input-enable; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l5a_0p875>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5a_0p875>; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150-xiaomi-nabu.dts b/dts/upstream/src/arm64/qcom/sm8150-xiaomi-nabu.dts new file mode 100644 index 00000000000..52bdc359f08 --- /dev/null +++ b/dts/upstream/src/arm64/qcom/sm8150-xiaomi-nabu.dts @@ -0,0 +1,1174 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023-2024, map220v + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include +#include "sm8150.dtsi" +#include "sm8150-wcd9340.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &mpss_mem; +/delete-node/ &venus_mem; +/delete-node/ &slpi_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &spss_mem; +/delete-node/ &cdsp_mem; + +/ { + model = "Xiaomi Pad 5"; + compatible = "xiaomi,nabu", "qcom,sm8150"; + chassis-type = "tablet"; + qcom,msm-id = ; /* SM8150 v2.2 */ + qcom,board-id = <48 0>; + + aliases { + serial0 = &uart2; + hsuart0 = &uart13; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x02400000>; + width = <1600>; + height = <2560>; + stride = <(1600 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x5500000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x2200000>; + no-map; + }; + + mpss_mem: memory@8e000000 { + reg = <0x0 0x8e000000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@97600000 { + reg = <0x0 0x97600000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98f00000 { + reg = <0x0 0x98f00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98f10000 { + reg = <0x0 0x98f10000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98f15000 { + reg = <0x0 0x98f15000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@99000000 { + reg = <0x0 0x99000000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@99100000 { + reg = <0x0 0x99100000 0x0 0x1400000>; + no-map; + }; + + cdsp_sec_mem: memory@a4c00000 { + reg = <0x0 0xa4c00000 0x0 0x3c00000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + + rmtfs_mem: memory@fe101000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xfe101000 0 0x300000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <8720000>; + energy-full-design-microwatt-hours = <33600000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4480000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 115 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = ; + }; + + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = ; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + }; + + /* PM8009 is not present on these boards, even if downstream sources suggest so. */ +}; + +//SD860 additional cpu frequency +&cpu7_opp_table { + cpu7_opp21: opp-2956800000 { + opp-hz = /bits/ 64 <2956800000>; + opp-peak-kBps = <8368000 51609600>; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8150/xiaomi/nabu/a640_zap.mbn"; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c4 { + status = "okay"; + + typec-mux@43 { + compatible = "fcs,fsa4480"; + reg = <0x43>; + + vcc-supply = <&vreg_bob>; + + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pm8150b_sbu_mux_in>; + }; + }; + }; + + ln8000_charger@51 { + compatible = "lionsemi,ln8000"; + reg = <0x51>; + + status = "disabled"; + + irq-gpios = <&tlmm 36 0x2002>; + + usb-tcpm = <&pm8150b_typec>; + + ln8000_charger,bat-ovp-threshold = <4560>; + ln8000_charger,bat-ovp-alarm-threshold = <4525>; + ln8000_charger,bus-ovp-threshold = <13000>; + ln8000_charger,bus-ovp-alarm-threshold = <11000>; + ln8000_charger,bus-ocp-threshold = <3750>; + ln8000_charger,bus-ocp-alarm-threshold = <3500>; + ln8000_charger,ntc-alarm-cfg = <226>; + + ln8000_charger,tdie-prot-disable; + ln8000_charger,tbus-mon-disable; + ln8000_charger,tbat-mon-disable; + ln8000_charger,iin-ocp-disable; + ln8000_charger,iin-reg-disable; + ln8000_charger,tdie-reg-disable; + ln8000_charger,vbat-reg-disable; + }; +}; + +&i2c7 { + status = "okay"; + + cs35l41_br: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <81 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <1>; + sound-name-prefix = "BR"; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + }; + + cs35l41_tr: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <90 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <1>; + sound-name-prefix = "TR"; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + }; + + cs35l41_bl: cs35l41@42 { + compatible = "cirrus,cs35l41"; + reg = <0x42>; + interrupt-parent = <&tlmm>; + interrupts = <91 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <1>; + sound-name-prefix = "BL"; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + }; + + cs35l41_tl: cs35l41@43 { + compatible = "cirrus,cs35l41"; + reg = <0x43>; + interrupt-parent = <&tlmm>; + interrupts = <93 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <1>; + sound-name-prefix = "TL"; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <4>; + cirrus,gpio2-output-enable; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + compatible = "xiaomi,nabu-csot-nt36523", "novatek,nt36523"; + reg = <0>; + vddio-supply = <&vreg_l14a_1p8>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + rotation = <90>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l5a_0p8>; + phy-type = ; + status = "okay"; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l3c_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + status = "okay"; +}; + +&mdss_dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p8>; + phy-type = ; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pm8150b_fg { + status = "okay"; + monitored-battery = <&battery>; + //power-supplies = <&ln8000_charger>; +}; + +&pm8150b_typec { + vdd-pdphy-supply = <&vreg_l2a_3p1>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + source-pdos = ; + + sink-pdos = ; + + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pm8150b_sbu_mux_in: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; +}; + +&pm8150b_vbus { + status = "okay"; +}; + +&pm8150l_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + status = "okay"; +}; + +&q6afedai { + dai@72 { + reg = ; + qcom,tdm-sync-mode = <1>; + qcom,tdm-sync-src = <1>; + qcom,tdm-data-out = <0>; + qcom,tdm-invert-sync = <1>; + qcom,tdm-data-delay = <1>; + qcom,tdm-data-align = <0>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8150/xiaomi/nabu/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8150/xiaomi/nabu/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8150/xiaomi/nabu/modem.mbn"; +}; + +&sound { + compatible = "qcom,sm8150-sndcard"; + pinctrl-0 = <&quat_tdm_active + &quat_tdm_sd1_active>; + pinctrl-names = "default"; + model = "Xiaomi Pad 5"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC1", "MIC BIAS3", + "AMIC3", "MIC BIAS4", + "MultiMedia1 Playback", "BR SPK", + "MultiMedia1 Playback", "TR SPK", + "MultiMedia1 Playback", "BL SPK", + "MultiMedia1 Playback", "TL SPK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + speaker-dai-link { + link-name = "Speaker Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_TDM_RX_0>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&cs35l41_br 0>, <&cs35l41_tr 0>, + <&cs35l41_bl 0>, <&cs35l41_tl 0>; + }; + }; + + //Bottom & Top internal microphones + slimcap-dai-link { + link-name = "SLIM Capture 1"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9340 1>; /* AIF1_CAP */ + }; + }; +}; + +&spi18 { + status = "okay"; + + touchscreen@0 { + compatible = "novatek,NVT-ts-spi"; + reg = <0>; + + spi-max-frequency = <9600000>; + novatek,irq-gpio = <&tlmm 39 0x2001>; + + novatek,pen-support; + novatek,wgp-stylus; + + /* 523 */ + novatek,swrst-n8-addr = <0x03F0FE>; + novatek,spi-rd-fast-addr = <0x03F310>; + + firmware-name = "novatek/novatek_nt36523_fw.bin"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <126 4>; + + quat_tdm_active: quat-tdm-active-state { + pins = "gpio137", "gpio138"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + output-high; + }; + + quat_tdm_sd1_active: quat-tdm-sd1-active-state { + pins = "gpio140"; + function = "qua_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + qup_uart13_sleep: qup-uart13-sleep { + pinmux { + pins = "gpio43", "gpio44", + "gpio45", "gpio46"; + function = "gpio"; + }; + + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio43"; + bias-pull-down; + }; + + pinconf-rts { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio44"; + bias-pull-down; + }; + + pinconf-tx { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio45"; + bias-pull-up; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio46"; + bias-pull-up; + }; + }; + + bl_en_state: bl-default-state { + bl-en { + pins = "gpio27"; + function = "gpio"; + + drive-strength = <16>; + output-high; + bias-disable; + }; + }; + + keyboard_active: keyboard-active-state { + sleep-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio49"; + function = "gpio"; + drive-strength = <4>; + bias-pull-up; + output-high; + }; + + vdd-pins { + pins = "gpio82"; + function = "gpio"; + drive-strength = <4>; + bias-pull-up; + output-high; + }; + }; + + keyboard_suspend: keyboard-suspend-state { + sleep-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio49"; + function = "gpio"; + drive-strength = <4>; + bias-pull-down; + }; + + vdd-pins { + pins = "gpio82"; + function = "gpio"; + drive-strength = <4>; + bias-pull-down; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&uart13 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart13_sleep>; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l1a_0p75>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + local-bd-address = [ 21 00 00 00 5a ad ]; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p8>; + vdda-phy-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; + +&usb_1 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + maximum-speed = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pm8150b_role_switch_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p8>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&usb_2 { + /* USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; + status = "okay"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l5a_0p8>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; + pinctrl-0 = <&keyboard_active>; + pinctrl-1 = <&keyboard_suspend>; + pinctrl-names = "default", "sleep"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + maximum-speed = "high-speed"; + /* Remove USB3 phy */ + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 143 GPIO_ACTIVE_HIGH>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2750000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,hphl-jack-type-normally-open; + qcom,ground-jack-type-normally-open; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <2600000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; +}; + +&pm8150_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + status = "okay"; +}; + +&pm8150_sdam_2 { + status = "okay"; + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; diff --git a/dts/upstream/src/arm64/qcom/sm8150.dtsi b/dts/upstream/src/arm64/qcom/sm8150.dtsi index acdba79612a..264d5b2c5a9 100644 --- a/dts/upstream/src/arm64/qcom/sm8150.dtsi +++ b/dts/upstream/src/arm64/qcom/sm8150.dtsi @@ -9,7 +9,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -1693,6 +1695,17 @@ status = "disabled"; }; + uart13: serial@c8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_default>; + interrupts = ; + status = "disabled"; + }; + i2c14: i2c@c90000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c90000 0 0x4000>; @@ -2074,6 +2087,8 @@ resets = <&gcc GCC_UFS_PHY_BCR>; reset-names = "rst"; + power-domains = <&gcc UFS_PHY_GDSC>; + iommus = <&apps_smmu 0x300 0>; clock-names = @@ -2159,6 +2174,7 @@ <&apps_smmu 0x512 0x0000>; interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>; interconnect-names = "memory"; + status = "disable"; }; tcsr_mutex: hwlock@1f40000 { @@ -2594,6 +2610,13 @@ bias-disable; }; + qup_uart13_default: qup-uart13-default-state { + pins = "gpio43", "gpio44", "gpio45", "gpio46"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c14_default: qup-i2c14-default-state { pins = "gpio47", "gpio48"; function = "qup14"; @@ -4306,6 +4329,32 @@ dma-coherent; }; + slimbam: dma-controller@17184000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + qcom,controlled-remotely; + reg = <0 0x17184000 0 0x2c000>; + num-channels = <31>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1b46 0x0>; + }; + + slim: slim-ngd@171c0000 { + compatible = "qcom,slim-ngd-v2.1.0"; + reg = <0 0x171c0000 0 0x2c000>; + interrupts = ; + + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x1b46 0x0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,sm8150-adsp-pas"; reg = <0x0 0x17300000 0x0 0x4040>; @@ -4338,6 +4387,56 @@ qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + apr-service@3 { + reg = ; + compatible = "qcom,q6core"; + }; + + q6afe: apr-service@4 { + compatible = "qcom,q6afe"; + reg = ; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: cc { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: apr-service@7 { + compatible = "qcom,q6asm"; + reg = ; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1b21 0x0>; + }; + }; + + q6adm: apr-service@8 { + compatible = "qcom,q6adm"; + reg = ; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; @@ -4606,6 +4705,9 @@ }; }; + sound: sound { + }; + timer { compatible = "arm,armv8-timer"; interrupts = , -- 2.53.0