Received: from CH5PR02CU005.outbound.protection.outlook.com (mail-northcentralusazon11012030.outbound.protection.outlook.com [40.107.200.30]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D04C03E1D0C; Tue, 26 May 2026 23:54:28 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.107.200.30 ARC-Seal:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779839674; cv=fail; b=AnIes2KCSekU8m5hsyRmSoxIYvyMtZ4ZMWbi9AXCrXmV9xtkw60GzrKXrAY+BaEN23q0g+RrPLbnBzVqOqR+XLRq8ANjRplQgcbSCPR1xYxzbpm5ERNIrKS+SChvad7tOL1DRhMh6kPDVAbbPRwI85Pq8EzHm4Ewiw/xdKGai3E= ARC-Message-Signature:i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779839674; c=relaxed/simple; bh=MCTY7+O0iLmV4FNWHn+A5W2eZvk+tYyJN7viKtKqWLg=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=I1WUGgHDWfz2Aw5oIAZTJ6DPhHVjOQHxMFgeHsOIZMp3prmG+5Pz5QqzZ7OvIkvIZStfJ23uUTetNraME3OoQo+JE+C+M4mdfliy8AkvzhtCaURtku1coPNYrhbMazqNGA/to+qbHhgUOQXojEkuqTecLR49xv+3N+VUUCZM4/o= ARC-Authentication-Results:i=2; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com; spf=pass smtp.mailfrom=ti.com; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b=s8H2EFGH; arc=fail smtp.client-ip=40.107.200.30 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ti.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="s8H2EFGH" ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=VuSfx71swDh6Fyb8XFNkSrEYlZwksHTWffz46mpfWTqiV7fB0uULPC89RqDYAjgZj0yaKlYgURDNvaPqNZPzV2L4cbuSTHlsLN9ELxKpBQxpIt4PjYUspco/g1fJ/uj3HvR3bDv4o3AV0HaTKC1U0lQAWz75GHT3gBl2NZ3SqRm2QE0680Mc2COYJ9vTiZEhhriI8MQzQ1fdg/A3h6V2MzhKaSF2ML2QYIKjuucf/Yibb5mzL0VEImivVRzDOh/fo/01aGbw/sdq36QIQKMMZQ5ETClG6T2iz5uaj4sCfMbO1ZoHbV+6qdoH0cq1f/EoX0sRsatqYellwYg4an7GFQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=sVaKaPXEtiphBqge09WvGuu0v+iHJrepKZ342Uq4v9s=; b=UqYtiezUDV8JpDrNJ9VH7yBXELTMr7FV/TRJRBbjXe11s1f7FvJJNwQtM6oI7sXMMHobZhIQxb/MJK8QtmDze2fStgMdEEeQtWxgpYdweoOdNG+aE6kTLI3UOxICad2BXQda+E58AQQKGAcLhRkRN1GTr/X4iPIx24M64155AYPRis1vdXeh67zPwYTFW51tJrbolTUaaAG5Tp9pNPC3ua+A+IhLZXQg2OVDnNhz9yZGpRFw9t5j4tQqzRb7NtYPnaY7wCVN7X7ZpEtmHPjGo5kY1/LDjPZxvFaBl7H2M1iRRMYUewXL0g7PxqWS72WmoOQNUf4q2/5dH80meHAu1Q== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 198.47.23.194) smtp.rcpttodomain=microchip.com smtp.mailfrom=ti.com; dmarc=pass (p=quarantine sp=none pct=100) action=none header.from=ti.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=sVaKaPXEtiphBqge09WvGuu0v+iHJrepKZ342Uq4v9s=; b=s8H2EFGH48Q3H40HGg9IWIoI07fC37cY141sU3AaT/Nko2Yc1Ejk8pQumvNfL+Idalse8OKBXkpMXDxuO393CjbmyhPWu1WbGZ2JMVxt7IH5h76k09XPtjSN1lwKfhrPEBy4MXsjlbsD5c37h30wUbqKZY2h7jlY6yRP63/3NxI= Received: from SJ0PR03CA0378.namprd03.prod.outlook.com (2603:10b6:a03:3a1::23) by CH2PR10MB4311.namprd10.prod.outlook.com (2603:10b6:610:79::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.48.19; Tue, 26 May 2026 23:54:20 +0000 Received: from SJ5PEPF000001EF.namprd05.prod.outlook.com (2603:10b6:a03:3a1:cafe::30) by SJ0PR03CA0378.outlook.office365.com (2603:10b6:a03:3a1::23) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.21.71.12 via Frontend Transport; Tue, 26 May 2026 23:54:19 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 198.47.23.194) smtp.mailfrom=ti.com; dkim=none (message not signed) header.d=none;dmarc=pass action=none header.from=ti.com; Received-SPF: Pass (protection.outlook.com: domain of ti.com designates 198.47.23.194 as permitted sender) receiver=protection.outlook.com; client-ip=198.47.23.194; helo=lewvzet200.ext.ti.com; pr=C Received: from lewvzet200.ext.ti.com (198.47.23.194) by SJ5PEPF000001EF.mail.protection.outlook.com (10.167.242.203) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.71.7 via Frontend Transport; Tue, 26 May 2026 23:54:19 +0000 Received: from DLEE213.ent.ti.com (157.170.170.116) by lewvzet200.ext.ti.com (10.4.14.103) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37; Tue, 26 May 2026 18:54:18 -0500 Received: from DLEE208.ent.ti.com (157.170.170.97) by DLEE213.ent.ti.com (157.170.170.116) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37; Tue, 26 May 2026 18:54:17 -0500 Received: from lelvem-mr06.itg.ti.com (10.180.75.8) by DLEE208.ent.ti.com (157.170.170.97) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.37 via Frontend Transport; Tue, 26 May 2026 18:54:17 -0500 Received: from judy-hp.dhcp.ti.com (judy-hp.dhcp.ti.com [128.247.81.105]) by lelvem-mr06.itg.ti.com (8.18.1/8.18.1) with ESMTP id 64QNsHIR1896232; Tue, 26 May 2026 18:54:17 -0500 From: Judith Mendez To: Judith Mendez , Nishanth Menon , Vignesh Raghavendra CC: Tero Kristo , Rob Herring , "Krzysztof Kozlowski" , Conor Dooley , , , , Andrew Davis , Bryan Brattlof , Jason Kridner , Robert Nelson , Conor Dooley Subject: [PATCH v5 2/3] arm64: dts: ti: Add k3-am62l3-beaglebadge Date: Tue, 26 May 2026 18:54:16 -0500 Message-ID: <20260526235417.1326187-3-jm@ti.com> X-Mailer: git-send-email 2.54.0 In-Reply-To: <20260526235417.1326187-1-jm@ti.com> References: <20260526235417.1326187-1-jm@ti.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SJ5PEPF000001EF:EE_|CH2PR10MB4311:EE_ X-MS-Office365-Filtering-Correlation-Id: e79dc2a3-2efe-4d23-5665-08debb821a5f X-LD-Processed: e5b49634-450b-4709-8abb-1e2b19b982b7,ExtAddr X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|1800799024|82310400026|36860700016|376014|7416014|13003099007|18002099003|22082099003|56012099006|3023799007; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:198.47.23.194;CTRY:US;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:lewvzet200.ext.ti.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(1800799024)(82310400026)(36860700016)(376014)(7416014)(13003099007)(18002099003)(22082099003)(56012099006)(3023799007);DIR:OUT;SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: lwU+iWDqVnaFqVutVZPDW89mM3LxmVLZ+P0mtUeM2/UohDbVYE3LQ2vn9zoojboJ4vCpWwvZU/j92/8dPvTIYN78botdKr/YEdv19oMJAFHl8UUHHCXT2NX12gBq99a312eAA775n0v2sefKgh+KG3FK9Z8AgqjCzpBiOukNvSuKBQ9iaqN1Uw3SNRDmmZswpp8+RsHYKzaDUWmDWbNi5hPKfdeTRTRe2xBN+vi7DD7luUnfZOtXx1vDCJZscBNyXejfROsLb87Z/5C1ZSr9KOyoge2i5mSkym4utGMzNiLQZVXOYn0h0+2UftxsFgT0DQ1U48ABcyokxJgKiErxPq+6K4J8EexVkjOm+ZWjZZS255c6Q/FpaXYdB8srOtyc+sS0V/k8cUibfO1BA1eufMYazHXD7rWiw0Lvvl8qjR+dQf8H0q+olYYKchFmhCbx X-OriginatorOrg: ti.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 May 2026 23:54:19.4459 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: e79dc2a3-2efe-4d23-5665-08debb821a5f X-MS-Exchange-CrossTenant-Id: e5b49634-450b-4709-8abb-1e2b19b982b7 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=e5b49634-450b-4709-8abb-1e2b19b982b7;Ip=[198.47.23.194];Helo=[lewvzet200.ext.ti.com] X-MS-Exchange-CrossTenant-AuthSource: SJ5PEPF000001EF.namprd05.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH2PR10MB4311 BeagleBoard.org BeagleBadge is a compact, affordable open source hardware single board computer based on the Texas Instruments AM62L3 SoC designed for IoT and embedded applications with low power consumption. Expansion is provided over open standards based headers including QWIIC and GPIO interfaces. https://www.beagleboard.org/boards/beaglebadge Co-developed-by: Andrew Davis Signed-off-by: Andrew Davis Signed-off-by: Judith Mendez --- Changelog since v4: - Canonical URL fixed - Switch gpio -> gpios in voltage regulator nodes - Regulator-always-on removed in sensor_3v3 - Add bootph-all on pinmux nodes - Fix gpio-line-names formatting - Nodes: sdhci2, wlan_en regulator, & pinmux removed - USB aliases removed --- arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am62l3-beaglebadge.dts | 658 ++++++++++++++++++ 2 files changed, 659 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 5269c9619b65c..4e377ca011cd8 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb # Boards with AM62Lx SoCs dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-beaglebadge.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts new file mode 100644 index 0000000000000..8e816d21a586f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62l3-beaglebadge.dts @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * https://www.beagleboard.org/boards/beaglebadge + * + * Copyright (C) 2026 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include +#include +#include +#include "k3-am62l3.dtsi" +#include "k3-pinctrl.h" + +/ { + compatible = "beagle,am62l3-beaglebadge", "ti,am62l3"; + model = "BeagleBoard.org BeagleBadge"; + + chosen { + stdout-path = &uart0; + }; + + aliases { + gpio0 = &gpio0; + gpio2 = &wkup_gpio0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c4 = &wkup_i2c0; + mmc1 = &sdhci1; + serial3 = &uart1; + }; + + memory@80000000 { + /* 256MB */ + reg = <0x00000000 0x80000000 0x00000000 0x10000000>; + device_type = "memory"; + bootph-all; + }; + + thermal-zones { + wkup0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&vtm0 0>; + + trips { + crit0 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-select { + label = "SELECT"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + + button-back { + label = "BACK"; + linux,code = ; + gpios = <&gpio0 104 GPIO_ACTIVE_LOW>; + }; + + button-up { + label = "UP"; + linux,code = ; + gpios = <&gpio0 32 GPIO_ACTIVE_LOW>; + }; + + button-down { + label = "DOWN"; + linux,code = ; + gpios = <&gpio0 42 GPIO_ACTIVE_LOW>; + }; + + button-left { + label = "LEFT"; + linux,code = ; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + }; + + button-right { + label = "RIGHT"; + linux,code = ; + gpios = <&gpio0 95 GPIO_ACTIVE_LOW>; + }; + }; + + multicolor-led { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = ; + max-brightness = <255>; + + led-red { + pwms = <&ecap2 0 10000000 0>; + color = ; + }; + + led-green { + pwms = <&ecap1 0 10000000 0>; + color = ; + }; + + led-blue { + pwms = <&epwm1 1 10000000 0>; + color = ; + }; + }; + }; + + seven-segment-left { + compatible = "gpio-7-segment"; + segment-gpios = <&mcp23s18 0 GPIO_ACTIVE_LOW>, + <&mcp23s18 1 GPIO_ACTIVE_LOW>, + <&mcp23s18 2 GPIO_ACTIVE_LOW>, + <&mcp23s18 3 GPIO_ACTIVE_LOW>, + <&mcp23s18 4 GPIO_ACTIVE_LOW>, + <&mcp23s18 5 GPIO_ACTIVE_LOW>, + <&mcp23s18 6 GPIO_ACTIVE_LOW>, + <&mcp23s18 7 GPIO_ACTIVE_LOW>; + }; + + seven-segment-right { + compatible = "gpio-7-segment"; + segment-gpios = <&mcp23s18 8 GPIO_ACTIVE_LOW>, + <&mcp23s18 9 GPIO_ACTIVE_LOW>, + <&mcp23s18 10 GPIO_ACTIVE_LOW>, + <&mcp23s18 11 GPIO_ACTIVE_LOW>, + <&mcp23s18 12 GPIO_ACTIVE_LOW>, + <&mcp23s18 13 GPIO_ACTIVE_LOW>, + <&mcp23s18 14 GPIO_ACTIVE_LOW>, + <&mcp23s18 15 GPIO_ACTIVE_LOW>; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&epwm0 1 1000000 0>; + amp-supply = <&sensor_3v3>; + }; + + vsys_out: regulator-0 { + /* output of BQ24070 */ + compatible = "regulator-fixed"; + regulator-name = "VSYS_OUT"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vcc_3v3_main: regulator-1 { + /* output of TPS62A06 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_out>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + /* output of TPS22965 */ + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_main>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3_sd: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + regulator-boot-on; + enable-active-high; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_ena_pins_default>; + bootph-all; + }; + + sensor_3v3: regulator-4 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "Sensor_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + regulator-boot-on; + enable-active-high; + gpios = <&wkup_gpio0 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sensor_3v3_ena_pins_default>; + bootph-all; + }; +}; + +&pmx0 { + uart0_pins_default: uart0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */ + AM62LX_IOPAD(0x01b4, PIN_INPUT, 0) /* (D13) UART0_RXD */ + >; + bootph-all; + }; + + uart0_pins_wakeup: uart0-wakeup-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01b8, PIN_OUTPUT, 0) /* (C13) UART0_TXD */ + AM62LX_IOPAD(0x01b4, PIN_INPUT | PIN_WKUP_EN, 0) /* (D13) UART0_RXD */ + >; + bootph-all; + }; + + uart1_pins_default: uart1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x019c, PIN_OUTPUT, 2) /* (A12) MCASP0_ACLKR.UART1_TXD */ + AM62LX_IOPAD(0x0198, PIN_INPUT, 2) /* (C11) MCASP0_AFSR.UART1_RXD */ + AM62LX_IOPAD(0x0180, PIN_INPUT, 2) /* (A8) MCASP0_AXR3.UART1_CTSn */ + AM62LX_IOPAD(0x0184, PIN_OUTPUT, 2) /* (B10) MCASP0_AXR2.UART1_RTSn */ + >; + bootph-all; + }; + + usr_button_pins_default: usr-button-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00a4, PIN_INPUT, 7) /* (H18) GPMC0_AD11.GPIO0_26 */ + AM62LX_IOPAD(0x01e4, PIN_INPUT, 7) /* (D16) EXT_REFCLK1.GPIO0_104 */ + AM62LX_IOPAD(0x00c0, PIN_INPUT, 7) /* (N19) GPMC0_ADVn_ALE.GPIO0_32 */ + AM62LX_IOPAD(0x00e8, PIN_INPUT, 7) /* (L19) GPMC0_CSn1.GPIO0_42 */ + AM62LX_IOPAD(0x00b8, PIN_INPUT, 7) /* (L21) GPMC0_CLK.GPIO0_31 */ + AM62LX_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) UART0_RTSn.GPIO0_95 */ + >; + bootph-all; + }; + + i2c0_pins_default: i2c0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01cc, PIN_INPUT_PULLUP, 0) /* (B7) I2C0_SCL */ + AM62LX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 0) /* (A7) I2C0_SDA */ + >; + bootph-all; + }; + + i2c1_pins_default: i2c1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 0) /* (D7) I2C1_SCL */ + AM62LX_IOPAD(0x01d8, PIN_INPUT_PULLUP, 0) /* (A6) I2C1_SDA */ + >; + bootph-all; + }; + + i2c2_qwiic_pins_default: i2c2-qwiic-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01dc, PIN_INPUT_PULLUP, 0) /* (B8) I2C2_SCL */ + AM62LX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D8) I2C2_SDA */ + >; + bootph-all; + }; + + vdd_3v3_sd_ena_pins_default: vdd-3v3-sd-ena-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (L23) GPMC0_AD1.GPIO0_16 */ + >; + bootph-all; + }; + + sensor_3v3_ena_pins_default: sensor-3v3-ena-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x004, PIN_OUTPUT, 7) /* (AA23) WKUP_UART0_TXD.WKUP_GPIO0_1 */ + >; + bootph-all; + }; + + mmc1_pins_default: mmc1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0230, PIN_INPUT, 0) /* (Y3) MMC1_CMD */ + AM62LX_IOPAD(0x0228, PIN_OUTPUT, 0) /* (Y2) MMC1_CLK */ + AM62LX_IOPAD(0x0224, PIN_INPUT, 0) /* (AA1) MMC1_DAT0 */ + AM62LX_IOPAD(0x0220, PIN_INPUT, 0) /* (Y4) MMC1_DAT1 */ + AM62LX_IOPAD(0x021c, PIN_INPUT, 0) /* (AA2) MMC1_DAT2 */ + AM62LX_IOPAD(0x0218, PIN_INPUT, 0) /* (AB2) MMC1_DAT3 */ + AM62LX_IOPAD(0x0234, PIN_INPUT, 7) /* (B6) MMC1_SDCD.GPIO0_122 */ + >; + bootph-all; + }; + + usb1_pins_default: usb1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0248, PIN_INPUT | PIN_DS_PULLUD_ENABLE | + PIN_DS_PULL_UP, 0) /* (A5) USB1_DRVVBUS */ + >; + bootph-all; + }; + + pwm_beeper_pins_default: pwm-beeper-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00b0, PIN_OUTPUT, 4) /* (F22) GPMC0_AD14.EHRPWM0_B */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x01e8, PIN_INPUT, 0) /* (C8) EXTINTn */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0010, PIN_INPUT_PULLUP, 0) /* (AB22) WKUP_I2C0_SCL */ + AM62LX_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (AA22) WKUP_I2C0_SDA */ + >; + bootph-all; + }; + + rgb_led_ecap2_pins_default: rgb-led-ecap2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0190, PIN_OUTPUT, 2) /* (A11) MCASP0_ACLKX.ECAP2_IN_APWM_OUT */ + >; + }; + + rgb_led_ecap1_pins_default: rgb-led-ecap1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0188, PIN_OUTPUT, 2) /* (A9) MCASP0_AXR1.ECAP1_IN_APWM_OUT */ + >; + }; + + rgb_led_epwm1_pins_default: rgb-led-epwm1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x018c, PIN_OUTPUT, 5) /* (B9) MCASP0_AXR0.EHRPWM1_B */ + >; + }; + + spi1_pins_default: spi1-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x008c, PIN_OUTPUT, 4) /* (H22) GPMC0_AD5.SPI1_CLK */ + AM62LX_IOPAD(0x0088, PIN_OUTPUT, 4) /* (K23) GPMC0_AD4.SPI1_CS0 */ + AM62LX_IOPAD(0x0080, PIN_INPUT, 4) /* (K22) GPMC0_AD2.SPI1_D0 */ + AM62LX_IOPAD(0x0084, PIN_OUTPUT, 4) /* (J23) GPMC0_AD3.SPI1_D1 */ + >; + bootph-all; + }; + + spi3_pins_default: spi3-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00d0, PIN_OUTPUT, 5) /* (P22) GPMC0_BE1n.SPI3_CLK */ + AM62LX_IOPAD(0x00cc, PIN_OUTPUT, 5) /* (P23) GPMC0_BE0n_CLE.SPI3_CS0 */ + AM62LX_IOPAD(0x00d4, PIN_INPUT, 5) /* (N23) GPMC0_WAIT0.SPI3_D0 */ + AM62LX_IOPAD(0x00d8, PIN_OUTPUT, 5) /* (N22) GPMC0_WAIT1.SPI3_D1 */ + >; + }; + + mcp23s18_reset_pins_default: mcp23s18-reset-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00a0, PIN_OUTPUT, 7) /* (H21) GPMC0_AD10.GPIO0_25 */ + >; + }; + + epwm2_pins_default: epwm2-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00c4, PIN_OUTPUT, 4) /* (N20) GPMC0_OEn_REn.EHRPWM2_A */ + >; + }; + + lora_control_pins_default: lora-control-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (M19) GPMC0_WEn.GPIO0_34 */ + AM62LX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (L20) GPMC0_CSn0.GPIO0_41 */ + AM62LX_IOPAD(0x01a4, PIN_INPUT, 7) /* (D11) SPI0_CS1.GPIO0_88 */ + AM62LX_IOPAD(0x01bc, PIN_INPUT, 7) /* (B14) UART0_CTSn.GPIO0_94 */ + >; + bootph-all; + }; + + gpio0_pins_default: gpio0-default-pins { + pinctrl-single,pins = < + AM62LX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (L22) GPMC0_AD0.GPIO0_15 */ + AM62LX_IOPAD(0x00e0, PIN_INPUT, 7) /* (M21) GPMC0_DIR.GPIO0_40 */ + AM62LX_IOPAD(0x00ec, PIN_OUTPUT, 7) /* (M23) GPMC0_CSn2.GPIO0_43 */ + AM62LX_IOPAD(0x00f0, PIN_INPUT, 7) /* (M22) GPMC0_CSn3.GPIO0_44 */ + AM62LX_IOPAD(0x0194, PIN_OUTPUT, 7) /* (B11) MCASP0_AFSX.GPIO0_84 */ + >; + bootph-all; + }; +}; + +&uart0 { + wakeup-source; + pinctrl-0 = <&uart0_pins_default>; + pinctrl-1 = <&uart0_pins_wakeup>; + pinctrl-names = "default", "wakeup"; + bootph-all; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_default>; + bootph-all; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_default>; + bootph-all; + status = "okay"; + + /* T&H Sensor */ + th-sensor@44 { + compatible = "sensirion,sht4x"; + reg = <0x44>; + }; + + /* EEPROM */ + eeprom@50 { + /* FT24C32A-ELRT */ + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + /* Fuel Gauge */ + fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + + /* IMU Sensor */ + accelerometer@6a { + compatible = "st,lsm6ds3tr-c"; + reg = <0x6a>; + vdd-supply = <&vcc_3v3_main>; + vddio-supply = <&vcc_3v3_main>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + bootph-all; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_qwiic_pins_default>; + bootph-all; + status = "okay"; +}; + +&wkup_i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + bootph-all; + status = "okay"; + + tps65214: pmic@30 { + compatible = "ti,tps65214"; + reg = <0x30>; + interrupt-parent = <&gic500>; + interrupts = ; + buck1-supply = <&vcc_3v3_main>; + buck2-supply = <&vcc_3v3_main>; + buck3-supply = <&vcc_3v3_main>; + ldo1-supply = <&vcc_3v3_main>; + ldo2-supply = <&vcc_3v3_main>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + ti,power-button; + bootph-all; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "PMIC_VDD_RTC"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&gpio0 { + gpio-line-names = "","","","","","","","","","", /* 0-9 */ + "","","","","","BOOST_5V_ENA","VDD_3V3_SD_ENA","","","", /* 10-19 */ + "","","","","","MCP23S18_RESET","BTN_SELECT","","","", /* 20-29 */ + "","BTN_LEFT","BTN_UP","","LORA_RESET","","","","","", /* 30-39 */ + "GAUGE_BATLOW","LORA_RFSW","BTN_DOWN","USB_RST","MBUS_INT","","","","","", /* 40-49 */ + "","WLAN_EN","","","","","","","","", /* 50-59 */ + "","","","","","","","","","", /* 60-69 */ + "","","","","","","","","","", /* 70-79 */ + "","","","","MBUS_RST","","","","LORA_BUSY","", /* 80-89 */ + "","","","","LORA_DIO","BTN_RIGHT","","","","", /* 90-99 */ + "","","","","BTN_BACK","","","","","", /* 100-109 */ + "","","","","","","","","","", /* 110-119 */ + "","","SD_CD","","",""; /* 120-125 */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_pins_default>, <&usr_button_pins_default>, <&lora_control_pins_default>; + bootph-all; + status = "okay"; +}; + +&wkup_gpio0 { + gpio-line-names = "","SENSOR_3V3_ENA","","","","","",""; /* 0-7 */ + bootph-all; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_3v3_sd>; + disable-wp; + cd-gpios = <&gpio0 122 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + ti,fails-without-test-cd; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + bootph-all; + status = "okay"; +}; + +&epwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_beeper_pins_default>; + status = "okay"; +}; + +&epwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_epwm1_pins_default>; + status = "okay"; +}; + +&epwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&epwm2_pins_default>; + status = "okay"; +}; + +&ecap1 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_ecap1_pins_default>; + status = "okay"; +}; + +&ecap2 { + pinctrl-names = "default"; + pinctrl-0 = <&rgb_led_ecap2_pins_default>; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + usb-role-switch; + bootph-all; + status = "okay"; +}; + +&usbss1 { + ti,vbus-divider; + bootph-all; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; + bootph-all; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_default>; + status = "okay"; + + mcp23s18: gpio@0 { + compatible = "microchip,mcp23s18"; + reg = <0>; + spi-max-frequency = <10000000>; + gpio-controller; + #gpio-cells = <2>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mcp23s18_reset_pins_default>; + microchip,spi-present-mask = /bits/ 8 <0x01>; + }; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_default>; + status = "okay"; +}; -- 2.54.0