From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev,
	Peng Fan <peng.fan@nxp.com>,
	Frank Li <Frank.Li@nxp.com>,
	Ulf Hansson <ulfh@kernel.org>
Subject: [PATCH 6.6 1126/1266] pmdomain: imx: Fix i.MX8MP VC8000E power up sequence
Date: Tue, 21 Jul 2026 17:26:03 +0200
Message-ID: <20260721152506.993011068@linuxfoundation.org>
In-Reply-To: <20260721152441.786066624@linuxfoundation.org>
References: <20260721152441.786066624@linuxfoundation.org>
User-Agent: quilt/0.69
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peng Fan <peng.fan@nxp.com>

commit 25e252bcf1593b420b12a7231d9dd64b885a2ae2 upstream.

Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)

Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A

Fixes: a1a5f15f7f6cb ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pmdomain/imx/imx8m-blk-ctrl.c |   19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

--- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c
@@ -54,6 +54,15 @@ struct imx8m_blk_ctrl_domain_data {
 	 * register.
 	 */
 	u32 mipi_phy_rst_mask;
+
+	/*
+	 * VC8000E reset de-assertion edge and AXI clock may have a timing issue.
+	 * Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
+	 * both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
+	 * VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
+	 * de-asserted by HW)
+	 */
+	bool is_errata_err050531;
 };
 
 #define DOMAIN_MAX_CLKS 4
@@ -108,7 +117,11 @@ static int imx8m_blk_ctrl_power_on(struc
 		dev_err(bc->dev, "failed to enable clocks\n");
 		goto bus_put;
 	}
-	regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
+
+	if (data->is_errata_err050531)
+		regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
+	else
+		regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
 
 	/* power up upstream GPC domain */
 	ret = pm_runtime_get_sync(domain->power_dev);
@@ -117,6 +130,9 @@ static int imx8m_blk_ctrl_power_on(struc
 		goto clk_disable;
 	}
 
+	if (data->is_errata_err050531)
+		regmap_set_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
+
 	/* wait for reset to propagate */
 	udelay(5);
 
@@ -510,6 +526,7 @@ static const struct imx8m_blk_ctrl_domai
 		.clk_mask = BIT(2),
 		.path_names = (const char *[]){"vc8000e"},
 		.num_paths = 1,
+		.is_errata_err050531 = true,
 	},
 };