From: Fabio Estevam <festevam@gmail.com>
To: heiko@sntech.de
Cc: robh@kernel.org,
	krzk+dt@kernel.org,
	conor+dt@kernel.org,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v2 1/2] arm64: dts: rockchip: Fix the BT clock-names on rk3399-hugsun-x99
Date: Fri,  7 Aug 2026 08:24:31 -0300
Message-ID: <20260807112432.49685-1-festevam@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

According to brcm,bluetooth.yaml, the correct clock-names to describe
the 32768kHz Low Power Oscillator is "lpo".

Change it accordingly to fix the following dt-schema warning:

clock-names: 'oneOf' conditional failed, one must be fixed:
        ['ext_clock'] is too short
        'extclk' was expected
        'txco' was expected
        'lpo' was expected

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Use "lpo" name instead. (Sashiko)

 arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index 352c8efb37e0..27ebbbc66633 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -703,7 +703,7 @@ &uart0 {
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-- 
2.43.0