Subject: FAILED: patch "[PATCH] usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command" failed to apply to 5.15-stable tree
To: huangwei@kylinos.cn,boddah8794@gmail.com,gregkh@linuxfoundation.org,heikki.krogerus@linux.intel.com
Cc: <stable@vger.kernel.org>
From: <gregkh@linuxfoundation.org>
Date: Thu, 03 Sep 2026 14:40:08 +0200
Message-ID: <2026090308-uneasy-legible-48cb@gregkh>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=ANSI_X3.4-1968
Content-Transfer-Encoding: 8bit


The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x eb4573cf2fd860b20adfae050c3f6ec6ddc3abdb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090308-uneasy-legible-48cb@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:


thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From eb4573cf2fd860b20adfae050c3f6ec6ddc3abdb Mon Sep 17 00:00:00 2001
From: Huang Wei <huangwei@kylinos.cn>
Date: Wed, 5 Aug 2026 16:57:25 +0800
Subject: [PATCH] usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command
 completion

The synchronous command completion path in ucsi_sync_control_common()
hardcodes a 5 second (5 * HZ) timeout when waiting for the PPM to signal
command completion via ACPI notification. This value matched
UCSI_TIMEOUT_MS when it was still 5000 ms, but it was not updated when
that macro was later raised to 10000 ms to fix PPM reset timeouts.

As a result, the two PPM communication paths are now inconsistent: the
polling path in ucsi_reset_ppm() respects the 10 second timeout, while
the event-driven completion path still uses 5 seconds. On machines where
the firmware is slow to respond during boot (e.g. some Lenovo ThinkPad
models such as the E14 Gen 7), commands sent after the PPM reset, such
as SET_NOTIFICATION_ENABLE and GET_CAPABILITY, can exceed 5 seconds and
cause UCSI initialization to fail with:

    ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed

Once UCSI init aborts, USB-C PD negotiation never completes, which in
turn blocks USB-C dock enumeration since the dock depends on a successful
PD contract.

Replace the hardcoded 5 * HZ with msecs_to_jiffies(UCSI_TIMEOUT_MS) so
that both communication paths share a single, consistent timeout value,
and future adjustments to UCSI_TIMEOUT_MS are picked up automatically.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=221740
Link: https://bugzilla.kernel.org/show_bug.cgi?id=2183790
Fixes: bf4f9ae1cb08c ("usb: typec: ucsi: increase timeout for PPM reset operations")
Cc: stable@vger.kernel.org
Signed-off-by: Huang Wei <huangwei@kylinos.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Fedor Pchelkin <boddah8794@gmail.com>
Link: https://patch.msgid.link/20260805085725.389761-1-huangwei@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index ecbda2a3783c..bef3f9b71d71 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -91,7 +91,8 @@ int ucsi_sync_control_common(struct ucsi *ucsi, u64 command, u32 *cci,
 	if (ret)
 		goto out_clear_bit;
 
-	if (!wait_for_completion_timeout(&ucsi->complete, 5 * HZ))
+	if (!wait_for_completion_timeout(&ucsi->complete,
+					 msecs_to_jiffies(UCSI_TIMEOUT_MS)))
 		ret = -ETIMEDOUT;
 
 out_clear_bit: