Subject: FAILED: patch "[PATCH] serial: imx: serialize imx_uart_ports[] lifetime" failed to apply to 6.6-stable tree
To: kmehltretter@gmail.com,Frank.Li@nxp.com,gregkh@linuxfoundation.org,sashiko-bot@kernel.org
Cc: <stable@vger.kernel.org>
From: <gregkh@linuxfoundation.org>
Date: Thu, 03 Sep 2026 14:38:32 +0200
Message-ID: <2026090332-sizing-praising-4243@gregkh>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=ANSI_X3.4-1968
Content-Transfer-Encoding: 8bit


The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 8b0b29fdcb47907ae0296b8fe829e918e05e300f
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026090332-sizing-praising-4243@gregkh' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Possible dependencies:


thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 8b0b29fdcb47907ae0296b8fe829e918e05e300f Mon Sep 17 00:00:00 2001
From: Karl Mehltretter <kmehltretter@gmail.com>
Date: Fri, 31 Jul 2026 20:18:44 +0200
Subject: [PATCH] serial: imx: serialize imx_uart_ports[] lifetime

imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.

A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.

Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe.

Fixes: dbff4e9ea2e8 ("IMX UART: remove statically initialized tables")
Fixes: 9f322ad064f9 ("imx: serial: handle initialisation failure correctly")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/all/20260719162850.043B41F000E9@smtp.kernel.org
Link: https://lore.kernel.org/all/20260719222501.CB4CB1F000E9@smtp.kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260731181844.11330-6-kmehltretter@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 95fdb60e06a7..513dbe95f7e9 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/ktime.h>
+#include <linux/mutex.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/rational.h>
 #include <linux/slab.h>
@@ -2080,6 +2081,9 @@ static const struct uart_ops imx_uart_pops = {
 
 static struct imx_port *imx_uart_ports[UART_NR];
 
+/* Held across uart_add/remove_one_port(); console callbacks must not take it. */
+static DEFINE_MUTEX(imx_uart_ports_lock);
+
 #if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
 static void imx_uart_console_putchar(struct uart_port *port, unsigned char ch)
 {
@@ -2621,11 +2625,19 @@ static int imx_uart_probe(struct platform_device *pdev)
 			goto err_clk;
 	}
 
-	imx_uart_ports[sport->port.line] = sport;
-
 	platform_set_drvdata(pdev, sport);
 
-	ret = uart_add_one_port(&imx_uart_uart_driver, &sport->port);
+	scoped_guard(mutex, &imx_uart_ports_lock) {
+		if (imx_uart_ports[sport->port.line]) {
+			ret = -EBUSY;
+		} else {
+			imx_uart_ports[sport->port.line] = sport;
+			ret = uart_add_one_port(&imx_uart_uart_driver,
+						&sport->port);
+			if (ret)
+				imx_uart_ports[sport->port.line] = NULL;
+		}
+	}
 
 err_clk:
 	clk_disable_unprepare(sport->clk_ipg);
@@ -2637,7 +2649,9 @@ static void imx_uart_remove(struct platform_device *pdev)
 {
 	struct imx_port *sport = platform_get_drvdata(pdev);
 
+	guard(mutex)(&imx_uart_ports_lock);
 	uart_remove_one_port(&imx_uart_uart_driver, &sport->port);
+	imx_uart_ports[sport->port.line] = NULL;
 }
 
 static void imx_uart_restore_context(struct imx_port *sport)