From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev,
	Tzung-Bi Shih <tzungbi@kernel.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.12 0750/1102] watchdog: msc313e: Enable clock before accessing hardware registers
Date: Thu, 17 Sep 2026 16:11:33 +0100
Message-ID: <20260917151559.248540442@linuxfoundation.org>
In-Reply-To: <20260917151539.408551884@linuxfoundation.org>
References: <20260917151539.408551884@linuxfoundation.org>
User-Agent: quilt/0.69
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

6.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tzung-Bi Shih <tzungbi@kernel.org>

[ Upstream commit 3db2df24e7f11fb117718f6abe326628d91bc500 ]

msc313e_wdt_probe() reads from hardware registers without ensuring the
required clock is enabled.  Furthermore, if the bootloader leaves the
watchdog running, msc313e_wdt_probe() sets WDOG_HW_RUNNING without
increasing the clock's reference count.

While the clock is currently supplied as a fixed clock by the device
tree (`xtal_div2` in arch/arm/boot/dts/sigmastar/mstar-v7.dtsi) which
masks the physical issue, this still violates the API usage.

Call clk_prepare_enable() before reading WDT registers.  If the WDT is
running, leave the clock enabled so the CCF reference counter is
balanced.

Fixes: ffd264bd152c ("watchdog: msc313e: Check if the WDT was running at boot")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260828161348.13212-5-tzungbi@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/msc313e_wdt.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/msc313e_wdt.c b/drivers/watchdog/msc313e_wdt.c
index 5dc5e3ab7001e..86e72aea96855 100644
--- a/drivers/watchdog/msc313e_wdt.c
+++ b/drivers/watchdog/msc313e_wdt.c
@@ -109,6 +109,7 @@ static int msc313e_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct msc313e_wdt_priv *priv;
 	unsigned long rate;
+	int ret;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -134,9 +135,21 @@ static int msc313e_wdt_probe(struct platform_device *pdev)
 	priv->wdev.max_timeout = U32_MAX / rate;
 	priv->wdev.timeout = MSC313E_WDT_DEFAULT_TIMEOUT;
 
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
 	/* If the period is non-zero the WDT is running */
-	if (readw(priv->base + REG_WDT_MAX_PRD_L) | (readw(priv->base + REG_WDT_MAX_PRD_H) << 16))
+	if (readw(priv->base + REG_WDT_MAX_PRD_L) | (readw(priv->base + REG_WDT_MAX_PRD_H) << 16)) {
 		set_bit(WDOG_HW_RUNNING, &priv->wdev.status);
+		/*
+		 * Keep the clock enabled. The watchdog core will skip the next
+		 * start() and a future stop() will balance the CCF reference
+		 * count.
+		 */
+	} else {
+		clk_disable_unprepare(priv->clk);
+	}
 
 	watchdog_set_drvdata(&priv->wdev, priv);
 	platform_set_drvdata(pdev, priv);
@@ -145,7 +158,13 @@ static int msc313e_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(&priv->wdev);
 	watchdog_stop_on_unregister(&priv->wdev);
 
-	return devm_watchdog_register_device(dev, &priv->wdev);
+	ret = devm_watchdog_register_device(dev, &priv->wdev);
+
+	/* If the WDT is running and anything goes wrong, disable the clock. */
+	if (ret && test_bit(WDOG_HW_RUNNING, &priv->wdev.status))
+		clk_disable_unprepare(priv->clk);
+
+	return ret;
 }
 
 static int __maybe_unused msc313e_wdt_suspend(struct device *dev)
-- 
2.53.0