Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=100.103.45.18 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1795054673; b=RejJcci9FUAfRN2g121A2DTMFD2U1ujzgnpfi3F7BjtH92ECWfD8ZbZ1WT5MGi5c5xEN CttG71w8S+S3n44R3RoxVO6cdioxvoW5jvOHfnQA3lOSCEksBbaTUbFjIQlnAuTuLZiYY XvyJpfzdYUzVSy83ZGVW2S/tPJJbEBxGUNAswbDulUlAdpGAR+TmNBf17hVDx7HN8aumc 0SiwVOdN30uuUqH/0bLNJ8fTEx//zTEH2+5iomH5lUxXUs4RfM7xYGs8Sdv9tUbfaBsbL Hq4JTtniccd0mt+Zor9PwCIheIMLDMD5hVJa4MsQzYgrWTapvbFPw233yGkY7eVaWoQ== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1795054673; h=Received:DKIM-Signature:From:To:Cc:Subject:Date:Message-ID:X-Mailer: In-Reply-To:References:User-Agent:X-stable:X-Patchwork-Hint: MIME-Version:Content-Type:Content-Transfer-Encoding; bh=qePf16wgf2dQI30B9/BCsWmbRMyFhTxr60Tn0ruQKQI=; b=kRovoPYF3IYmyb76JSf5Fs1fc04wXG36zG1OugcKhjkbnk/Bb7Ud71YEwKcYZUpIP1qm mlkE/MDvOQTnV4+NRBn4ouERYNvbMvOOIlDyssd7iI4hQmOxX2Phy2Q/GQEbpo3qWGG9n LLBD6UiEeKvR978XEBbikky3TCHz6xoSYo8Cf+Dcq+JblZkH1rxPOvQOkPvWyH9IqZ2fo 3UjlGYdE11oOUIJuO8VOqqseMFlNuXNZzJNzy/00W8hJCRMCcLTob8VVydN6irfiP6rm5 tMuCGY8ZfzhM6kqObFRTxkPgP3e/Wr9DhMbTkSB5/9CEQC8T0FPvUudd+9HElBnSWRA== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b="KZJIQq/L"; arc=none smtp.remote-ip=100.103.45.18 Received: from smtp.kernel.org (quasi.space.kernel.org [100.103.45.18]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 77F7E606A31C; Thu, 19 Nov 2026 02:17:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=linuxfoundation.org header.i=@linuxfoundation.org header.a=rsa-sha256 header.s=korg header.b=KZJIQq/L Received: by smtp.kernel.org (Postfix) with ESMTPSA id CD9041F000C4; Thu, 19 Nov 2026 02:17:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linuxfoundation.org; s=korg; t=1795054673; bh=qePf16wgf2dQI30B9/BCsWmbRMyFhTxr60Tn0ruQKQI=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=KZJIQq/LZUOCKsso/tUuRgyHKtya/8M9hnO4EQGiO8PflIIbm+6oATzDlBi4MSjyZ kaeOUidQQ4hQJPYuPEy1OKSZ9J5lRrBLz3I1x+O1CIOI+l72qHplDVmAvXJRvtEjE5 Y2IbK+jd3N5nB82pyPisWWTTyO3Q58MF14rd0BCI= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= , Geert Uytterhoeven , Thierry Reding , Sasha Levin Subject: [PATCH 5.15 1358/2214] pwm: renesas-tpu: Rename variables to match the usual naming Date: Wed, 18 Nov 2026 15:50:34 +0100 Message-ID: <20261118150105.740359420@linuxfoundation.org> X-Mailer: git-send-email 2.56.0 In-Reply-To: <20261118150009.797899913@linuxfoundation.org> References: <20261118150009.797899913@linuxfoundation.org> User-Agent: quilt/0.69 X-stable: review X-Patchwork-Hint: ignore X-Mailing-List: patches@lists.linux.dev List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Uwe Kleine-König [ Upstream commit 208ab8676b9c787b4285364fcb52a159f94b861d ] The driver used "pwm" for struct tpu_pwm_device pointers. This name is usually only used for struct pwm_device pointers which this driver calls "_pwm". So rename to the driver data pointers to "tpd" which then allows to drop the underscore from "_pwm". Signed-off-by: Uwe Kleine-König Reviewed-by: Geert Uytterhoeven Signed-off-by: Thierry Reding Stable-dep-of: 62cff15fbf2b ("pwm: renesas-tpu: Fix runtime PM reference leak") Signed-off-by: Sasha Levin --- drivers/pwm/pwm-renesas-tpu.c | 172 +++++++++++++++++----------------- 1 file changed, 86 insertions(+), 86 deletions(-) diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c index 0d2e87132d212..ee56d28e55b8e 100644 --- a/drivers/pwm/pwm-renesas-tpu.c +++ b/drivers/pwm/pwm-renesas-tpu.c @@ -89,71 +89,71 @@ struct tpu_device { #define to_tpu_device(c) container_of(c, struct tpu_device, chip) -static void tpu_pwm_write(struct tpu_pwm_device *pwm, int reg_nr, u16 value) +static void tpu_pwm_write(struct tpu_pwm_device *tpd, int reg_nr, u16 value) { - void __iomem *base = pwm->tpu->base + TPU_CHANNEL_OFFSET - + pwm->channel * TPU_CHANNEL_SIZE; + void __iomem *base = tpd->tpu->base + TPU_CHANNEL_OFFSET + + tpd->channel * TPU_CHANNEL_SIZE; iowrite16(value, base + reg_nr); } -static void tpu_pwm_set_pin(struct tpu_pwm_device *pwm, +static void tpu_pwm_set_pin(struct tpu_pwm_device *tpd, enum tpu_pin_state state) { static const char * const states[] = { "inactive", "PWM", "active" }; - dev_dbg(&pwm->tpu->pdev->dev, "%u: configuring pin as %s\n", - pwm->channel, states[state]); + dev_dbg(&tpd->tpu->pdev->dev, "%u: configuring pin as %s\n", + tpd->channel, states[state]); switch (state) { case TPU_PIN_INACTIVE: - tpu_pwm_write(pwm, TPU_TIORn, - pwm->polarity == PWM_POLARITY_INVERSED ? + tpu_pwm_write(tpd, TPU_TIORn, + tpd->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_1 : TPU_TIOR_IOA_0); break; case TPU_PIN_PWM: - tpu_pwm_write(pwm, TPU_TIORn, - pwm->polarity == PWM_POLARITY_INVERSED ? + tpu_pwm_write(tpd, TPU_TIORn, + tpd->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_0_SET : TPU_TIOR_IOA_1_CLR); break; case TPU_PIN_ACTIVE: - tpu_pwm_write(pwm, TPU_TIORn, - pwm->polarity == PWM_POLARITY_INVERSED ? + tpu_pwm_write(tpd, TPU_TIORn, + tpd->polarity == PWM_POLARITY_INVERSED ? TPU_TIOR_IOA_0 : TPU_TIOR_IOA_1); break; } } -static void tpu_pwm_start_stop(struct tpu_pwm_device *pwm, int start) +static void tpu_pwm_start_stop(struct tpu_pwm_device *tpd, int start) { unsigned long flags; u16 value; - spin_lock_irqsave(&pwm->tpu->lock, flags); - value = ioread16(pwm->tpu->base + TPU_TSTR); + spin_lock_irqsave(&tpd->tpu->lock, flags); + value = ioread16(tpd->tpu->base + TPU_TSTR); if (start) - value |= 1 << pwm->channel; + value |= 1 << tpd->channel; else - value &= ~(1 << pwm->channel); + value &= ~(1 << tpd->channel); - iowrite16(value, pwm->tpu->base + TPU_TSTR); - spin_unlock_irqrestore(&pwm->tpu->lock, flags); + iowrite16(value, tpd->tpu->base + TPU_TSTR); + spin_unlock_irqrestore(&tpd->tpu->lock, flags); } -static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) +static int tpu_pwm_timer_start(struct tpu_pwm_device *tpd) { int ret; - if (!pwm->timer_on) { + if (!tpd->timer_on) { /* Wake up device and enable clock. */ - pm_runtime_get_sync(&pwm->tpu->pdev->dev); - ret = clk_prepare_enable(pwm->tpu->clk); + pm_runtime_get_sync(&tpd->tpu->pdev->dev); + ret = clk_prepare_enable(tpd->tpu->clk); if (ret) { - dev_err(&pwm->tpu->pdev->dev, "cannot enable clock\n"); + dev_err(&tpd->tpu->pdev->dev, "cannot enable clock\n"); return ret; } - pwm->timer_on = true; + tpd->timer_on = true; } /* @@ -161,8 +161,8 @@ static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) * completely. First drive the pin to the inactive state to avoid * glitches. */ - tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); - tpu_pwm_start_stop(pwm, false); + tpu_pwm_set_pin(tpd, TPU_PIN_INACTIVE); + tpu_pwm_start_stop(tpd, false); /* * - Clear TCNT on TGRB match @@ -172,80 +172,80 @@ static int tpu_pwm_timer_start(struct tpu_pwm_device *pwm) * - Output 1 until TGRA, output 0 until TGRB (active high polarity * - PWM mode */ - tpu_pwm_write(pwm, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING | - pwm->prescaler); - tpu_pwm_write(pwm, TPU_TMDRn, TPU_TMDR_MD_PWM); - tpu_pwm_set_pin(pwm, TPU_PIN_PWM); - tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); - tpu_pwm_write(pwm, TPU_TGRBn, pwm->period); + tpu_pwm_write(tpd, TPU_TCRn, TPU_TCR_CCLR_TGRB | TPU_TCR_CKEG_RISING | + tpd->prescaler); + tpu_pwm_write(tpd, TPU_TMDRn, TPU_TMDR_MD_PWM); + tpu_pwm_set_pin(tpd, TPU_PIN_PWM); + tpu_pwm_write(tpd, TPU_TGRAn, tpd->duty); + tpu_pwm_write(tpd, TPU_TGRBn, tpd->period); - dev_dbg(&pwm->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n", - pwm->channel, pwm->duty, pwm->period); + dev_dbg(&tpd->tpu->pdev->dev, "%u: TGRA 0x%04x TGRB 0x%04x\n", + tpd->channel, tpd->duty, tpd->period); /* Start the channel. */ - tpu_pwm_start_stop(pwm, true); + tpu_pwm_start_stop(tpd, true); return 0; } -static void tpu_pwm_timer_stop(struct tpu_pwm_device *pwm) +static void tpu_pwm_timer_stop(struct tpu_pwm_device *tpd) { - if (!pwm->timer_on) + if (!tpd->timer_on) return; /* Disable channel. */ - tpu_pwm_start_stop(pwm, false); + tpu_pwm_start_stop(tpd, false); /* Stop clock and mark device as idle. */ - clk_disable_unprepare(pwm->tpu->clk); - pm_runtime_put(&pwm->tpu->pdev->dev); + clk_disable_unprepare(tpd->tpu->clk); + pm_runtime_put(&tpd->tpu->pdev->dev); - pwm->timer_on = false; + tpd->timer_on = false; } /* ----------------------------------------------------------------------------- * PWM API */ -static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm) +static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { struct tpu_device *tpu = to_tpu_device(chip); - struct tpu_pwm_device *pwm; + struct tpu_pwm_device *tpd; - if (_pwm->hwpwm >= TPU_CHANNEL_MAX) + if (pwm->hwpwm >= TPU_CHANNEL_MAX) return -EINVAL; - pwm = kzalloc(sizeof(*pwm), GFP_KERNEL); - if (pwm == NULL) + tpd = kzalloc(sizeof(*tpd), GFP_KERNEL); + if (tpd == NULL) return -ENOMEM; - pwm->tpu = tpu; - pwm->channel = _pwm->hwpwm; - pwm->polarity = PWM_POLARITY_NORMAL; - pwm->prescaler = 0; - pwm->period = 0; - pwm->duty = 0; + tpd->tpu = tpu; + tpd->channel = pwm->hwpwm; + tpd->polarity = PWM_POLARITY_NORMAL; + tpd->prescaler = 0; + tpd->period = 0; + tpd->duty = 0; - pwm->timer_on = false; + tpd->timer_on = false; - pwm_set_chip_data(_pwm, pwm); + pwm_set_chip_data(pwm, tpd); return 0; } -static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *_pwm) +static void tpu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { - struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm); - tpu_pwm_timer_stop(pwm); - kfree(pwm); + tpu_pwm_timer_stop(tpd); + kfree(tpd); } -static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, +static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns, bool enabled) { static const unsigned int prescalers[] = { 1, 4, 16, 64 }; - struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm); struct tpu_device *tpu = to_tpu_device(chip); unsigned int prescaler; bool duty_only = false; @@ -285,29 +285,29 @@ static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, "rate %u, prescaler %u, period %u, duty %u\n", clk_rate, prescalers[prescaler], period, duty); - if (pwm->prescaler == prescaler && pwm->period == period) + if (tpd->prescaler == prescaler && tpd->period == period) duty_only = true; - pwm->prescaler = prescaler; - pwm->period = period; - pwm->duty = duty; + tpd->prescaler = prescaler; + tpd->period = period; + tpd->duty = duty; /* If the channel is disabled we're done. */ if (!enabled) return 0; - if (duty_only && pwm->timer_on) { + if (duty_only && tpd->timer_on) { /* * If only the duty cycle changed and the timer is already * running, there's no need to reconfigure it completely, Just * modify the duty cycle. */ - tpu_pwm_write(pwm, TPU_TGRAn, pwm->duty); - dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", pwm->channel, - pwm->duty); + tpu_pwm_write(tpd, TPU_TGRAn, tpd->duty); + dev_dbg(&tpu->pdev->dev, "%u: TGRA 0x%04x\n", tpd->channel, + tpd->duty); } else { /* Otherwise perform a full reconfiguration. */ - ret = tpu_pwm_timer_start(pwm); + ret = tpu_pwm_timer_start(tpd); if (ret < 0) return ret; } @@ -317,29 +317,29 @@ static int tpu_pwm_config(struct pwm_chip *chip, struct pwm_device *_pwm, * To avoid running the timer when not strictly required, handle * 0% and 100% duty cycles as fixed levels and stop the timer. */ - tpu_pwm_set_pin(pwm, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); - tpu_pwm_timer_stop(pwm); + tpu_pwm_set_pin(tpd, duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); + tpu_pwm_timer_stop(tpd); } return 0; } -static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *_pwm, +static int tpu_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity) { - struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm); - pwm->polarity = polarity; + tpd->polarity = polarity; return 0; } -static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm) +static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { - struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm); int ret; - ret = tpu_pwm_timer_start(pwm); + ret = tpu_pwm_timer_start(tpd); if (ret < 0) return ret; @@ -347,23 +347,23 @@ static int tpu_pwm_enable(struct pwm_chip *chip, struct pwm_device *_pwm) * To avoid running the timer when not strictly required, handle 0% and * 100% duty cycles as fixed levels and stop the timer. */ - if (pwm->duty == 0 || pwm->duty == pwm->period) { - tpu_pwm_set_pin(pwm, pwm->duty ? + if (tpd->duty == 0 || tpd->duty == tpd->period) { + tpu_pwm_set_pin(tpd, tpd->duty ? TPU_PIN_ACTIVE : TPU_PIN_INACTIVE); - tpu_pwm_timer_stop(pwm); + tpu_pwm_timer_stop(tpd); } return 0; } -static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *_pwm) +static void tpu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { - struct tpu_pwm_device *pwm = pwm_get_chip_data(_pwm); + struct tpu_pwm_device *tpd = pwm_get_chip_data(pwm); /* The timer must be running to modify the pin output configuration. */ - tpu_pwm_timer_start(pwm); - tpu_pwm_set_pin(pwm, TPU_PIN_INACTIVE); - tpu_pwm_timer_stop(pwm); + tpu_pwm_timer_start(tpd); + tpu_pwm_set_pin(tpd, TPU_PIN_INACTIVE); + tpu_pwm_timer_stop(tpd); } static int tpu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, -- 2.53.0