From: Fabio Estevam <fabioestevam@yahoo.com>
Date: Wed, 14 May 2008 13:53:28 -0700 (PDT)
Subject: [U-Boot-Users] Loading a kernel on MX31ADS using U-boot
In-Reply-To: <482A8FFD.1070102@tqs.de>
Message-ID: <209131.47056.qm@web51011.mail.re2.yahoo.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Jens,

Have you tried to pass the "jtag=on" option into the kernel command line?

Regards,

Fabio Estevam

--- On Wed, 5/14/08, Jens Gehrlein <sew_s@tqs.de> wrote:

> From: Jens Gehrlein <sew_s@tqs.de>
> Subject: Re: [U-Boot-Users] Loading a kernel on MX31ADS using U-boot
> To: "Guennadi Liakhovetski" <g.liakhovetski@gmx.de>
> Cc: u-boot-users at lists.sourceforge.net
> Date: Wednesday, May 14, 2008, 4:08 AM
> Hi Guennadi,
> 
> Guennadi Liakhovetski schrieb:
> 
> ...
> 
> Apart from that, verify that your console=
> > command line parameter is correct, your machine ID
> matches, and that you 
> > don't have a jtag debugger like bdi2000 connected
> when you're trying to 
> > boot.
> 
> I have the same problem on our board: I don't see the
> console outputs if 
> the BDI2000 cable is connected to the target, although the
> BDI is in 
> mode "reset run". Do have an idea why?
> 
> Best Regards,
> Jens
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft 
> Defy all challenges. Microsoft(R) Visual Studio 2008. 
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users