From: Sven Eckelmann Subject: ARM: dts: qcom: IPQ4019 DK04.1 abd DK07.1 DTSI Date: Tue, 12 Dec 2017 10:08:25 +0100 Message-ID: <2173291.qgT9lyRsIB@bentobox> Mime-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1580217.SRfALV4rCu"; micalg="pgp-sha512"; protocol="application/pgp-signature" Return-path: Received: from mail-wm0-f67.google.com ([74.125.82.67]:36967 "EHLO mail-wm0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750915AbdLLJI3 (ORCPT ); Tue, 12 Dec 2017 04:08:29 -0500 Received: by mail-wm0-f67.google.com with SMTP id f140so18850537wmd.2 for ; Tue, 12 Dec 2017 01:08:28 -0800 (PST) Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: linux-arm-msm@vger.kernel.org Cc: simon.wunderlich@openmesh.com, Varadarajan Narayanan , Andy Gross , David Brown , Yifeng Tu , Ram Chandra Jangir --nextPart1580217.SRfALV4rCu Content-Type: multipart/mixed; boundary="nextPart4313199.vXW5xW1kM5" Content-Transfer-Encoding: 7Bit This is a multi-part message in MIME format. --nextPart4313199.vXW5xW1kM5 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Hi, I am currently working on two IPQ401x boards. One is based on the DK04.1 and the other one is DK07.1 based. I've used the qcom-ipq4019-ap.dk04.1.dtsi from LEDE for the first board [1]. This seemed to work relatively well for me. But I was confused that it is still not upstreamed by QCA to Linux. This is rather odd because QCA promised some years ago to have full upstream support for the Dakota family in some months (which is still not on the horizon). Is it planned by QCA to get the patches from Matthew McClintock (and others) upstream? The next board was an DK07.1. I couldn't find any official DTSI for upstream Linux. And the ones from the QCA SDK [1] are not compatible and quite confusing. For example, it doesn't provide spi_0* (but spi_1) - beside all boards only using spi_0*. I have therefore started (for my own project) to write an own one with the infos I got from "my" board. But it is not actually an DK07.1 and I have no documentation for the new board or the DK07.1-C* - so I might be wrong about a couple of things. Is QCA planning to upstream official support (DTSI + DTS) for the DK07.1-C1 and DK07.2-C2 board? Kind regards, Sven [1] https://git.lede-project.org/?p=source.git;a=blob;f=target/linux/ipq806x/patches-4.9/0026-dts-ipq4019-Add-support-for-IPQ4019-DK04-board.patch;h=de0ea8e89a8776812de0d1e6547d05b3f10f6dee;hb=b8220883fd8fa209dae71def9b6d2a7656bca8bb [2] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/tree/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi?h=NHSS.QSDK.6.1.r1&id=0b51d4277668f64173a87c9f39f8099e873f8780 --nextPart4313199.vXW5xW1kM5 Content-Disposition: attachment; filename="qcom-ipq4019-ap.dk07.1.dtsi" Content-Transfer-Encoding: 7Bit Content-Type: text/x-csrc; charset="UTF-8"; name="qcom-ipq4019-ap.dk07.1.dtsi" /* Copyright (c) 2015, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ #include "qcom-ipq4019.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1"; compatible = "qcom,ipq4019"; clocks { xo: xo { compatible = "fixed-clock"; clock-frequency = <48000000>; #clock-cells = <0>; }; }; soc { timer { compatible = "arm,armv7-timer"; interrupts = <1 2 0xf08>, <1 3 0xf08>, <1 4 0xf08>, <1 1 0xf08>; clock-frequency = <48000000>; }; pinctrl@0x01000000 { serial_0_pins: serial_pinmux { mux { pins = "gpio16", "gpio17"; function = "blsp_uart0"; bias-disable; }; }; spi_0_pins: spi_0_pinmux { pinmux { function = "blsp_spi0"; pins = "gpio13", "gpio14", "gpio15"; }; pinmux_cs { function = "gpio"; pins = "gpio12"; }; pinconf { pins = "gpio13", "gpio14", "gpio15"; drive-strength = <12>; bias-disable; }; pinconf_cs { pins = "gpio12"; drive-strength = <2>; bias-disable; output-high; }; }; i2c_0_pins: i2c_0_pinmux { pinmux { function = "blsp_i2c0"; pins = "gpio20", "gpio21"; }; pinconf { pins = "gpio20", "gpio21"; drive-strength = <16>; bias-disable; }; }; mdio_pins: mdio_pinmux { mux_1 { pins = "gpio6"; function = "mdio0"; bias-bus-hold; }; mux_2 { pins = "gpio7"; function = "mdc"; bias-bus-hold; }; }; }; blsp_dma: dma@7884000 { status = "ok"; }; spi_0: spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "ok"; cs-gpios = <&tlmm 12 0>; mx25l25635e@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; compatible = "mx25l25635e"; spi-max-frequency = <24000000>; }; }; i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "ok"; }; serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; status = "ok"; }; usb3_ss_phy: ssphy@9a000 { status = "ok"; }; usb3_hs_phy: hsphy@a6000 { status = "ok"; }; usb3: usb3@8af8800 { status = "ok"; }; usb2_hs_phy: hsphy@a8000 { status = "ok"; }; usb2: usb2@60f8800 { status = "ok"; }; cryptobam: dma@8e04000 { status = "ok"; }; crypto@8e3a000 { status = "ok"; }; watchdog@b017000 { status = "ok"; }; mdio@90000 { status = "ok"; pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; phy-reset-gpio = <&tlmm 41 0>; bias-disable; }; ess-switch@c000000 { status = "ok"; switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */ switch_initvlas = < 0x0007c 0x54 /* PORT0_STATUS */ >; }; ess-psgmii@98000 { status = "ok"; }; edma@c080000 { status = "ok"; }; wifi@a000000 { status = "ok"; }; wifi@a800000 { status = "ok"; }; qpic_bam: dma@7984000 { status = "ok"; }; nand: qpic-nand@79b0000 { status = "ok"; }; }; }; --nextPart4313199.vXW5xW1kM5-- --nextPart1580217.SRfALV4rCu Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part. Content-Transfer-Encoding: 7Bit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEF10rh2Elc9zjMuACXYcKB8Eme0YFAlovnIkACgkQXYcKB8Em e0awlg//ZTg/7GI8hiBXv/JD7Txo1YR4sf4YzPA7dFFaNZP6gVFdbV5SubNc3miZ sEfXNJecpla5uv/GMrTSKfXF9hp6yqnl/il1LOIr3pPVp9o6GQ1XEUX2IgF13uHQ S3Tul8DVqZsB79UP5NSxtFqiUqx8EOa18ZP2W8OSFer9+T8UUfOLZIPt7QsQ5o95 c+0+W7hxa3tL4qRUgi0KbtxIMWluanMVa9GC2nQCaSq0SeolMW9SVYGlabTe+Jwn 7TBPXXQyBQT4Ce7k1dRkxkfdnpVWd3XJWENt/wxfR+1/C8HHYHbttLO65yJsH3no /pdMQMCLJuIJt5Pu0JTUF5EDRdzzxD/nArb2DwKO1JSJ97Zh/TLm94X+YzgbGF5I nPx5vwDIFJlVGWhMt4TyH5XYbFQr7ri4ExPIuB1SRSIVK8/m/eS64cPLBx7h6QhF Nn86/N3T6ZnYFc72Fg0ptpBf9+MLGxgLGKqgefd1LORgVgh5NpI0lmsUwoMB9Yau RV8CIcD6afETwP1QBE4dEbcpCclBTvTgDm5YZK1L+6nMDjOzVV3hBDcC/0vx5H/O WbfWfmVoTkgyq6uk9B4V71Dilm341N2YlH/MXEGvIXHt9FFyX/js24LO/0Ht8U0/ Hd8uaBQApU5W8SKxeR+ulRVKKqjlC7IAd7T9xyZgjEpY7le+v2s= =DR0A -----END PGP SIGNATURE----- --nextPart1580217.SRfALV4rCu--