From: Eugen.Hristev at microchip.com Date: Fri, 5 Apr 2019 06:39:54 +0000 Subject: [U-Boot] [PATCH 10/13 v5] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary In-Reply-To: <20190403132450.12198-1-sr@denx.de> References: <20190403132450.12198-1-sr@denx.de> Message-ID: <24cde35e-d475-8a72-70a3-9899cb44cc8d@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de On 03.04.2019 16:24, Stefan Roese wrote: > This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that > shall be used to generate the combined SPL + U-Boot image. The default > value is the current value "spl/u-boot-spl.bin". >=20 > This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets > which use SPL NAND support (boot from NAND). For these build targets the > combined image "u-boot-with-spl.bin" is now automatically generated and > can be programmed into NAND as one single image (vs. SPL image and U-Boot > as 2 separate images). >=20 > Signed-off-by: Stefan Roese > Cc: Heiko Schocher > Cc: Andreas Bie=C3=9Fmann > Cc: Eugen Hristev Applied this whole series to u-boot-atmel/next Thanks !