From: Jan Niggemann Subject: i915 / 3.15 intermittently boots into blank screeen Date: Thu, 17 Jul 2014 22:31:30 +0200 Message-ID: <259d8edaa5c5afa4628a33d2f2689d04@hz6.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from d119a3.x-mailer.de (d119a3.x-mailer.de [212.162.53.143]) by gabe.freedesktop.org (Postfix) with ESMTP id A03786E6C6 for ; Thu, 17 Jul 2014 14:06:47 -0700 (PDT) Received: from [127.0.0.1] (helo=hz6.de) by d119.x-mailer.de with esmtp (Exim 4.63) (envelope-from ) id 1X7sKw-0003wI-KT for intel-gfx@lists.freedesktop.org; Thu, 17 Jul 2014 22:31:30 +0200 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: intel-gfx-bounces@lists.freedesktop.org Sender: "Intel-gfx" To: Intel Graphics Development List-Id: intel-gfx@lists.freedesktop.org Hi list, you were very helpful to nail down the interrupt storm issue a year ago, I hope we can track this down, too. I'm experiencing an issue with 3.15.5 on my Lenovo T400: When my machine boots, I can see some of the boot messages flying by (quite fast because the machine has a SSD). On a usual boot, the screen would go blank with the backlight off, come back on and other boot messages are visible in a different resolution. Finally the screen flickers once and shows the GDM login. Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the first mode change doesn't occur, resulting in a black screen with backlight on. The system is entirely unresponsive and I can only press the power button until to switch it off. This happens with my custom built kernel 3.15.5 but not with the Debian standard kernel 3.2.0 and IIRC neither with my custom built 3.14 kernels. Would a drm debug log help and if so, what kernel parameters should I use to generate it? System environment Lenovo T400, GM45 Express Chipset, custom-built kernel 3.15.5 on Debian 7.5 /32bit, built-in LCD, issue happens 3 boots out of 4. Best regards Jan