From: Michael Heimpold Date: Thu, 02 May 2013 23:45:32 +0200 Subject: [U-Boot] [PATCH v2 2/8] mxs: Fix PULLUP/NOPULL definitions In-Reply-To: References: <1367503462-24742-1-git-send-email-fabio.estevam@freescale.com> <1446330.r0MTktvcxW@kerker> Message-ID: <2622342.nMkbFGTyBL@kerker> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, > mx23 does not have the "Set this bit to one to _enable_ the internal > pullup" option. Hm, in the RM for i.MX233, page 1480 and above (http://cache.freescale.com/files/dsp/doc/ref_manual/IMX23RM.pdf) I can only find definitions like "Set this bit to one to _disable_ the internal pad keeper and _enable_ the internal pull up resistor..." or for EMI pads at bank 3 "Set this bit to one to _disable_ the internal keeper" (without a note about pull ups). Could you please link me to your reference where the reverse definition comes from? Best regards, Michael