From: Avinash Vijayvergia Date: Thu, 15 May 2008 14:48:06 -0700 (PDT) Subject: [U-Boot-Users] 16MB ram in at91sam9260ek Message-ID: <264785.21429.qm@web39506.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Seniors I have two questions: 1. I have a at91sam9260ek eval board which has got 64MB SDRAM. My u-boot works fine and the map file shows me symbols starting from 0x23F00000. This is what I expected as the include/configs/at91sam9260ek.h has #define CONFIG_LOAD_ADDR 0x23f00000 . I have another similar board but with the SDRAM as 16MB. I have changed the CONFIG_LOAD_ADDR to 0x20f00000 but still the mapfile shows the text starting at 0x23f00000. Can you tell me what are the changes I need to make to change the starting location? 2. In this board there are two dataflashes. One is dataflash card on SPI0 CS0, other is a chip dataflash on SPI0 CS1. When I try to work on dataflash card it still stores the u-boot environment variables on chip dataflash. I rather want it on df card on SPI0 CS0. What do I need to change?Thanks for reading it and helping me. Regards Avinash -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20080515/1e243c29/attachment.htm