From: hjj Date: Sun, 2 Nov 2008 11:34:28 +0800 (CST) Subject: [U-Boot] K9G8G08UM u-boot 1.1.6 saveenv Message-ID: <27404460.332741225596868741.JavaMail.coremail@bj126app87.126.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi,every one ,i met a question with u-boot 1.1.6 and nand flash K9G8G08UM? when i do saveenv, it can save into ram,but when i reset ,it resets the default! following is u-boot information: U-Boot 1.1.6 (Nov 2 2008 - 10:54:43) for SMDK6400 CPU: S3C6400 at 533MHz Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode) Board: SMDK6400 DRAM: 128 MB Flash: 0 kB NAND: 1024 MB *** Warning - bad CRC or NAND, using default environment "*** Warning - bad CRC or NAND, using default environment" this is the main question! i hope i can get someone help,thanks very much!