From: bugtrack@alsa-project.org Subject: [ALSA - utils 0001326]: ISAPNP cards (opl3sa2 in particular) are not detected properly on 2.6 kernels Date: Thu, 11 Aug 2005 00:24:30 +0200 Message-ID: <28a9b9221cde938148d510daf84ded5d@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id B1987211 for ; Thu, 11 Aug 2005 00:24:30 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: ahaning Assigned To: perex ====================================================================== Project: ALSA - utils Issue ID: 1326 Category: alsaconf Reproducibility: always Severity: major Priority: normal Status: assigned ====================================================================== Date Submitted: 08-10-2005 03:39 CEST Last Modified: 08-11-2005 00:24 CEST ====================================================================== Summary: ISAPNP cards (opl3sa2 in particular) are not detected properly on 2.6 kernels Description: When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings are incorrectly detected by alsaconf from alsa-utils. For example, the default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings to that, then the card will make sound (after touching the mixer while playing audio). According to perex (author of the opl3sa2 driver): "The alsaconf tries to gather free resources (irq/dma/ports) from the /proc filesystem. It might be extended to gather this information also from /sys filesystem." ====================================================================== Relationships ID Summary ---------------------------------------------------------------------- related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails... ====================================================================== ---------------------------------------------------------------------- ahaning - 08-10-05 14:55 ---------------------------------------------------------------------- I tried the above alsaconf. The IRQ (irq=11) is now selected correctly. However, I *think* dma1=5 and dma2=3 are incorrect. I'm starting to doubt this now since I did mess with the BIOS settings recently. I'll check again when I have local access to the machine. Thanks. ---------------------------------------------------------------------- ahaning - 08-11-05 00:24 ---------------------------------------------------------------------- Well, I'm going to guess that last time, my system was in some odd state. Here are the BIOS settings for my card (I had it set them to the defaults): PnP = On I/O = 220H-22FH MPU-401 I/O = 330H - 333H IRQ = 11 DMA 1 = CH0 WAVE 2 DMA = CH1 When I run the above alsaconf and have it bruteforce detect my card, it produces the following /etc/modprobe.conf: # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF version 1.0.9a --- alias snd-card-0 snd-opl3sa2 alias sound-slot-0 snd-opl3sa2 options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x370 wss_port=0x530 isapnp=0 dma1=1 dma2=0 irq=5 # --- END: Generated by ALSACONF, do not edit. --- Also, when it is doing the detection, I get the following badness in dmesg: pnp: the driver 'opl3sa2' has been registered pnp: the driver 'opl3sa2' has been unregistered kobject_register failed for snd_generic_pm (-17) [] kobject_register+0x44/0x70 [] bus_add_driver+0x57/0xd0 [] snd_generic_device_register+0x24/0xa0 [snd] [] snd_card_set_generic_pm_callback+0x13/0x60 [snd] [] snd_cs4231_create+0x1f5/0x380 [snd_cs4231_lib] [] snd_cs4231_pm_suspend+0x0/0x30 [snd_cs4231_lib] [] snd_cs4231_pm_resume+0x0/0x30 [snd_cs4231_lib] [] snd_opl3sa2_probe+0x227/0x520 [snd_opl3sa2] [] alsa_card_opl3sa2_init+0x8d/0x97 [snd_opl3sa2] [] sys_init_module+0x1f7/0x220 [] syscall_call+0x7/0xb kobject_register failed for snd_generic_pm (-17) [] kobject_register+0x44/0x70 [] bus_add_driver+0x57/0xd0 [] snd_generic_device_register+0x24/0xa0 [snd] [] snd_card_set_generic_pm_callback+0x13/0x60 [snd] [] snd_opl3sa2_probe+0x35b/0x520 [snd_opl3sa2] [] snd_opl3sa2_suspend+0x0/0x50 [snd_opl3sa2] [] snd_opl3sa2_resume+0x0/0x90 [snd_opl3sa2] [] alsa_card_opl3sa2_init+0x8d/0x97 [snd_opl3sa2] [] sys_init_module+0x1f7/0x220 [] syscall_call+0x7/0xb pnp: the driver 'opl3sa2' has been registered Occasionally, I get a lockup when my system goes to reboot. The drives are all un/re-mounted and everything's shut down, but there's an error like the above. HTH and thanks. Issue History Date Modified Username Field Change ====================================================================== 08-10-05 03:39 ahaning New Issue 08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but it's not distribution-specific) 08-10-05 03:39 ahaning Kernel Version => 2.6.12.2 08-10-05 13:26 perex Status new => assigned 08-10-05 13:26 perex Assigned To => perex 08-10-05 13:26 perex File Added: alsaconf 08-10-05 13:28 perex Note Added: 0005747 08-10-05 13:29 perex Project ALSA - driver => ALSA - utils 08-10-05 13:30 perex Relationship added related to 0000879 08-10-05 13:31 perex Category 1_OTHERS => alsaconf 08-10-05 14:55 ahaning Note Added: 0005748 08-11-05 00:24 ahaning Note Added: 0005752 ====================================================================== ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf