From: Joris Offouga Date: Fri, 26 Apr 2019 14:46:51 +0200 Subject: [U-Boot] [PATCH] pico-imx7d: README: Adjust the binary name after DM conversion In-Reply-To: <20190426123623.16893-1-festevam@gmail.com> References: <20190426123623.16893-1-festevam@gmail.com> Message-ID: <2faffcc5-071f-b015-bc35-84bc8016cab9@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de Le 26/04/2019 à 14:36, Fabio Estevam a écrit : > After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, > so fix the README file accordingly. > > Signed-off-by: Fabio Estevam > --- > board/technexion/pico-imx7d/README | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README > index f21d8301cb..6aa0d25af5 100644 > --- a/board/technexion/pico-imx7d/README > +++ b/board/technexion/pico-imx7d/README > @@ -11,7 +11,7 @@ $ make mrproper > $ make pico-imx7d_defconfig > $ make > > -This generates the SPL and u-boot.img binaries. > +This generates the SPL and u-boot-dtb.img binaries. > > 1. Loading U-Boot via USB Serial Download Protocol > > @@ -32,15 +32,15 @@ to use an externally powered USB hub between the board and the host computer. > > Open a terminal program such as minicom. > > -Copy SPL and u-boot.img to the imx_usb_loader folder. > +Copy SPL and u-boot-dtb.img to the imx_usb_loader folder. > > Load the SPL binary via USB: > > $ sudo ./imx_usb SPL > > -Load the u-boot.img binary via USB: > +Load the u-boot-dtb.img binary via USB: > > -$ sudo ./imx_usb u-boot.img > +$ sudo ./imx_usb u-boot-dtb.img > > Then U-Boot starts and its messages appear in the console program. > > @@ -55,11 +55,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool: > > => dfu 0 mmc 0 > > -Flash SPL and u-boot.img into the eMMC running the following commands on a PC: > +Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC: > > $ sudo dfu-util -D SPL -a spl > > -$ sudo dfu-util -D u-boot.img -a u-boot > +$ sudo dfu-util -D u-boot-dtb.img -a u-boot > > Remove power from the pico board. > Acked-by: Joris Offouga