From: hong zhang Subject: Re: asoc: no valid backend routes for PCM: SDP4430 Media Date: Tue, 7 Jun 2011 12:59:10 -0700 (PDT) Message-ID: <307164.60382.qm@web161713.mail.bf1.yahoo.com> References: <4DEDE38B.2040408@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from nm3-vm0.bullet.mail.bf1.yahoo.com (nm3-vm0.bullet.mail.bf1.yahoo.com [98.139.212.154]) by alsa0.perex.cz (Postfix) with SMTP id CBE1A245A9 for ; Tue, 7 Jun 2011 21:59:12 +0200 (CEST) In-Reply-To: <4DEDE38B.2040408@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org Liam, Actually, I could not prove DMIC on OMAP4 blaze board is working in both ke= rnel 2.6.35 and 2.6.38 using arecord and gstreamer-alsa. In 2.6.35, arecord returns 44 bytes with read error In 2.6.38, arecord collects native data. Gstreamer-alsa could not get voice after turning off analog captures using = amixer. = Any information regarding DMIC on OMAP4? I see people send DMIC patch to 2.= 6.38. Please advise. ---henry --- On Tue, 6/7/11, Liam Girdwood wrote: > From: Liam Girdwood > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 = Media > To: "hong zhang" > Cc: "alsa-devel@alsa-project.org" > Date: Tuesday, June 7, 2011, 3:38 AM > On 07/06/11 01:13, hong zhang wrote: > > List, > > = > > After capturing data from DMIC on OMAP4 blaze board > with kernel 2.6.38 and save wav data to 38.wav. > > = > > But aplay complains "no valid backend routes". See > following, > > = > > $aplay -f dat 38.wav = > > [=A0 157.167724] asoc: no valid backend routes for > PCM: SDP4430 Media > > aplay: main:654: audio open error: Invalid argument > > = > = > This means you have not configured an audio route for > playback (i.e. the audio is not routed anywhere from pcm > hw:0,0). Use alsamixer and configure the kcontrols to define > the audio path. The kcontrol mappings to audio paths are > detailed here for OMAP4 :- > = > http://omappedia.org/wiki/Audio_Drive_Arch > = > Liam > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > =