From: bugtrack@alsa-project.org Subject: [ALSA - driver 0000839]: No AC3/DTS via SPDIF on Intel 82801DB-ICH4 with CS4299 Date: Wed, 22 Jun 2005 18:58:57 +0200 Message-ID: <331328c0296dd8387b0af1955b6bcfe1@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id F10341F8 for ; Wed, 22 Jun 2005 18:58:57 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: Mimosius Assigned To: ====================================================================== Project: ALSA - driver Issue ID: 839 Category: PCI - intel8x0 Reproducibility: always Severity: minor Priority: normal Status: new Distribution: SuSE 9.2 Kernel Version: 2.6.8-24.10 + 2.6.10 ====================================================================== Date Submitted: 01-21-2005 03:12 CET Last Modified: 06-22-2005 18:58 CEST ====================================================================== Summary: No AC3/DTS via SPDIF on Intel 82801DB-ICH4 with CS4299 Description: Audio-mode via SPDIF works fine but I can't get any non-audio passthru working. Using 'ac3play -C test.ac3' SPDIF output is set to AES0=0x2 AES1=0x82 AES2=0x0 AES3=0x2 and the PCM indicator on external decoder turns off, but there seems to arrive no decodeable signal on receiver side. There are no errors or warnings after loading soundrivers and there are no other soundcards plugged in (notebook). here are some system informations: # cat /etc/modprobe.d/sound alias snd-card-0 snd-intel8x0 options snd-ac97-codec options snd-intel8x0 enable=1 index=0 # cat /proc/asound/pcm' 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 # cat /proc/asound/card0/codec97#0/ac97#0-0' (while playing ac3 using ac3dec -C) 0-0/0: Cirrus Logic CS4299 rev 4 Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Crystal Semi 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : Mic Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 AMAP DSA=0 VRA Extended status : VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer Non-audio Category=0x2 Generation=1 Rate=48kHz Enabled # cat /proc/asound/card0/codec97#0/ac97#0-0+regs (while playing ac3 using ac3dec -C) 0:00 = 1990 0:02 = 3f3f 0:04 = 9f1f 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 8000 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 8000 0:1a = 0606 0:1c = 0f0f 0:1e = 0000 0:20 = 0200 0:22 = 0000 0:24 = 0000 0:26 = 800f 0:28 = 0201 0:2a = 0001 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0404 0:5c = 0000 0:5e = 0080 0:60 = 0022 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 8826 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0000 0:76 = 0000 0:78 = 003f 0:7a = 0000 0:7c = 4352 0:7e = 5934 ====================================================================== ---------------------------------------------------------------------- tiwai - 06-22-05 17:56 ---------------------------------------------------------------------- Well, two possibilities can be counted: 1. the SPDIF signal is sent through a wrong channel or recoded somehow wrongly, so the non-audio data is broken 2. the SPDIF non-audio status bit is not set. Some receivers are so sentive that they don't accept SPDIF signals with that. The latter happens more often, but I'm not sure which one (or both?) in your case. The former one would be either: - you passed the data through the normal DMA via slot3/4, or - wrong sample rate, not supported by the codec, or - any unknown reason? ---------------------------------------------------------------------- Mimosius - 06-22-05 18:58 ---------------------------------------------------------------------- Hi tiwai, >Well, two possibilities can be counted: >1. the SPDIF signal is sent through a wrong channel or recoded somehow >wrongly, so the non-audio data is broken >2. the SPDIF non-audio status bit is not set. Some receivers are so sentive >that they don't accept SPDIF signals with that. I tried to play an AC3-file with mplayer using alsa-driver with hwac3 output and "ac3dec -C". Each test gives the same result, the value in register 0x68 changed from 0x8824 to 0x8826, which shows that the non-audio bit was set correctly. >The latter happens more often, but I'm not sure which one (or both?) in your case. The former one would be either: > - you passed the data through the normal DMA via slot3/4, or The AC Mode Control Register 0x5e is set to 0x80 which indicates slot assignment L3/R4 (Page 30 and Crystals Documentation). Maybe the DDM bit should also be set? from Documentation: "DDM: (DAC direct mode) This bit controls the source to the line and alternate line output drivers. When 'set' the L/R DACs directly drive the line and alternate line outputs by bypassing the audio mixer. When 'clear' the audio mixer is the source for the line and alternate line outputs." > - wrong sample rate, not supported by the codec, or PCM Front Rate Register 0x2c is set to 0xbb80 (48KHz) As you said, there are maybe some recodings of the non-audio data. Is there any way to grab these data? (I still have a desktop system using a Hoontech with YMF754 and S/PDIF in.) Is there a simple way to grab the AC97 registers of the Win32 Driver? Regards Glen Issue History Date Modified Username Field Change ====================================================================== 01-21-05 03:12 Mimosius New Issue 01-21-05 03:12 Mimosius Distribution => SuSE 9.2 01-21-05 03:12 Mimosius Kernel Version => 2.6.8-24.10 + 2.6.10 01-21-05 03:13 Mimosius Issue Monitored: Mimosius 03-01-05 11:31 Mimosius Note Added: 0003758 03-15-05 21:37 Mimosius Note Added: 0003917 03-16-05 12:47 tiwai Note Added: 0003945 03-16-05 12:47 tiwai Note Added: 0003946 03-17-05 01:00 Mimosius Note Added: 0003975 06-22-05 13:08 Mimosius Note Added: 0005132 06-22-05 17:56 tiwai Note Added: 0005137 06-22-05 18:58 Mimosius Note Added: 0005143 ====================================================================== ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click