From: Vostrikov Andrey Subject: Re: [RFC][PATCH] net: arinc429: Add ARINC-429 stack Date: Wed, 4 Nov 2015 18:03:16 +0300 Message-ID: <338664525.20151104180316@cogentembedded.com> References: <1446419775-5215-1-git-send-email-marex@denx.de> <201511032243.03029.marex@denx.de> <201511041454.16413.marex@denx.de> Reply-To: Vostrikov Andrey Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: Aleksander Morgado , Oliver Hartkopp , "Marc Kleine-Budde" , "netdev@vger.kernel.org" , "David S. Miller" , Wolfgang Grandegger , Andrew Lunn To: Marek Vasut Return-path: Received: from mail-lb0-f173.google.com ([209.85.217.173]:33886 "EHLO mail-lb0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030363AbbKDPDa (ORCPT ); Wed, 4 Nov 2015 10:03:30 -0500 Received: by lbbwb3 with SMTP id wb3so18204116lbb.1 for ; Wed, 04 Nov 2015 07:03:28 -0800 (PST) In-Reply-To: <201511041454.16413.marex@denx.de> Sender: netdev-owner@vger.kernel.org List-ID: Hi, Marek. > About the parity -- can we add some flag into the datagram to indicate we > want hardware to calculate the parity for that particular datagram for us? > And we'd also need to indicate what type of parity. I dunno if this is worth > the hassle. This is HW configuration property, it does not belong to datagram. Also for TX channels, parity could be two kinds: odd and even, for RX it is only on/off. Parity is not the only property that needs to be configured in HW, following could be needed as well, - label bit flipping (on or off) - rate change (low / high) - label filters and label priority matching (this could be HoltIC specific) I suppose all these properties are configured only once, at interface initialization. -- Best regards, Andrey Vostrikov