From: John Smith <john.maximus@gmail.com>
Date: Mon, 30 May 2005 05:47:57 -0400
Subject: [U-Boot-Users] uboot - bootargs questions ?
Message-ID: <3634de74050530024766f11de0@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi,
    I am using u-boot to load and boot up my kernel.

    I dont want to use serial port (which will be used for some other
purpose after linux boots up).

    serial port, i want to be used only for entering tftpboot uImage
and bootm commands.
    which i will doing using minicom.

    as soon linux loads itself. the serial port should be free.

    what should i do it to achieve this.


   i set in bootargs console=none.


   after getting unconpressing linux............... message.

   I get no more messages. this is fine. 


  But, linux does not boot up at all. (boot process is not complete).


  When i ping to my target. i get destination unreachable.


  what could be the problem.



Regards,
/J