Message-ID: <39E3162B.CFC2B32B@winqvist.net> Date: Tue, 10 Oct 2000 15:14:19 +0200 From: =?iso-8859-1?Q?J=F6rgen?= Winqvist MIME-Version: 1.0 Subject: Re: [linux-lvm] Compaq diskarray problems References: <39E3008D.A969BC89@winqvist.net> <39E31326.E9AC27C6@HomeDepot.Com> Content-Transfer-Encoding: 8bit Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: Content-Type: text/plain; charset="utf-8" To: JHamilton@Earthling.Net Cc: linux-lvm@msede.com Justin I did try that to begin with. Look further down my posting. Pvcreate complains on the partition type whatever i change it to. It always says it has 0x83. J�rgen Justin Hamilton wrote: > Within fdisk, you need to select option t (to change the type of the > partition) and select 8e for the type. > > Your pvcreate should work just fine after this. > > Justin > > J�rgen Winqvist wrote: > > > > Hi, > > > > I can't pvcreate LUN's on a Compaq raid controller. This LUN is 10 Gb. > > I've compiled 8.0final. > > (I had to comment #include "gnu/types.h" out in liblvm.h). > > > > Greateful for any help. > > > > Regards > > > > J�rgen > > > > Compaq Proliant DL380 with 3 striped disks and 5 LUNs' > > Redhat 7 with 2.4.0-0.26 > > ---------------------------------------------------------------- > > # cat /proc/lvm > > LVM driver version 0.8final (15/02/2000) > > > > Total: 0 VGs 0 PVs 0 LVs (0 LVs open) > > Global: 143 bytes malloced IOP version: 6 5:20:33 active > > ------------------------------------------------------------- > > > > # fdisk /dev/ida/c0d1 > > Command (m for help): p > > Disk /dev/ida/c0d1: 255 heads, 32 sectors, 2510 cylinders > > Units = cylinders of 8160 * 512 bytes > > > > Device Boot Start End Blocks Id System > > > > Command (m for help): q > > # pvcreate /dev/ida/c0d1 > > pvcreate -- invalid partition type 0x83 for "/dev/ida/c0d1" (must be > > 0x8e) > > -------------------------------------------------------------- > > > > I've now added a partition with type LVM > > > > # fdisk /dev/ida/c0d1 > > Command (m for help): p > > Disk /dev/ida/c0d1: 255 heads, 32 sectors, 2510 cylinders > > Units = cylinders of 8160 * 512 bytes > > Device Boot Start End Blocks Id System > > /dev/ida/c0d1p1 1 2510 10240784 8e Linux LVM > > Command (m for help): q > > # pvcreate /dev/ida/c0d1p > > pvcreate -- invalid partition type 0x83 for "/dev/ida/c0d1p1" (must be > > 0x8e) > > -------------------------------------------------------------- > > > > output from dmesg > > > > cpqarray: Device 1000 has been found at 0 8 > > Compaq SMART2 Driver (v 2.4.0) > > Found 1 controller(s) > > cpqarray: Finding drives on ida0 (Integrated Array) > > cpqarray ida/c0d0: blksz=512 nr_blks=20481600 > > cpqarray ida/c0d1: blksz=512 nr_blks=20481600 > > cpqarray ida/c0d2: blksz=512 nr_blks=20481600 > > cpqarray ida/c0d3: blksz=512 nr_blks=20481600 > > cpqarray ida/c0d4: blksz=512 nr_blks=24732960 > > cpqarray: Starting firmware's background processing > > Partition check: > > ida/c0d0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 > > > ida/c0d1: > > ida/c0d2: > > ida/c0d3: > > ida/c0d4: > > ---------------------------------------------------------------