From: pete Subject: Accessing 6 channels on CMI8738 Date: Fri, 15 Feb 2002 17:18:25 +1300 Message-ID: <3C6C8C11.5020904@claudia.dyn.dhs.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi there, I need to output 3 independent stereo streams on my CM8738, but i'm having trouble addressing the card in 'Multi-channel' mode - where I should be able to open the first DAC on the card using 6 channels, and play interleaved data out of the 3 analog stereo outputs. I can get 2-channel mode working - i.e. the front DAC works in simple stereo, and I can access the second pair of channels i.e. 'rear' using hw:0,1, but i can't figure out how to access the last channel pair (center/bass) or how to send interleaved data to them all at the same time, which would be ideal. Can anyone give me some hints or skeleton code that puts the CMI8738 in a suitable mode and outputs a sine wave on all 6-channels? Thanks for your time -Pete _______________________________________________ Alsa-devel mailing list Alsa-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-devel