From: Joern Nettingsmeier Subject: Re: HDSP -- linux CardBus issue: PCMCIA driver works! Date: Sat, 22 Jun 2002 00:29:02 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D13A8AE.F4855D88@folkwang-hochschule.de> References: <20020621190320.GA1029@finnendahl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Orm Finnendahl , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Orm Finnendahl wrote: > = > Hi all, > = > I just wanted to tell you that the PCMCIA card bus interface works > with the hdsp driver and a multiface (I only tested it with aplay and > 2 channels so far, but think it should be possible to get the other > channels to play as well). I first had seemingly similar problems to > the ones posted on this list with my SuSE 7.3 distribution, but > changed to Debian this week. > = > I use the unstable distribution and first had some problems getting > PCMCIA to work. I finally succeeded in the combination of the > kernel-pcmcia-modules-2.4.18-686 and the pcmcia-cs package (It didn't > work with the package pcmcia-modules-2.4.18-686 which gets installed > automatically if you install pcmcia-cs directly, so both packages had > to be purge-removed and then reinstalled with > kernel-pcmcia-modules... first and then the pcmcia-cs package). > = > I had to remove all references to my built-in soundcard from > /etc/modules.conf (and from /etc/modules as I made an entry there as > well) and just did a modprobe snd-hdsp right after system bootup with > all interfaces connected and powered. The red led flashes and turns > off and alsamixer shows the 18 outchannels of the Multiface (I don't > know how to access the input channels yet). you should probably pull in snd-hammerfall-mem as well. do that as early as possible after bootup, to be sure there's still a large enough chunk of memory available. having a second soundcard installed should not be a problem, i've had up to three cards without any hassle: #alsa native options snd-emu10k1 snd_enable=3D1 snd_index=3D0 options snd-ens1371 snd_enable=3D1 snd_index=3D1 options snd snd_cards_limit=3D2 snd_major=3D116 alias snd-card-0 snd-emu10k1 alias snd-card-1 snd-ens1371 post-install snd /usr/sbin/alsactl restore pre-remove snd /usr/sbin/alsactl store post-install snd-seq /usr/bin/sfxload /usr/share/sounds/sf2/8MBGMSFX.SF2 #oss emulation alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-11 snd-mixer-oss alias sound-service-0-12 snd-pcm-oss alias sound-slot-1 snd-card-1 alias sound-service-1-0 snd-mixer-oss alias sound-service-1-1 snd-seq-oss alias sound-service-1-3 snd-pcm-oss alias sound-service-1-8 snd-seq-oss alias sound-service-1-11 snd-mixer-oss alias sound-service-1-12 snd-pcm-oss best, j=F6rn ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/