From: Joern Nettingsmeier Subject: Re: capture buffers on SBLIVE... Date: Sun, 30 Jun 2002 11:05:30 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D1EC9DA.BE535918@folkwang-hochschule.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Fernando Pablo Lopez-Lezcano Cc: "alsa-devel@lists.sourceforge.net" List-Id: alsa-devel@alsa-project.org Fernando Pablo Lopez-Lezcano wrote: > = > > i'm tracking down a nasty problem i have with jack. is there any way = to > > increase the periods-per-hardware-buffer setting on an sblive for > > capture ? jackd refuses to do that, and i wonder whether it's a hardw= are > > limitation. > = > Has to be, apparently the playback and record channels of the sblive ar= e > not symetric. For recording you can only use two periods and that's it > (but for playback you can use more). I assume the alsa driver reflects = the > underlying hardware as usual. ok. i need to know this just for comparison. if i can be sure that no application can get more than 2 periods on capture, i can compare jack and non-jack apps under equal circumstances... = thanks, j=F6rn ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf