From: chuck gelm Subject: Re: ppp0 (urgent) Date: Fri, 19 Jul 2002 10:35:26 -0400 Sender: linux-newbie-owner@vger.kernel.org Message-ID: <3D3823AE.10B50713@gelm.net> References: <20020719102636.12295.qmail@web2.mailbox.hu> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: Korosi Akos Cc: Newbie Hi, Akos: I am a newbie too, but since I didn't see a response from the gurus yet, I'll post some comments. Korosi Akos wrote: > > Hi! > > Ray wrote: > > I don't use kppp and never have ... but assuming it is a fairly > The output of kppp in /var/log/messages was this : > > Jul 19 10:05:41 localhost kernel: hsf_break_ctl: modem does not > presently support sending/receiving BREAK > Jul 19 10:06:11 localhost modprobe: modprobe: Can't locate module ppp0 > Jul 19 10:06:11 localhost modprobe: modprobe: Can't locate module ppp0 pppd.o is a modules ppp0 may not be a module. Are you doing: modprobe pppd ? > Jul 19 10:06:11 localhost pppd[12233]: pppd 2.4.1 started by root, uid 0 > Jul 19 10:06:11 localhost modprobe: modprobe: Can't locate module ppp0 > Jul 19 10:06:11 localhost pppd[12233]: Using interface ppp0 > Jul 19 10:06:11 localhost pppd[12233]: Connect: ppp0 <--> /dev/ttyHSF0 > Jul 19 10:06:11 localhost /etc/hotplug/net.agent: assuming ppp0 is > already up > Jul 19 10:06:41 localhost pppd[12233]: Terminating on signal 15. > Jul 19 10:06:47 localhost pppd[12233]: Connection terminated. > Jul 19 10:06:47 localhost pppd[12233]: Receive serial link is not 8-bit > clean: > Jul 19 10:06:47 localhost pppd[12233]: Problem: all had bit 7 set to 0 This looks like your modem is set for 7 [even|odd|no] parity. You probably need to set 8 bits, no parity, 1 stop bit; "8N1". HTH, Chuck > Jul 19 10:06:47 localhost pppd[12233]: Exit. > Jul 19 10:06:47 localhost /etc/hotplug/net.agent: NET unregister event > not supported > > on 10:06:47 I pulled out the phone cable to cut off the connection, so > those > messages are because of that. > > If this is not enough (and I think it is not), please tell me what other > information should I > tell to you. > > I wonder why is that when I made a dial up connection on the other > macine (with Ethernet card) > there wasn't any problems? > I tought that was because of the Ethernet card, so that is why I thought > that I need one > in this machine too, but if not, than could there be any relation > between ppp0 and Ethernet? > > Now I started to look through pppd and chat, but I don't really know > what I need for a > dial up connection. > When a connection is made with chat and it logged in, and pppd got back > to work, do I need > anything else, or from that I can use Internet with a browser?? > > I will keep on trying with kppp and chat and I will send you all > informations that I > get from log messages. > > Thank you for your help (for now), > Akos > > -------------------------------------------------- > http://www.mailbox.hu - Mert levelezni kell... > > - > To unsubscribe from this list: send the line "unsubscribe linux-newbie" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.linux-learn.org/faqs - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs