From: etienne Subject: hdsp / pcmcia / multiface .... details Date: Thu, 22 Aug 2002 18:04:15 +1000 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3D649AFF.4090005@lalila.net> Reply-To: eyem@lalila.net Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel List-Id: alsa-devel@alsa-project.org Hi all, just thought I should give a few more details on the Hammerfall DSP + multiface behaviour. (aplay works, but cant seem to get multiple channel output) ------------------------------------------------------ modules.conf contains: alias char-major-116 snd alias sound-slot-0 snd-card-0 alias snd-card-0 snd-hdsp options snd-hammerfall_mem snd_enable=1,1 options snd-hdsp snd_id="hdsp" ------------------------------------------------------ I have no asound.conf or .asoundrc files configured ------------------------------------------------------ cat /proc/asound/pcm gives: 00-00: RME Hammerfall DSP (Multiface) : RME Hammerfall DSP (Multiface) : playback 1 : capture 1 ------------------------------------------------------ ls /proc/asound/hdsp gives: hdsp id midi0 midi1 pcm0c pcm0p ------------------------------------------------------ cat /proc/asound/hdsp/hdsp gives: RME Hammerfall DSP (Multiface) (Card #1) Buffers: capture c0e00000 playback c0c00000 IRQ: 11 Registers bus: 0xf5000000 VM: 0xe08d5000 Control register: 0x100905c Status register: 0x12000000 Status2 register: 0xffff0703 FIFO status: 0 MIDI1 Output status: 0xffffff00 MIDI1 Input status: 0xffffff00 MIDI2 Output status: 0xffffff00 MIDI2 Input status: 0xffffff00 Latency: 4096 samples (2 periods of 16384 bytes) Hardware pointer (frames): 0 Passthru: no Line out: on Firmware version: 5 Sync reference: Master/Master (chosen) Sample rate: 0 IEC958 input: Internal IEC958 output: Coaxial & ADAT1 IEC958 quality: Consumer IEC958 emphasis: off IEC958 NonAudio: off IEC958 sample rate: Error flag set ADAT1: No Lock ADAT2: No Lock ------------------------------------------------------ aplay -v sound/orgue1.wav gives: (and only plays in one channel) Playing WAVE 'sound/orgue1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo Plug PCM: Route conversion PCM (sformat=S32_LE) Transformation table: 0 <- 0 1 <- 1 2 <- none 3 <- none 4 <- none 5 <- none 6 <- none 7 <- none 8 <- none 9 <- none 10 <- none 11 <- none 12 <- none 13 <- none 14 <- none 15 <- none 16 <- none 17 <- none Its setup is: stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 44100 exact rate : 44100 (44100/1) msbits : 16 buffer_size : 8192 period_size : 4096 period_time : 92879 tick_time : 10000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 4096 xfer_align : 4096 start_threshold : 8192 stop_threshold : 8192 silence_threshold: 0 silence_size : 0 boundary : 1073741824 Slave: Hardware PCM card 0 'Hammerfall DSP' device 0 subdevice -1 Its setup is: stream : PLAYBACK access : MMAP_NONINTERLEAVED format : S32_LE subformat : STD channels : 18 rate : 44100 exact rate : 44100 (44100/1) msbits : 24 buffer_size : 8192 period_size : 4096 period_time : 92879 tick_time : 10000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 4096 xfer_align : 4096 start_threshold : 8192 stop_threshold : 8192 silence_threshold: 0 silence_size : 0 boundary : 1073741824 Max peak (8192 samples): 08968 (0x2308) ###### 27% Max peak (8192 samples): 09412 (0x24c4) ###### 28% Max peak (8192 samples): 07178 (0x1c0a) ##### 21% Max peak (8192 samples): 01246 (0x04de) # 3% etienne ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390