From: Pieter Palmers Subject: How do I perform non-DMA transfers in an interrupt handler? Date: Fri, 21 Mar 2003 13:01:02 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3E7AFEFE.50901@student.kuleuven.ac.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi all, I face the following problem: The card I'm writing a driver for (SAM9707 based) doesn't support any form of DMA transfer. It requires you to transfer the PCM data through a 'rep outsw' like mechanism. It raises an interrupt when it needs new data. The transfer flow is as follows: 1) allocate buffer on card 2) start playback 3) card raises interrupt 4) transfer block of data in interrupt handler 5) wait for next interrupt -> 4 How do I implement this in ALSA? After reading the 'Writing an ALSA driver' document a few times, I still cannot figure out how to do this. Should I use the copy/silence callbacks? Or can I access the PCM buffer from within the interrupt handler? I'm currently using 'concept' code from Uros Bizjak, and the interrupt handler looks like this: (I removed irrelevant pieces) substream = voice->substream; runtime = substream->runtime; hwoff = runtime->hw_ptr_interrupt; hwbuf = (u16 *) runtime->dma_area; hwbuf += (frames_to_bytes(runtime, hwoff) >> 1); /* word transfer count */ wcount = snd_pcm_lib_period_bytes(substream); wcount >>= 1; /* transfer to/from sam9407 buffers */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) sam->writeData16Burst(sam, hwbuf, wcount); else sam->readData16Burst(sam, hwbuf, wcount); snd_sam9407_command(sam, NULL, SAM_END_XFER, &voice->channel, 1, NULL, 0, -1); /* update hardware pointer mirror */ voice->hwptr = runtime->hw_ptr_interrupt + runtime->period_size; snd_pcm_period_elapsed(substream); But I'm not sure if this is correct. What should I use here? Is there a card driver that I can refer to that uses the same mechanism? Pieter ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf