From: Niklas Werner Subject: USB-Audio strangeness Date: Sat, 22 Mar 2003 14:03:53 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3E7C5F39.4050003@gmx.li> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: "alsa-devel@lists.sourceforge.net" List-Id: alsa-devel@alsa-project.org Hi List! I am just wondering whether anybody has a solution for following (admittedly minor) bug: When I cold-boot (doesn't matter whether PPC or Intel) with my emi 2|6 or reconnect the device the range of the mixer always is set to 0-50% while using the full range in the hardware. So 50% mixer-value is 100% volume. If the emi already has its firmware when booting (ie warm reboot), the mixer settings are right. when using the oss- audio-module this doesn't happen. I am using newest cvs-alsa (from yesterday) on Gentoo-1.4, SuSE-7.3 or debian-sarge (all the same). Thanks Niklas ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en