From: Bryan Whitehead Subject: Re: HOWTO Restart LPD Date: Thu, 08 May 2003 10:27:08 -0700 Sender: linux-newbie-owner@vger.kernel.org Message-ID: <3EBA936C.6080100@jpl.nasa.gov> References: <1052279439.8304.1.camel@jayhawk> <200305070940.44823.pfheiss@philonline.com> <200305080346.h483kdf02539@philonline.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200305080346.h483kdf02539@philonline.com> List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Peter Cc: J S , linux-newbie If your using CUPS then the service is "cups". "service cups restart" will restart it. or "service cups start" will just start it. for cups to start up automagically run this command: chkconfig --add cups Peter wrote: > Thanks! > > webnews@comcast.net said: > >>just use the script in /etc/init.d >>For example... >>/etc/init.d/lpd restart > > > That's the script used on booting where I get: Starting lpd: No Printers > Defined > > Doing "/etc/init.d/lpd start" from the command line I therefore get the same: > No Printers Defined. > Ergo before starting lpd a printer has to be defined first. > > Can that be done from the command line? > > > >>On Tue, 2003-05-06 at 21:40, Peter wrote: >>Hi, >>When cups has been activated for printing, then on rebooting lpd is >>not started anymore. >> >>How can I restart lpd from the command line instead of using printtool >>or printconf-tui? I can't find anything in man lpd. > > -- Bryan Whitehead SysAdmin - JPL - Interferometry and Large Optical Systems Phone: 818 354 2903 driver@jpl.nasa.gov - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs