From: Fredrik Lingvall Subject: DAC Direct Mode on ALi 5451 Date: Sun, 11 May 2003 20:23:48 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3EBE9534.9060203@signal.uu.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi! The Cirrus Logic CS4299 audio chip used in the ALi 5451 chipset has a DAC Direct Mode which sends the DAC output directly to the line output drivers. Does anyone know how to enable this mode? I have tried the alsamixer (and gnome-alsamixer) but there is no such switch in these apps. Background: I want to process the adio data from the ADC:s (eg. FIR filter the audio data) and then send the processed audio stream to the DAC:s and the line out on my laptop (Acer TM 636). To do this I must mute the PCM line in the mixer which otherwise feeds back into the ADC:s (see Figure 8.mixer diagram in: http://www.alsa-project.org/alsa/ftp/manuals/cirrus/cs4299-4.pdf) but this also kills the PCM output. However, if the DAC Direct Mode bit is set (bit 8 in the AC Mode Control Register (5Eh)) the PCM stream will be send to the line out by-passing the mixer. Fredrik ------------------------------------------------------- Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com