From: Pieter Palmers Subject: Re: Terratec Aureon Space Date: Mon, 19 May 2003 21:29:23 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3EC93093.1090003@student.kuleuven.ac.be> References: <200305170831.13014.zeb@zebulon.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=Big5 Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: =?Big5?B?IlrpYnVsb24gKGJ5IHdheSBvZiBa6WJ1bG9uIDw+KSI=?= Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Ze'bulon (by way of Ze'bulon <>) wrote: >>only if we get enough technical information... >> >>at least we need to know the wire connection between codec and ice1724 >>chips, especially 61, 62 and 63 pins of Wolfson chip and GPIO pins of >>ice1724 chip. >> >> > >Would it be possible to find it by analysing the circuits on the card itself > ? > > Chances are that this is possible. I did it for the maxistudio isis. You'll need a multimeter with a beep function and some common sense knowledge of which connections are most likely. Most PCI cards are 4 layer PCB's with power and ground distribution on the inner layer. This means that the signal traces are on the outside of the board, so you can use a magnifying glass to trace them. Using a digital camera with proper lighting works even better. You make a picture of the piece of board you want to analyze (of both sides of course), with a good resolution. This gives you a more 'stable' view of the traces. Pieter ------------------------------------------------------- This SF.net email is sponsored by: ObjectStore. If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge