From: =?ISO-8859-1?Q?Boris_Bartolom=E9?= Subject: Application to allow seamless connection to a network Date: Thu, 19 Jun 2003 18:22:51 +0200 Sender: netfilter-devel-admin@lists.netfilter.org Message-ID: <3EF1E35B.6090305@recherche.enac.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: To: netfilter-devel@lists.netfilter.org Errors-To: netfilter-devel-admin@lists.netfilter.org List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Id: netfilter-devel.vger.kernel.org Hello all, I am a long-time Linux user and a newbie programmer, but above all I am a network engineer trying to build a new network software using Linux. My main objective is to allow a user using 802.11 to seamlessly connect to my network. I would like the Linux box to accept any new laptop whatever his network configuration may be. If the user were configured as a DHCP client, then a DHCP server running in the Linux box would assign him an address (that's the easy part ...) If the user were configured with static network data then the box would kind of NAT whatever configuration the user has to the network parameters needed to establish a standard connection (IP address, DNS, proxy, ...) and "trick" all the network applications by sending out nicely configured packets for that user, mainly by using the user's MAC address as the identifier. I know this program has already been built in the commercial domain on VxWorks (see http://www.nomadix.com) I would like to know if: 1. That has already been done in the Linux world 2. If not, do you think netfilter would be a good basement onto which to build my application/kernel module. I am kind of lost now and would really appreciate any help you could give me. Best regards, Boris Bartolome