From: James Courtier-Dutton Subject: Audigy 2: How does one switch off the filters/interpolators? Date: Wed, 27 Aug 2003 17:39:20 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3F4CDEB8.6090806@superbug.demon.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel List-Id: alsa-devel@alsa-project.org Hi, I have started work on getting AC3 passthru working on the Audigy 2. So far I have established that some sort of filtering is happening between the computer PCM and the DSP. I can currently send samples to the DSP, and then grab them off the DSP into a file, and then compare the two. I have heard that there is a way to switch off the filtering/interpolating hardware so that passthru works. If I send the following samples: - 0 0 0 0 0x500 0x500 0x500 0x500 0x500 0x500 0x500 0x500 I get back something like 0 0 0 0 0x010 0x080 0x200 0x400 0x499 0x499 0x499 0x499 So, there is obviously a high pass filter in there to stop "click" sounds reaching the speakers. Can anybody describe how to switch off this filter/interpolator on the Audigy 2 ? Cheers James ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf