Return-Path: Received: from cpout1.tiscali.be (cpout1.tiscali.be [62.235.13.193]) by dsl2.external.hp.com (Postfix) with ESMTP id 34C3048B4 for ; Tue, 28 Oct 2003 01:39:52 -0700 (MST) Date: Tue, 28 Oct 2003 09:39:48 +0100 Message-ID: <3F98D67D00001BC1@ocpmta3.freegates.net> In-Reply-To: <20031027193911.GA16012@colo.lackof.org> From: "Joel Soete" Subject: Re: [parisc-linux] C110 builtin nic slow? To: "Grant Grundler" , "Matthew Wilcox" Cc: "parisc-linux" MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Grant, Matthew, >> >>On Sun, Oct 26, 2003 at 09:10:44PM +0000, Joel Soete wrote: >> How may I find and reset the speed setup of a nic (I mean which 10 or >> 100 Mb, half or full duplex)? > >ethtool? > I will check on my own pc (hp cards but don't remember the model) hmm I test here with a 3C905B (on an hp vectra) but: # ethtool eth0 Settings for eth0: No data available ??? (same results on a b180 with eth0: Digital DS21143 Tulip rev 65 [last kernel 2.4.21]) >> In a second though I just remember that the pc boot first (i need >> minicom console to boot c110) then latter the c110. So it could be that >> the first one is set in 100 half as default (no connection at boot time) >> and the second 10 half? > >shouldn't matter unless auto-negotiation is broken for one driver or >the other. If they are point-to-point, It is a cross-cable > I expect the negotiation to take place when the link is brought up with >the second NIC. I am curious to see if ethtool works for my pc's nic to check the behaviour on this side. Thanks for all info, Joel ------------------------------------------------------------------------- Tiscali ADSL: 3 mois GRATUITS! L'Internet rapide, c'est pour tout le monde. http://reg.tiscali.be/default.asp?lg=fr