From: =?UTF-8?B?QXJ0xatyYXMgxaBsYWp1cw==?= Date: Fri, 09 Jan 2004 07:23:21 +0000 Subject: Re: [LARTC] Random ping jumps Message-Id: <3FFE56E9.1030505@h2o.pieva.net> List-Id: References: <3FFC7969.1040103@h2o.pieva.net> In-Reply-To: <3FFC7969.1040103@h2o.pieva.net> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lartc@vger.kernel.org R. Steve McKown wrote: > What happens if you ping from the linux box to the linux box's default > gateway? If the problem doesn't exhibit in this test nor in any test between > machines in your LAN, the problem is probably your providers: the DSL modem > or something 'downstream' from it. You should consider doing tests #2 and #3 > anyway as support for your position when you call your ISP to open a trouble > ticket. It's not an ISP. Now it's morning and only 5 users online. The ping is flawless... Well almost :) Hostname Last 50 pings 1. adsl-213-190-40-129.taka ..........>....................................... 2. fe22-acc0-tai.kns.teleco ..........c...................................... 3. telecom-gw.is.lt ..........b...................................... 4. litnet-gw.is.lt .........3a...................................... 5. cat6506-p2-1.kttc.litnet .........b3...1a................................. 6. ktu-lan.litnet.lt .........c..........................1............ 7. diz.ktu.lt .........>......1................................ Scale: .:30 ms 1:46 ms 2:62 ms 3:99 ms a:193 ms b:283 ms c:441 ms > 2. plug a PC, configured as the linux router's eth0:1 interface (with proper > default gateway) and ping from the pc to the default gateway. If the problem > goes away, its probably the linux router (hardware or software). The problem goes away. I tried it here on my winxp box. > * security note * > > Running both your LAN and the internet provider subnets on the same ethernet > network puts you at a much greater security risk. You should seriously > consider installing a third network interface into your linux box and moving > eth0:1's ip info to eth2. Then plug the DSL modem into eth2 with a > cross-over cable with no computers attached. Huh, would be great, but there is one but. Modem is at one house and server is at another :) It's zyxel, maybe he has allow by mac or sth. I will look at his firmware setup. Or maybe you have some thoughts how to connect server and modem? (about 200 m) :) > I'm guessing your thirty users using Windows. If they have windows network > enabled, they are all generating broadcast traffic. That traffic will most > likely be crossing the DSL modem (since it is bridging). Aside from security > implications, the local traffic that does get bridged is tying up your DSL > bandwidth. It seems unlikely that 30 PC's could saturate your 128kbps > uplink, but I'm no expert on windows networking. 128kbps is not a huge pipe, > so perhaps it's possible. If so, the solution to your security problem is > also the solution to the latency variability issue. If this is the case, > both tests #2 and #3 will not show the variability, since your local LAN is > effectively removed from the test. Yes, this may be true and solution. But is C class subnet traffic routed? I think it isn't. It seems that when many users is browsing or doing normal day activities such as email checking and irc download/upload? is saturated and it causes ping jumps. I will try to move ACKs into front of queue and also prioritize some traffic. Bad that tc syntax is so unreadable.. Once it took 4 days for me to write tc script ;-) Also as roy mentioned, there is no such ip: 81.7.84.1 But if i set nexthop as my gw it says net unreachable... Maybe that gw has multiple addresses or some magic is done on ISP side. -- Sincerely, Artūras Šlajus ICQ: 157929934 Jabber: arturaz@akl.lt Oh, and please'o'please use UTF-8! :-) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/