From: Patrick DELAUNAY Date: Tue, 24 Mar 2020 08:51:53 +0000 Subject: [PATCH 9/9] ram: stm32mp1: the property st,phy-cal becomes optional In-Reply-To: <20200306101412.15376-2-patrick.delaunay@st.com> References: <20200306101412.15376-1-patrick.delaunay@st.com> <20200306101412.15376-2-patrick.delaunay@st.com> Message-ID: <3a0f6f4d3f87472eae7b92cea18c8030@SFHDAG6NODE3.st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, > From: Patrick DELAUNAY > Sent: vendredi 6 mars 2020 11:14 > > This parameter "st,phy-cal" becomes optional and when it is absent the built-in > PHY calibration is done. > > It is the case in the helper dtsi file "stm32mp15-ddr.dtsi" > except if DDR_PHY_CAL_SKIP is defined. > > This patch also impact the ddr interactive mode > - the registers of the param 'phy.cal' are initialized to 0 when > "st,phy-cal" is not present in device tree (default behavior when > DDR_PHY_CAL_SKIP is not activated) > - the info 'cal' field can be use to change the calibration behavior > - cal=1 => use param phy.cal to initialize the PHY, built-in training > is skipped > - cal=0 => param phy.cal is absent, built-in training is used (default) > > Signed-off-by: Patrick Delaunay > --- Applied to u-boot-stm/next, thanks! Regards Patrick