From: Frederico Faria Subject: XOT Configuration Date: Fri, 16 Jan 2004 08:50:16 -0200 Sender: linux-x25-owner@vger.kernel.org Message-ID: <4007C1E8.7040003@ati.com.br> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-x25@vger.kernel.org Hi, I have two linux box that communicate using X25 sockets over lapb-ethernet. The hostA runs the X25 socket client application and hostB runs the x25 server socket application: hostA --------- LAPB ( ethernet )--------hostB. This configuration is working fine! Now I want to configure the XOT ( using xotd daemon ) for the link between hostA and hostB. My X25 route configured in "hostA" is: route add -Ax25 33/2 lapb0 //33 is the X25 addr. of server in "hostB" Then I run xotd in "hostA" as: xotd -v lapb0 IP-HOSTB // IP-HOSTB is the IP address of "hostB" The X25 route in "hostB" is: route add -Ax25 0/0 lapb0 In "hostB" I didn't run the xotd daemon. Then I run again the sockets applications and everything continues working fine, but nothing to appear in xotd debug. Then I think that the XOT isn't being used. My doubt is How configure the two x25 linux box above to use the XOT. Is the hostA xotd configuration correct ? do I need to run the xotd daemon in host B ? is it necessary some modification in X25 socket applications ? Is there any configuration example ? Thank you, Faria -- Frederico Charles S. Faria ATI / ATITEL Ltda www.ati.com.br (31) - 3275-3100