From: =?UTF-8?B?QXJ0xatyYXMgxaBsYWp1cw==?= Date: Thu, 22 Jan 2004 17:39:46 +0000 Subject: Re: [LARTC] HTB and VOIP- Choppy voice quality: What am I doing wrong? Message-Id: <40100AE2.80303@h2o.pieva.net> List-Id: References: <005a01c3e041$2c6023a0$e40a0a0a@bmi2541.com> In-Reply-To: <005a01c3e041$2c6023a0$e40a0a0a@bmi2541.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Dan White wrote: > All of the gateways are set up properly, and I can communicate in > all directions, and can place calls clearly when the traffic is low. Now > here is my problem. When I dump a big file over the fiber link, the > voice quality goes down considerably. I hit "cancel" on the file, the > quality is back. Does VoIP set quality automaticaly by latency or traffic capabilities? > Here is what I know about the Inter-Tel VOIP box we > use: it uses UDP streams on ports 5000-5018 and 16384 @ 8-18k per side, > per call, over 7 possible channels. Each site has 7 channels, which are > rarely all in use. So, the total bandwidth should be, at max (18k x 2 > directions x 7 channels) is 252k I came in on Saturday alone, and was > able to kill the quality with one call, and one 1gb file in transit. I > have set HTB up as follows: > > ( 1: ) > (1:1) (1:2) > (1:10) (1:11)(1:12) > > Here is my script, it is the same at all 3 sites > http://208.45.203.97/script.txt You have many u32 filters. It's not an issue, but i usualy get with fw and marking packets in iptables. That would make script much easier to read. Example follows: # $IPT -t mangle -A FORWARD -s $LAN_NET -d $ADDR -i $LAN -o $PARABOLE -j MARK --set-mark 20 # tc filter add dev $LAN protocol ip parent 1:0 prio 1 handle 20 fw flowid 1:20 > (I would post it, but it is pretty > long). As you can see I have given 80mbit to the phones (remember, they > should only need 252k!), 16mbit to default, and cut windows file sharing > back to 1mbit, but I still have voice issues during file transfers! I > know the filters are catching the traffic (I did "tc -s -d class show > dev eth1" and watched my numbers while calling, and transferring files, > and the incremented properly). Well, did you try assigning priorities of sending? There should be something as prio (cosult HTB manual). If real, i don't know "The Real Solution", I'm just trying to help :) I had no expierence with VoIP. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/