Return-Path: Received: from sog-mx-1.v43.ch3.sourceforge.com ([172.29.43.191] helo=mx.sourceforge.net) by sfs-ml-3.v29.ch3.sourceforge.com with esmtp (Exim 4.76) (envelope-from ) id 1WCrxt-0004oL-Q9 for ltp-list@lists.sourceforge.net; Mon, 10 Feb 2014 14:36:05 +0000 Received: from mx3-phx2.redhat.com ([209.132.183.24]) by sog-mx-1.v43.ch3.sourceforge.com with esmtp (Exim 4.76) id 1WCrxr-0004NG-Kr for ltp-list@lists.sourceforge.net; Mon, 10 Feb 2014 14:36:05 +0000 Date: Mon, 10 Feb 2014 09:35:57 -0500 (EST) From: Jan Stancek Message-ID: <404815959.572342.1392042957279.JavaMail.zimbra@redhat.com> In-Reply-To: <52F83C96.9090802@oracle.com> References: <1386750816-782-1-git-send-email-xu.simon@oracle.com> <52BA386D.50903@oracle.com> <52DDD0D9.40309@oracle.com> <2063328347.1666006.1391079813144.JavaMail.root@redhat.com> <52F83C96.9090802@oracle.com> MIME-Version: 1.0 Subject: Re: [LTP] [PATCH] ip_tests.sh: fix errors List-Id: Linux Test Project General Discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: ltp-list-bounces@lists.sourceforge.net To: Simon Xu Cc: ltp-list@lists.sourceforge.net ----- Original Message ----- > From: "Simon Xu" > To: "Jan Stancek" > Cc: ltp-list@lists.sourceforge.net > Sent: Monday, 10 February, 2014 3:42:30 AM > Subject: Re: [LTP] [PATCH] ip_tests.sh: fix errors > > On 2014/1/30 19:03, Jan Stancek wrote: > > > > ----- Original Message ----- > >> From: "Simon Xu" > >> To: ltp-list@lists.sourceforge.net > >> Sent: Tuesday, 21 January, 2014 2:43:53 AM > >> Subject: Re: [LTP] [PATCH] ip_tests.sh: fix errors > >> > >> Could anyone help to review this? > >> > >> Thanks > >> Simon > >> > >> On 2013/12/25 9:44, Simon Xu wrote: > >>> Could anyone help to review this? > >>> > >>> Thanks > >>> Simon > >>> > >>> On 2013/12/11 16:33, Simon Xu wrote: > >>>> 1) Eliminate '|| RC=$?' because because it may not be excecuted and the > >>>> original value in RC can mess things up. > > Hi, > > > > "original value in RC can mess things up" > > Can you elaborate on this? Isn't original value (initialized to) 0? > > It's been a while since I created the patch, I remember I had some issue > where a command succeeds but test fails because RC was not 0 before the > command executes. Anyway, I think > > RC=0 > ... > ... > command || RC=$? > check RC value > > is bad design. It's error prone. While > > command > RC=$? > check RC value > > is simple and robust. I see what you mean, it's easier to make new bug if you're not careful with RC at every single place. The rest looks good to me: Acked-by: Jan Stancek Regards, Jan > > > Thanks > Simon > > >> Also remove the RC=0 > >>>> initializations that are now unnecessary. > >>>> 2) Exit test immediately with non-zero return code when a test fails. > >>>> 3) Add missing parameters in calling tst_brk and tst_brkm > >>>> > >>>> Signed-off-by: Simon Xu > >>>> --- > >>>> testcases/network/iproute/ip_tests.sh | 128 > >>>> ++++++++++++++++++++-------------- > >>>> 1 file changed, 74 insertions(+), 54 deletions(-) > >>>> > >>>> diff --git a/testcases/network/iproute/ip_tests.sh > >>>> b/testcases/network/iproute/ip_tests.sh > >>>> index 0416300..ed20540 100755 > >>>> --- a/testcases/network/iproute/ip_tests.sh > >>>> +++ b/testcases/network/iproute/ip_tests.sh > >>>> @@ -45,7 +45,6 @@ set +x > >>>> init() > >>>> { > >>>> > >>>> - export RC=0 # Return code from commands. > >>>> export TST_TOTAL=2 # total numner of tests in this file. > >>>> export TCID="ip_tests " # this is the init function. > >>>> export TST_COUNT=0 # init identifier, > >>>> @@ -61,15 +60,17 @@ init() > >>>> trap "cleanup" 0 > >>>> > >>>> # create the tmp directory for this testcase. > >>>> - mkdir -p $LTPTMP/ >/dev/null 2>&1 || RC=$? > >>>> + mkdir -p $LTPTMP/ >/dev/null 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> - tst_brkm TBROK "INIT: Unable to create temporary directory" > >>>> + tst_brkm TBROK NULL "INIT: Unable to create temporary directory" > >>>> return $RC > >>>> fi > >>>> > >>>> # Check to see if test harness functions are in the path. > >>>> - which tst_resm >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + which tst_resm >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brkm TBROK NULL \ > >>>> @@ -77,7 +78,8 @@ init() > >>>> return $RC > >>>> fi > >>>> > >>>> - which awk >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + which awk >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brkm TBROK NULL \ > >>>> @@ -85,7 +87,8 @@ init() > >>>> return $RC > >>>> fi > >>>> > >>>> - which ip >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + which ip >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brkm TBROK NULL \ > >>>> @@ -93,7 +96,8 @@ init() > >>>> return $RC > >>>> fi > >>>> > >>>> - which ifconfig >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + which ifconfig >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brkm TBROK NULL \ > >>>> @@ -104,24 +108,25 @@ init() > >>>> tst_resm TINFO "INIT: Inititalizing tests." > >>>> > >>>> # Aliasing eth0 to create private network. > >>>> - /sbin/ifconfig eth0:1 10.1.1.12 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + /sbin/ifconfig eth0:1 10.1.1.12 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> - tst_brk TBROK "INIT: failed aliasing eth0:1 with IP 10.1.1.12" > >>>> + tst_brk TBROK NULL NULL "INIT: failed aliasing eth0:1 with IP > >>>> 10.1.1.12" > >>>> return $RC > >>>> else > >>>> - /sbin/route add -host 10.1.1.12 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 \ > >>>> - || RC=$? > >>>> + /sbin/route add -host 10.1.1.12 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> - tst_brk TBROK "INIT: failed adding route to 10.1.1.12" > >>>> + tst_brk TBROK NULL NULL "INIT: failed adding route to 10.1.1.12" > >>>> return $RC > >>>> else > >>>> tst_resm TINFO "INIT: added alias: `ifconfig eth0:1`" > >>>> fi > >>>> fi > >>>> > >>>> - cat > $LTPTMP/tst_ip02.exp <<-EOF || RC=$? > >>>> + cat > $LTPTMP/tst_ip02.exp <<-EOF > >>>> 1: > >>>> link/loopback > >>>> 2: > >>>> @@ -129,7 +134,7 @@ init() > >>>> 3: > >>>> link/ether > >>>> EOF > >>>> - > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brkm TBROK NULL "INIT: failed creating expected output for > >>>> test02" > >>>> @@ -151,9 +156,9 @@ cleanup() > >>>> { > >>>> TCID=dhcpd > >>>> TST_COUNT=0 > >>>> - RC=0 > >>>> > >>>> - /sbin/ifconfig eth0:1 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + /sbin/ifconfig eth0:1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -eq 0 ] > >>>> then > >>>> /sbin/ifconfig eth0:1 down >$LTPTMP/tst_ip.err 2>&1 > >>>> @@ -178,7 +183,6 @@ cleanup() > >>>> > >>>> test01() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip01 # Name of the test case. > >>>> TST_COUNT=1 # Test number. > >>>> > >>>> @@ -225,7 +229,6 @@ test01() > >>>> > >>>> test02() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip02 # Name of the test case. > >>>> TST_COUNT=2 # Test number. > >>>> > >>>> @@ -236,7 +239,8 @@ test02() > >>>> tst_resm TINFO \ > >>>> "Test #2: Installing dummy.o in kernel" > >>>> > >>>> - modprobe dummy >$LTPTMP/tst_ip.out 2>&1 || RC=$? > >>>> + modprobe dummy >$LTPTMP/tst_ip.out 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brk TBROK $LTPTMP/tst_ip.out NULL \ > >>>> @@ -244,7 +248,8 @@ test02() > >>>> return $RC > >>>> fi > >>>> > >>>> - ip link show dummy0 | grep dummy0 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip link show dummy0 | grep dummy0 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err "Test #2: ip command failed. > >>>> Reason:" > >>>> @@ -275,14 +280,14 @@ test02() > >>>> > >>>> test03() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip03 # Name of the test case. > >>>> TST_COUNT=3 # Test number. > >>>> > >>>> tst_resm TINFO \ > >>>> "Test #3: ip addr add - adds a new protolcol address to the > >>>> device" > >>>> > >>>> - ip addr add 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip addr add 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -291,7 +296,8 @@ test03() > >>>> else > >>>> tst_resm TINFO \ > >>>> "Test #3: ip addr show dev - shows protocol address." > >>>> - ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 || > >>>> RC=$? > >>>> + ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -301,14 +307,16 @@ test03() > >>>> > >>>> tst_resm TINFO \ > >>>> "Test #3: ip addr del dev - deletes protocol > >>>> address." > >>>> - ip addr del 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip addr del 127.6.6.6 dev lo >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> "Test #3: ip addr del command failed. Reason: " > >>>> return $RC > >>>> else > >>>> - ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 || > >>>> RC=$? > >>>> + ip addr show dev lo | grep 127.6.6.6 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -eq 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -342,14 +350,14 @@ test03() > >>>> > >>>> test04() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip04 # Name of the test case. > >>>> TST_COUNT=4 # Test number. > >>>> > >>>> tst_resm TINFO \ > >>>> "Test #4: ip neigh add - adds a new neighbour to arp tables." > >>>> > >>>> - ip neigh add 127.0.0.1 dev lo nud reachable >$LTPTMP/tst_ip.err 2>&1 > >>>> || > >>>> RC=$? > >>>> + ip neigh add 127.0.0.1 dev lo nud reachable >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -363,7 +371,8 @@ test04() > >>>> 127.0.0.1 dev lo lladdr 00:00:00:00:00:00 REACHABLE > >>>> EOF > >>>> > >>>> - ip neigh show 127.0.0.1 | head -n1 >$LTPTMP/tst_ip.out 2>&1 || RC=$? > >>>> + ip neigh show 127.0.0.1 | head -n1 >$LTPTMP/tst_ip.out 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -371,7 +380,8 @@ test04() > >>>> return $RC > >>>> else > >>>> diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \ > >>>> - >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res FAIL $LTPTMP/tst_ip.err \ > >>>> @@ -383,14 +393,16 @@ test04() > >>>> tst_resm TINFO \ > >>>> "Test #4: ip neigh del - deletes neighbour from the arp table." > >>>> > >>>> - ip neigh del 127.0.0.1 dev lo >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip neigh del 127.0.0.1 dev lo >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> "Test #4: ip neigh del command failed return = $RC. Reason: " > >>>> return $RC > >>>> else > >>>> - ip neigh show | grep 127.0.0.1 | grep -v " FAILED$" > >>>>> $LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip neigh show | grep 127.0.0.1 | grep -v " FAILED$" > >>>>> $LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -eq 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -423,7 +435,6 @@ test04() > >>>> > >>>> test05() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip05 # Name of the test case. > >>>> TST_COUNT=5 # Test number. > >>>> > >>>> @@ -434,7 +445,8 @@ test05() > >>>> tst_resm TINFO \ > >>>> "Test #5: create an interface with inet 10.6.6.6 alias to eth0" > >>>> > >>>> - ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err > >>>> 2>&1 > >>>> || RC=$? > >>>> + ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err > >>>> 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brk TBROK $LTPTMP/tst_ip.err NULL \ > >>>> @@ -442,7 +454,8 @@ test05() > >>>> return $RC > >>>> fi > >>>> > >>>> - ip route add 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip route add 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -458,7 +471,8 @@ test05() > >>>> EOF > >>>> > >>>> ip route show | grep "10.6.6.6 via 127.0.0.1 dev lo" \ > >>>> - >$LTPTMP/tst_ip.out 2>&1 || RC=$? > >>>> + >$LTPTMP/tst_ip.out 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -466,7 +480,8 @@ test05() > >>>> return $RC > >>>> else > >>>> diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \ > >>>> - >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res FAIL $LTPTMP/tst_ip.err \ > >>>> @@ -478,14 +493,16 @@ test05() > >>>> tst_resm TINFO \ > >>>> "Test #5: ip route del - deletes route from the route table." > >>>> > >>>> - ip route del 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip route del 10.6.6.6 via 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> "Test #5: ip route del command failed return = $RC. Reason: " > >>>> return $RC > >>>> else > >>>> - ip route show | grep 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 || RC=$? > >>>> + ip route show | grep 127.0.0.1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -eq 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -518,14 +535,14 @@ test05() > >>>> > >>>> test06() > >>>> { > >>>> - RC=0 # Return value from commands. > >>>> TCID=ip06 # Name of the test case. > >>>> TST_COUNT=6 # Test number. > >>>> > >>>> tst_resm TINFO \ > >>>> "Test #6: ip maddr add - adds a new multicast addr" > >>>> > >>>> - ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err > >>>> 2>&1 > >>>> || RC=$? > >>>> + ifconfig eth0:1 10.6.6.6 netmask 255.255.255.0 >$LTPTMP/tst_ip.err > >>>> 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_brk TBROK $LTPTMP/tst_ip.err NULL \ > >>>> @@ -533,7 +550,8 @@ test06() > >>>> return $RC > >>>> fi > >>>> > >>>> - ip maddr add 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 || > >>>> RC=$? > >>>> + ip maddr add 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -547,7 +565,8 @@ test06() > >>>> link 66:66:00:00:00:66 static > >>>> EOF > >>>> > >>>> - ip maddr show | grep "66:66:00:00:00:66" >$LTPTMP/tst_ip.out 2>&1 || > >>>> RC=$? > >>>> + ip maddr show | grep "66:66:00:00:00:66" >$LTPTMP/tst_ip.out 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -555,7 +574,8 @@ test06() > >>>> return $RC > >>>> else > >>>> diff -iwB $LTPTMP/tst_ip.out $LTPTMP/tst_ip.exp \ > >>>> - &>$LTPTMP/tst_ip.err || RC=$? > >>>> + &>$LTPTMP/tst_ip.err > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res FAIL $LTPTMP/tst_ip.err \ > >>>> @@ -567,15 +587,16 @@ test06() > >>>> tst_resm TINFO \ > >>>> "Test #6: ip maddr del - deletes multicast addr." > >>>> > >>>> - ip maddr del 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 || > >>>> RC=$? > >>>> + ip maddr del 66:66:00:00:00:66 dev eth0:1 >$LTPTMP/tst_ip.err 2>&1 > >>>> + RC=$? > >>>> if [ $RC -ne 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> "Test #6: ip maddr del command failed return = $RC. Reason: " > >>>> return $RC > >>>> else > >>>> - ip maddr show | grep "66:66:00:00:00:66" &>$LTPTMP/tst_ip.err \ > >>>> - || RC=$? > >>>> + ip maddr show | grep "66:66:00:00:00:66" &>$LTPTMP/tst_ip.err > >>>> + RC=$? > >>>> if [ $RC -eq 0 ] > >>>> then > >>>> tst_res TFAIL $LTPTMP/tst_ip.err \ > >>>> @@ -599,15 +620,14 @@ test06() > >>>> # Exit: - zero on success > >>>> # - non-zero on failure. > >>>> TFAILCNT=0 # Set TFAILCNT to 0, increment on failure. > >>>> -RC=0 # Return code from test. > >>>> > >>>> init || exit $RC > >>>> > >>>> -test01 || RC=$? > >>>> -test02 || RC=$? > >>>> -test03 || RC=$? > >>>> -test04 || RC=$? > >>>> -test05 || RC=$? > >>>> -test06 || RC=$? > >>>> +test01 || exit $RC > >>>> +test02 || exit $RC > >>>> +test03 || exit $RC > >>>> +test04 || exit $RC > >>>> +test05 || exit $RC > >>>> +test06 || exit $RC > >>>> > >>>> -exit $RC > >>>> +exit 0 > >> ------------------------------------------------------------------------------ > >> CenturyLink Cloud: The Leader in Enterprise Cloud Services. > >> Learn Why More Businesses Are Choosing CenturyLink Cloud For > >> Critical Workloads, Development Environments & Everything In Between. > >> Get a Quote or Start a Free Trial Today. > >> http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk > >> _______________________________________________ > >> Ltp-list mailing list > >> Ltp-list@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/ltp-list > >> > > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list