From: Jiri Fojtasek Date: Thu, 01 Apr 2004 16:45:45 +0000 Subject: Re: [LARTC] wireless sta MAC NAT Message-Id: <406C4739.4010108@hlohovec.net> List-Id: References: <406C55CB.6040009@actinium.org> In-Reply-To: <406C55CB.6040009@actinium.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello I using for this stuff application "parprouted": http://freshmeat.net/projects/parprouted/?topic_id0 Lim Kee Chian wrote: > Hi all, > > not sure this should be post here.... but i hope some one could help > me. :> > > I'm newbie in the ebtables MAC address NAT and filtering stuff... > i want to bridge a wireless client to a wired network, problem is AP > would not accept frame not initiate from associated STA... so i guess > i could solve it by natting mac with ebtables stuff.. > > question goes below.... > 1. wat's the command need to do MAC NAT ? > 2. can multiple wired devices utilise the wireless sta bridge after > mac nat (wired port connected to a hub, switch ... etc)? > > i have the latest patch for bridge-nf kernel 2.4.20 + ebtables v2.0.6 > > hope u guys could help, thanks in advance > > regards, > lim k.c. > > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > Zkontrolovane antivirusom ClamAv > Scanned by ClamAv - http://www.clamav.net > Zkontrolovane antivirusom ClamAv Scanned by ClamAv - http://www.clamav.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/