From: James Courtier-Dutton Subject: Question regarding substreams or voices Date: Sat, 29 May 2004 16:05:05 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <40B8A6A1.1030005@superbug.demon.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel List-Id: alsa-devel@alsa-project.org Hi, I am trying to do work on the Audigy LS driver. I have now discovered that I can send sound to the Front, Rear and Center/LFE. I have not found out how to set the amount of interleaved channels that the sound card can do, so it is fixed at 2 channels per stream. The sound card has 4 voices for 4 separate stereo streams. Each voice has it's own DMA and HW pointer. voice 0 sends sound to the Front speakers. voice 1 sends sound to the Center/LFE speakers. voice 2 sends sound to unknown, (no sound comes out yet) voice 3 sends sound to the Rear speakers. There does not appear to be any hardware mixing, so each voice can only be opened once. Should this be set up as: - 1) /proc/asound/card0/pcm0p info sub0 sub1 sub2 sub3 or instead ? 2) /proc/asound/card0/pcm0p /proc/asound/card0/pcm1p /proc/asound/card0/pcm2p /proc/asound/card0/pcm3p I think (2) is the correct way, so I will make a start using that method. Cheers James ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click