From: Mr Ivan Hawkes Date: Mon, 31 May 2004 18:00:32 +0000 Subject: Re: [LARTC] Wondershaper - question Message-Id: <40BB72C0.6040800@ivanhawkes.com> List-Id: References: <075301c44728$34740860$016414ac@farnelia> In-Reply-To: <075301c44728$34740860$016414ac@farnelia> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Matthias Lendholt wrote: Those are port lists, not the line speed. They should be more like NOPRIOPORTDST="53 21 22" or similar. Check the docs for more help on it. > Hi, > I have a question conercing wondershaper. I'm using the Clarkconnect linux > distribution for my linux router and I tried to use wondershaper. > > On start up of wshaper, there are no errors or any other problems but I'm > not sure if it's running correctly. Only one qdisc / one class is used and > when I start an uplink ftp transfer, my ping time is growing up to 1700ms - > I don't think that there is anything shaped oder scheduled. > > In the wshaper file I set the up- and downlink values and for the p2p I set > this: > # low priority source ports > NOPRIOPORTSRCF62 > > # low priority destination ports > NOPRIOPORTDSTF62 -- http://www.ivanhawkes.com | ICQ: 173-392-038 _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/